Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

SN75451BDRE4

Manufacturer

Texas Instruments
Manufacturer's Part Number

SN75451BDRE4
Description

AND GATE BASED PERIPHERAL DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

LM358MX

Texas Instruments

LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.

Details

1N4148

Itt Components

RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;

Details

1N4148WS

Meritek Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138

Panjit International

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;

Details

1N4148WS

General Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Sangdest Microelectronics (Nanjing)

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Semtech

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SS14

Surge Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Renesas Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N2222A

New England Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

2N2222A

Diotec Semiconductor Ag

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;

Details

LM317T

Linear Technology

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;

Details

1N4148

Baneasa S A

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BAV99

Lite-on Technology

RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;

Details

MMBT2907ALT1G

Onsemi

MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.

Details

2N2222A

Micropac Industries

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

1N4148

ROHM

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148WT

Diodes Incorporated

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Aeroflex/metelics

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;

Details

1N4148WS

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SN75451BDRE4 Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	4.75 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	5 V
Output Characteristics:	OPEN-COLLECTOR
Maximum Time At Peak Reflow Temperature (s):	NOT SPECIFIED
Maximum Seated Height:	1.75 mm
Maximum Output Current:	.5 A
Sub-Category:	Peripheral Drivers
Surface Mount:	YES
Maximum Supply Current:	65 mA
Terminal Finish:	Nickel/Palladium/Gold (Ni/Pd/Au)
No. of Terminals:	8
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
Technology:	BIPOLAR
JESD-30 Code:	R-PDSO-G8
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Maximum Operating Temperature:	70 Cel
Package Code:	SOP
Interface IC Type:	AND GATE BASED PERIPHERAL DRIVER
Width:	3.9 mm
Turn-off Time:	.025 us
Moisture Sensitivity Level (MSL):	1
Output Polarity:	TRUE
Input Characteristics:	STANDARD
Driver No. of Bits:	2
Maximum Supply Voltage:	5.25 V
Turn-on Time:	.025 us
Nominal Output Peak Current Limit:	.5 A
JESD-609 Code:	e4
Minimum Operating Temperature:	0 Cel
No. of Functions:	2
Qualification:	Not Qualified
Package Equivalence Code:	SOP8,.25
Output Current Flow Direction:	SINK
Length:	4.9 mm
Peak Reflow Temperature (C):	260
Terminal Pitch:	1.27 mm
Temperature Grade:	COMMERCIAL
Power Supplies (V):	5

Category Top Products

MIC94090YC6-TR

Micrel

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;

NCV8402ASTT3G

Onsemi

NCV8402ASTT3G by Onsemi is a peripheral driver with built-in protections for transient, over current, over voltage, and thermal conditions. It has a max output peak current limit of 4.8A and a turn-on time of 25us. This IC is commonly used as a buffer or inverter based peripheral driver in various applications.

VN5050AJTR-E

STMicroelectronics

VN5050AJTR-E by STMicroelectronics is a peripheral driver with a max supply voltage of 36V and built-in protections for various faults. It features a small outline package style, dual terminal position, and CMOS technology. Ideal for applications requiring source output current flow direction and interface IC type as buffer or inverter based peripheral driver.

IPS511GTR

Infineon Technologies

Infineon Technologies' IPS511GTR is a small outline peripheral driver with 8 terminals. It offers built-in protections for over current, over voltage, thermal, and under voltage. With a max supply voltage of 35V and nominal output peak current limit of 5A, it's ideal for applications requiring source flow direction like buffer or inverter-based interface ICs.

BTS500851TMAATMA1

Infineon Technologies

BTS500851TMAATMA1 by Infineon Technologies is a MOS technology peripheral driver with built-in protections for transient, over current, and over voltage. It has a max supply voltage of 58V and nominal output peak current limit of 11.1A. This small outline heat sink package is ideal for applications requiring a buffer or inverter based peripheral driver with sink output flow direction.

SN75451BP

Texas Instruments

SN75451BP by Texas Instruments is a peripheral driver with 2 functions, operating at 5V. It has open-collector output polarity and can handle up to 0.5A of current flow. Ideal for applications requiring AND gate based peripheral drivers in commercial temperature environments.

L6201

STMicroelectronics

STMicroelectronics L6201 is a full bridge peripheral driver with 20 terminals. It operates at supply voltages b/w 12V to 48V, offering built-in transient and thermal protections. With a max output peak current of 5A, it is ideal for driving various loads in applications requiring true output polarity control.

EL7156CSZ-T7

Renesas Electronics

EL7156CSZ-T7 by Renesas Electronics is a full bridge peripheral driver with 3.5A output current limit, suitable for industrial applications. It operates b/w -40 to 85°C, with a supply voltage range of 4.5-16.5V. This small outline package has dual terminals and matte tin finish, making it ideal for surface mount designs.

VN820PT-E

STMicroelectronics

VN820PT-E by STMicroelectronics is a MOS technology-based peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates within a power supply range of 8-36V and can handle a max output current of 9A. This small outline package driver is ideal for applications requiring source flow direction in automotive and industrial settings.

BTS442E2E3062ABUMA1

Infineon Technologies

BTS442E2E3062ABUMA1 by Infineon: MOS tech, 42V max supply, 70A peak current. App: buffer/inverter-based peripheral driver for transient/overcurrent protection in compact designs.

ISO1H811GAUMA1

Infineon Technologies

ISO1H811GAUMA1 by Infineon Technologies is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates at a max supply voltage of 5.5V and has a max output current of 0.625A. This interface IC type is ideal for applications requiring buffer or inverter based peripheral drivers in compact designs.

AUIPS7091GTR

Infineon Technologies

AUIPS7091GTR by Infineon: Peripheral driver with 1.5A output current, 35us turn-on time, and 45us turn-off time. Ideal for automotive applications requiring transient, overcurrent, and thermal protection in a compact small outline package. Supply voltage range from 6V to 35V makes it versatile for various automotive systems.

FPF2125

Fairchild Semiconductor

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;

ULN2004ANSRG4

Texas Instruments

ULN2004ANSRG4 by Texas Instruments is a 7-bit buffer/inverter-based peripheral driver with open-collector output. It operates b/w -20°C to 70°C, has a max supply voltage of 8V, and built-in transient protection. Ideal for applications requiring sink current flow direction in compact designs due to its small outline package style.

BSP452

Infineon Technologies

BSP452 by Infineon is a MOS technology-based peripheral driver with 4 terminals and built-in protections for over/under voltage. It operates at supply voltages ranging from 5V to 34V, making it suitable for automotive applications requiring a nominal output peak current limit of 0.7A. The small outline package style with gull wing terminal form enables surface mount installation in compact spaces.

VN751PT

STMicroelectronics

VN751PT by STMicroelectronics is a Peripheral Driver with 5 terminals, operating voltage range of 5.5V to 36V, and built-in transient protection. It has a small outline package style suitable for automotive applications, with a max temperature of 125°C. The device offers a nominal output peak current limit of 2.5A and operates as a buffer or inverter-based peripheral driver with source flow direction.

MIC5841YWM-TR

Microchip Technology

MIC5841YWM-TR by Microchip Technology is an 8-bit SIPO peripheral driver with inverted output polarity. It operates at temperatures ranging from -40 to 85°C and has a max supply current of 16mA. This small outline package with gull wing terminals is ideal for industrial applications requiring standard input characteristics and transient protection.

BTS3110NHUMA1

Infineon Technologies

BTS3110NHUMA1 by Infineon Technologies is a peripheral driver with built-in protections for over current, over voltage, and thermal issues. It features a small outline, low profile package style with 4 terminals in a gull wing form. This interface IC type has a nominal output peak current limit of 7.5A and is suitable for applications requiring sink output current flow direction.

ITS4140NXT

Infineon Technologies

ITS4140NXT by Infineon Technologies is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w -30 to 85°C with a supply voltage range of 4.9-60V. This small outline package IC is ideal for applications requiring sink output current flow direction and a nominal peak current limit of 0.2A.

TPS4H000AQPWPRQ1

Texas Instruments

TPS4H000AQPWPRQ1 by Texas Instruments is a Peripheral Driver with 4 functions, operating at -40 to 125 °C. It has built-in protections for transient, over current, thermal & under voltage. Ideal for automotive applications due to AEC-Q100 screening & high side driver feature.