Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

L298HN

Manufacturer

STMicroelectronics
Manufacturer's Part Number

L298HN
Description

FULL BRIDGE BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Shape: RECTANGULAR; Output Current Flow Direction: SOURCE AND SINK; Technology: BIPOLAR;
Datasheet

Datasheet

Not In Stock

Popular Products

1N4148

Sensitron Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

MMBT3906LT1G

Onsemi

MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.

Details

LIS3DHTR

STMicroelectronics

LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.

Details

RC0402FR-0710KL

Yageo

Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.

Details

2N7002

Vishay Intertechnology

2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.

Details

SMBJ18CA

Lite-on Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

CGA3E2X7R1H104K080AA

TDK

CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.

Details

1N4148WS

Sinyork

RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;

Details

DS18B20Z+

Analog Devices

DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.

Details

USB3320C-EZK-TR

Standard Microsystems

INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;

Details

1N4148

Tak Cheong Electronics Holdings

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148WS

Meritek Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Vishay Telefunken

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

1N4148WS

Formosa Microsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M39029/56-351

Carlisle Interconnect Technologies

CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;

Details

BAV99

Meritek Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WT

Surge Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MBRM140T1G

Onsemi

MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.

Details

MBRA160T3G

Onsemi

MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.

Details

1N4148WS

Multicomp Pro

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

L298HN Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	4.5 V
Package Body Material:	CERAMIC, METAL-SEALED COFIRED
Minimum Supply Voltage-1:	4.8 V
Nominal Supply Voltage:	5 V
Output Characteristics:	TOTEM-POLE
Surface Mount:	NO
Terminal Finish:	MATTE TIN
No. of Terminals:	8
Terminal Position:	DUAL
Package Style (Meter):	IN-LINE
Technology:	BIPOLAR
JESD-30 Code:	R-XZFM-T15
Package Shape:	RECTANGULAR
Terminal Form:	THROUGH-HOLE
Built-in Protections:	OVER CURRENT
Interface IC Type:	FULL BRIDGE BASED PERIPHERAL DRIVER
Nominal Supply Voltage-1:	42 V
Maximum Supply Voltage-1:	46 V
Output Polarity:	TRUE
Input Characteristics:	STANDARD
Maximum Supply Voltage:	7 V
JESD-609 Code:	e3
No. of Functions:	2
Qualification:	Not Qualified
Output Current Flow Direction:	SOURCE AND SINK

Category Top Products

SZNUD3124LT1G

Onsemi

SZNUD3124LT1G by Onsemi is a Peripheral Driver with 2 functions, AEC-Q101 screening level, and built-in transient protection. It has 6 terminals, operates b/w -40 to 125 °C, and supports a supply voltage of 28 V. Ideal for applications requiring BUFFER OR INVERTER BASED PERIPHERAL DRIVER interface ICs.

TPIC6B595DWRG4

Texas Instruments

TPIC6B595DWRG4 by Texas Instruments is an 8-bit register-based peripheral driver with a max supply voltage of 5.5V and output current flow direction as sink. It has built-in transient protections, operates in automotive temperature grade range (-40 to 125 °C), and is ideal for applications requiring open-drain output characteristics.

ULN2003ADR2G

Rochester Electronics

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Output Polarity: INVERTED;

ULN2004AIN

Texas Instruments

ULN2004AIN by Texas Instruments is a peripheral driver with 7 functions. It has a max supply voltage of 8V and can operate in temperatures ranging from -40°C to 105°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.

SN75451BDRE4

Texas Instruments

SN75451BDRE4 by Texas Instruments is a peripheral driver with 2 functions, operating at 5V. It has a max supply voltage of 5.25V and output current of 0.5A. Ideal for applications requiring AND gate based peripheral drivers in commercial temperature grades.

IR2085STRPBF

International Rectifier

HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

VNQ5027AKTR-E

STMicroelectronics

STMicroelectronics' VNQ5027AKTR-E is a 4-function peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates within a supply voltage range of 8-36V and has a turn-on/off time of 40us. This CMOS technology-based driver is ideal for applications requiring SOURCE output current flow direction.

VN820SP-E

STMicroelectronics

VN820SP-E by STMicroelectronics is a MOS technology-based peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates within a power supply range of 8-36V and can handle a max output current of 9A. This rectangular-shaped driver in small outline package style is ideal for applications requiring source flow direction such as buffer or inverter based interface ICs.

AD5749ACPZ-RL7

Analog Devices

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;

FDC6324L

Fairchild Semiconductor

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; Qualification: Not Qualified;

VNQ5050KTR-E

STMicroelectronics

STMicroelectronics VNQ5050KTR-E is a 4-function peripheral driver with max supply voltage of 36V and output current of 2A. It features built-in protections for transient, over current, over voltage, thermal, and under voltage. Ideal for applications requiring SOURCE flow direction in small outline package style.

VNQ660SP-E

STMicroelectronics

STMicroelectronics' VNQ660SP-E is a MOS technology peripheral driver with 6A output current, suitable for 6-24V power supplies. It features a small outline package with 10 terminals in gull wing form, ideal for surface mount applications.

AUIPS2041LTR

International Rectifier

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Code: SOP; Package Shape: RECTANGULAR; Built-in Protections: TRANSIENT; OVER CURRENT; THERMAL;

BSP742T

Infineon Technologies

BSP742T by Infineon Technologies is a peripheral driver with a max supply voltage of 34V. It has built-in protections for transient, over current, over voltage, thermal, and under voltage conditions. This small outline MOS technology driver is commonly used as a buffer or inverter based peripheral driver in various applications.

VN5E160ASTR-E

STMicroelectronics

VN5E160ASTR-E by STMicroelectronics is a peripheral driver with a max supply voltage of 28V and a max output current of 1A. It is commonly used as a buffer or inverter based peripheral driver for various applications.

IRS2110SPBF

Infineon Technologies

IRS2110SPBF by Infineon Technologies is a 16-terminal peripheral driver with built-in transient and under voltage protections. It operates b/w -40 to 125 °C, with a supply voltage range of 10-20 V. Ideal for automotive applications due to its small outline package and CMOS technology.

ULN-2803LW

Sprague Electric

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR;

L9333MD-TR

STMicroelectronics

L9333MD-TR by STMicroelectronics is a 20-terminal peripheral driver with built-in protections for transient, over current, and thermal issues. It operates at supply voltages ranging from 4.5V to 32V and has a max output current of 0.015A. Ideal for applications requiring buffer or inverter based peripheral drivers in compact spaces.

TPS4H160AQPWPRQ1

Texas Instruments

TPS4H160AQPWPRQ1 by Texas Instruments is a Peripheral Driver with 4 functions, operating at -40 to 125 °C. It offers built-in protections for transient, over current, thermal, and under voltage issues. Ideal for automotive applications due to AEC-Q100 screening level and high side driver feature.

L6202

STMicroelectronics

STMicroelectronics L6202 is a full bridge peripheral driver with 18 terminals, operating voltage range of 12-48V. It features built-in thermal protection and supports up to 5A output current flow in source and sink direction. Ideal for applications requiring true output polarity control and standard input characteristics.