Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

MIC5891YWM-TR

Manufacturer

Microchip Technology
Manufacturer's Part Number

MIC5891YWM-TR
Description

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

CC0603KRX7R9BB104

Yageo

Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.

Details

1N4148

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N2222A

Digitron Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

CRGCQ0805F10R

TE Connectivity

TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.

Details

U.FL-R-SMT-1(10)

Hirose Electric

U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.

Details

1N4148

American Power Devices

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SMBJ18CA

Jgd Semiconductors

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;

Details

BAV99

Yangzhou Yangjie Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M39029/56-351

Itt Cannon

CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;

Details

2N7002

National Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;

Details

ULN2803A

STMicroelectronics

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;

Details

STM32F405RGT6

STMicroelectronics

STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.

Details

1N4148

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148

Surge Components

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

ULN2803A

Allegro MicroSystems

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;

Details

M39029/58360

Souriau

CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;

Details

LM358DT

STMicroelectronics

LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.

Details

BAV99WT1G

Onsemi

BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.

Details

2N2222A

Space Power Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

CRG0805F10K

Tyco Electronics Components

FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;

Details

MIC5891YWM-TR Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	5 V
Package Body Material:	PLASTIC/EPOXY
Output Characteristics:	OPEN-EMITTER
Maximum Time At Peak Reflow Temperature (s):	40
Maximum Seated Height:	2.64 mm
Surface Mount:	YES
Maximum Supply Current:	3 mA
Terminal Finish:	MATTE TIN
No. of Terminals:	16
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
Technology:	BICMOS
JESD-30 Code:	R-PDSO-G16
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Built-in Protections:	TRANSIENT
Maximum Operating Temperature:	85 Cel
Package Code:	SOP
Interface IC Type:	BUFFER OR INVERTER BASED PERIPHERAL DRIVER
Width:	7.52 mm
Nominal Supply Voltage-1:	50 V
Turn-off Time:	10 us
Moisture Sensitivity Level (MSL):	3
Output Polarity:	TRUE
Input Characteristics:	STANDARD
Driver No. of Bits:	8
Maximum Supply Voltage:	12 V
Turn-on Time:	2 us
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Qualification:	Not Qualified
Package Equivalence Code:	SOP16,.40
Output Current Flow Direction:	SOURCE
Length:	10.34 mm
Peak Reflow Temperature (C):	260
Terminal Pitch:	1.27 mm
Temperature Grade:	INDUSTRIAL

Category Top Products

IPS160HTR

STMicroelectronics

STMicroelectronics' IPS160HTR is a 12-terminal peripheral driver with 2.5A output current, suitable for various applications. It operates on 8-36V power supplies and features a small outline package style. The interface IC type is buffer or inverter based, making it ideal for electronic systems requiring high-current drive capabilities.

L298HN

STMicroelectronics

L298HN by STMicroelectronics is a full bridge peripheral driver with 2 functions, operating at 5V nominal voltage and 46V max supply voltage. It features built-in over current protection, totem-pole output characteristics, and source/sink output current flow direction. Ideal for applications requiring high-power motor control in robotics or automation systems.

ULN2803

First Components International

Peripheral Drivers; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;

FPF2105

Fairchild Semiconductor

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;

MIC5841YN

Microchip Technology

MIC5841YN by Microchip Technology is an 8-bit SIPO-based peripheral driver with inverted output polarity. It operates at a nominal voltage of 5V and has a max supply current of 16mA. Ideal for industrial applications, it offers built-in transient protections and sink output current flow direction.

SI9986DY-T1-E3

Vishay Intertechnology

Vishay Intertechnology's SI9986DY-T1-E3 is a half bridge based peripheral driver with a supply voltage range of 3.8V to 13.2V and operating temperature from -40°C to 85°C. It features source and sink output current flow direction, making it ideal for industrial applications requiring precise control in compact spaces.

IRS2113PBF

Infineon Technologies

IRS2113PBF by Infineon Technologies is a peripheral driver with a max supply voltage of 20V and built-in transient and under voltage protections. It operates in automotive-grade temperatures, has a turn-on time of 0.16us, and is commonly used as a buffer or inverter-based peripheral driver in various applications.

MIC2981/82YWM

Microchip Technology

MIC2981/82YWM by Microchip Technology is an 8-function peripheral driver with a max supply voltage of 50V. It features built-in transient protections and operates in industrial temperature grades. This small outline package driver has a turn-on time of 2us and turn-off time of 10us, making it ideal for various applications requiring source current flow direction.

ITS41K0SMENHUMA1

Infineon Technologies

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 3; Terminal Finish: TIN;

ISP752RFUMA1

Infineon Technologies

ISP752RFUMA1 by Infineon Technologies is a peripheral driver with 8 terminals and built-in protections. It operates b/w -30 to 85 °C, with a supply voltage range of 6-52 V. Ideal for applications requiring a small outline package style and sink output current flow direction.

TPS4H000AQPWPRQ1

Texas Instruments

TPS4H000AQPWPRQ1 by Texas Instruments is a Peripheral Driver with 4 functions, operating at -40 to 125 °C. It has built-in protections for transient, over current, thermal & under voltage. Ideal for automotive applications due to AEC-Q100 screening & high side driver feature.

VN7003AHTR

STMicroelectronics

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;

ULN2003ADR2G

Rochester Electronics

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Output Polarity: INVERTED;

VND5025AKTR-E

STMicroelectronics

VND5025AKTR-E by STMicroelectronics is a 36V peripheral driver with 2 functions, built-in protections, and CMOS technology. It has a supply voltage range of 8-36V, suitable for buffer or inverter-based applications. The small outline package with gull wing terminals makes it ideal for compact designs requiring source current flow direction.

FPF2701MX

Fairchild Semiconductor

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

ULN2004AS16-13

Diodes Incorporated

Diodes Inc. ULN2004AS16-13 is a 7-bit buffer/inverter peripheral driver with open-collector output, designed for sink current flow direction. It operates b/w -40 to 105°C, with a max supply voltage of 13V and a turn-on/off time of 10µs. Ideal for applications requiring transient protection in compact designs.

VNN7NV04PTR-E

STMicroelectronics

STMicroelectronics VNN7NV04PTR-E is a 5-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It has a small outline package style with gull wing terminal form and matte tin finish. Ideal for applications requiring a buffer or inverter-based interface IC with nominal output peak current limit of 9A.

ULN2803AN

Taejin Technology

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Shape: RECTANGULAR; Nominal Output Peak Current Limit: .5 A; No. of Functions: 1;

TPS25221DBVR

Texas Instruments

TPS25221DBVR by Texas Instruments is a small outline, low profile peripheral driver with thermal protection. It operates in automotive temperature grades from -40 to 125°C. With turn-on time of 3000us and turn-off time of 700us, it's ideal for buffer or inverter based applications.

NCP339AFCT2G

Onsemi

NCP339AFCT2G by Onsemi is a 6-terminal peripheral driver with a max output current of 3A. It operates in industrial temperature range (-40 to 85°C) and supports power supplies from 1.2V to 5.5V. The package style is grid array, fine pitch, making it suitable for various applications requiring precise voltage control and thermal management.