Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

DRV104PWP

Manufacturer

Texas Instruments
Manufacturer's Part Number

DRV104PWP
Description

PWM BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: HTSSOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

SMBJ18CA

Semtech

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358N

Taejin Technology

OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

KSZ9031RNXIC

Microchip Technology

KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.

Details

261

New England Microwave

Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;

Details

LM107H

General Electric Solid State

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;

Details

BSS138NH6327XTSA2

Infineon Technologies

BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.

Details

AT90CAN128-16AU

Microchip Technology

AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.

Details

BSS138K-13

Diodes Incorporated

BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.

Details

SS14

Jinan Jingheng Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138

Jiangsu Changjiang Electronics Technology

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;

Details

LM358N

Freescale Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

1N4148WS

Formosa Microsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M39029/58360

Souriau-sunbank Connection Technologies

Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.

Details

SS14

Vishay Intertechnology

Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.

Details

1N4148WS

Tak Cheong Electronics Holdings

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM555CM

National Semiconductor

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

LL4148

Itt Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

FDN306P

Onsemi

FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.

Details

USB2514BI-AEZG

Microchip Technology

USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.

Details

BSS138PS,115

Nexperia

N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;

Details

DRV104PWP Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	8 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	24 V
Maximum Time At Peak Reflow Temperature (s):	30
Maximum Seated Height:	1.2 mm
Maximum Output Current:	1.2 A
Sub-Category:	Peripheral Drivers
Surface Mount:	YES
Terminal Finish:	NICKEL PALLADIUM GOLD
No. of Terminals:	14
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH
Technology:	MOS
JESD-30 Code:	R-PDSO-G14
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Built-in Protections:	OVER CURRENT; THERMAL
Maximum Operating Temperature:	85 Cel
Package Code:	HTSSOP
Interface IC Type:	PWM BASED PERIPHERAL DRIVER
Width:	4.4 mm
Moisture Sensitivity Level (MSL):	2
Input Characteristics:	STANDARD
Driver No. of Bits:	1
Maximum Supply Voltage:	32 V
Nominal Output Peak Current Limit:	1.2 A
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Qualification:	Not Qualified
Package Equivalence Code:	TSSOP14,.25
Output Current Flow Direction:	SOURCE
Length:	5 mm
Peak Reflow Temperature (C):	260
Terminal Pitch:	.65 mm
Temperature Grade:	INDUSTRIAL
Power Supplies (V):	24

Category Top Products

IPS2050HQ

STMicroelectronics

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; JESD-609 Code: e4; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260; Terminal Finish: NICKEL PALLADIUM GOLD;

BTS441TGNTMA1

Infineon Technologies

BTS441TGNTMA1 by Infineon is a 4-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates at supply voltages ranging from 4.75V to 43V, with a nominal output peak current limit of 21A. This small outline package IC is ideal for applications requiring sink output current flow direction and turn-on/off times of 200us/250us.

AUIR3315STRL

Infineon Technologies

AUIR3315STRL by Infineon is a 5-terminal peripheral driver with built-in protections for automotive applications. It operates b/w -40 to 150 °C, with a supply voltage range of 6-32 V and max output current of 14 A. This small outline package features gull wing terminals and offers fast turn-on/off times suitable for buffer or inverter-based interfaces.

ITS711L1FUMA1

Infineon Technologies

ITS711L1FUMA1 by Infineon Technologies is a peripheral driver with built-in protections for over current, over voltage, thermal, and under voltage. It operates b/w -30 to 85 °C with a supply voltage range of 5-34 V. This small outline package IC is ideal for buffer or inverter based applications requiring source and sink output current flow control.

TBD62083AFNG(Z)

Toshiba

Toshiba TBD62083AFNG(Z) is an 8-bit BCDMOS peripheral driver with a max output current of 0.4A. It operates b/w -40 to 85°C, suitable for industrial applications. The driver features built-in transient protection and can sink current flow up to 25V, making it ideal for various electronic systems.

L293DD

STMicroelectronics

L293DD by STMicroelectronics is a peripheral driver with 2 functions, 20 terminals, and a max supply voltage of 36V. It features built-in thermal protection and offers true output polarity. Ideal for applications requiring source and sink current flow control in compact designs.

BSP742R

Siemens

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; No. of Functions: 1;

FSFR2100XSL

Onsemi

FSFR2100XSL by Onsemi is a half bridge based peripheral driver with 9 terminals in a rectangular package. It offers over current, over voltage, and thermal protections. Ideal for applications requiring source and sink output current flow direction control.

NUD3112LT1G

Onsemi

NUD3112LT1G by Onsemi is a CMOS technology-based peripheral driver with a max output current of 0.5A. It features built-in transient protection and operates in industrial temperature grade range (-40 to 85°C). This small outline, thin profile device is ideal for applications requiring sink output current flow direction.

ULN2003A

Allegro MicroSystems

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Minimum Operating Temperature: -20 Cel;

MIC5801YWM-TR

Microchip Technology

MIC5801YWM-TR by Microchip Technology is an 8-function peripheral driver with built-in transient protection. It operates in industrial temperature range (-40 to 85°C) and has a supply voltage of 5V. This small outline package (15.42mm x 7.52mm) features inverted output polarity, Gull Wing terminals, and sink current flow direction, making it ideal for various interface applications requiring buffer or inverter-based drivers.

BSP75NT

Infineon Technologies

BSP75NT by Infineon Technologies is a small outline peripheral driver with built-in protections for transient, over current, and over voltage. It operates at a nominal voltage of 12V and has a max output peak current limit of 0.7A. Ideal for applications requiring buffer or inverter based interface ICs in compact designs.

TPIC6B595DW

Texas Instruments

TPIC6B595DW by Texas Instruments is an 8-bit register-based peripheral driver with sink output current flow direction. It operates b/w -40 to 125 °C and has a max supply voltage of 5.5 V, making it suitable for automotive applications requiring transient protection and standard input characteristics.

VNQ5E250AJTR-E

STMicroelectronics

FULL BRIDGE BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;

BTT61002ERAXUMA1

Infineon Technologies

BTT61002ERAXUMA1 by Infineon Technologies is a peripheral driver with a max supply voltage of 36V. It has built-in protections for transient, over current, over voltage, thermal, and under voltage conditions. This small outline heat sink package is suitable for applications requiring buffer or inverter based interface ICs.

ISO8200BTR

STMicroelectronics

ISO8200BTR by STMicroelectronics is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w -40 to 125 °C and has a max supply voltage of 36 V. This automotive-grade IC features a turn-on time of 22 us and nominal output peak current limit of 1.1 A, making it ideal for buffer or inverter-based applications in the automotive industry.

FPF2123

Fairchild Semiconductor

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;

BTS141TCXT

Infineon Technologies

BTS141TCXT by Infineon Technologies is a peripheral driver with built-in protections for transient, over current, and over voltage. It has a nominal output peak current limit of 35A and turn-on time of 40us. This small outline package driver is ideal for applications requiring sink output current flow direction.

ISO1H812GAUMA1

Infineon Technologies

Infineon's ISO1H812GAUMA1 is a 36-terminal peripheral driver with 8-bit driver configuration and 0.625 A output current. It operates on power supplies of 3.3/5,15/30 V and has a max output peak current limit of 2.2 A. Ideal for applications requiring sink flow direction such as half bridge based interface ICs in small outline packages.

NCV8452STT1G

Onsemi

NCV8452STT1G by Onsemi is a peripheral driver with a max supply voltage of 34V and built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates at a nominal voltage of 13.5V and has a turn-on/off time of 120us. This small outline package is ideal for buffer or inverter-based applications requiring a peak output current limit of 3A.