Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

VNN1NV04PTR-E

Manufacturer

STMicroelectronics
Manufacturer's Part Number

VNN1NV04PTR-E
Description

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Code: SOP; Package Shape: RECTANGULAR; Nominal Supply Voltage: 5 V;
Datasheet

Datasheet

Not In Stock

Popular Products

1N4148

Weitron Technology

RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);

Details

LM358D-T

NXP Semiconductors

LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.

Details

LM358MX

Onsemi

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

BSS138-7-F

SPC TECHNOLOGY/ MULTICOMP

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;

Details

2N7002DWH6327XTSA1

Infineon Technologies

2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.

Details

SMBJ18CA

Sangdest Microelectronics (Nanjing)

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Toshiba

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148

Itt Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BAV99

STMicroelectronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

KSZ9031RNXIA

Microchip Technology

KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.

Details

0460-202-16141

TE Connectivity

TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.

Details

LM7805CT/NOPB

National Semiconductor

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;

Details

2N7002

Zetex Plc

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;

Details

BSS138

Panjit International

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;

Details

C1210C104K5RACTU

KEMET Corporation

KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.

Details

MC33269T-3.3G

Onsemi

MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.

Details

M39029/56-351

Carlisle Interconnect Technologies

CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;

Details

LM107H/883C

General Electric Solid State

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;

Details

BSS138PS,115

NXP Semiconductors

NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.

Details

LL4148

Taitron Components

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

VNN1NV04PTR-E Technical Details

TYPE	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	5 V
Maximum Time At Peak Reflow Temperature (s):	30
Maximum Seated Height:	1.8 mm
Surface Mount:	YES
Terminal Finish:	Matte Tin (Sn) - annealed
No. of Terminals:	4
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
JESD-30 Code:	R-PDSO-G4
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Built-in Protections:	TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL
Package Code:	SOP
Interface IC Type:	BUFFER OR INVERTER BASED PERIPHERAL DRIVER
Width:	3.5 mm
Turn-off Time:	5.5 us
Moisture Sensitivity Level (MSL):	1
Turn-on Time:	1 us
Nominal Output Peak Current Limit:	1.7 A
JESD-609 Code:	e3
No. of Functions:	1
Qualification:	Not Qualified
Output Current Flow Direction:	SINK
Length:	6.5 mm
Peak Reflow Temperature (C):	260
Terminal Pitch:	2.3 mm

Category Top Products

AUIPS7091GTR

International Rectifier

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Output Current: 1.5 A;

FPF2110

Fairchild Semiconductor

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;

SI1040X-T1-GE3

Vishay Intertechnology

SI1040X-T1-GE3 by Vishay Intertechnology is a Peripheral Driver with 6 terminals, 8A output current, and built-in transient protection. It operates at supply voltages ranging from 1.8V to 8V and is ideal for buffer or inverter-based interface IC applications requiring source and sink current flow control.

MIC5801YWM

Microchip Technology

MIC5801YWM by Microchip Technology is an 8-function peripheral driver with a max supply current of 2mA. It operates in industrial temperature range (-40 to 85°C) and has a nominal voltage of 5V. This small outline package IC is ideal for applications requiring inverted output polarity and sink current flow direction.

IRS2110SPBF

International Rectifier

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

VN751PT13TR

STMicroelectronics

VN751PT13TR by STMicroelectronics is a peripheral driver with a max supply voltage of 36V and built-in transient protections. It operates in automotive applications, offering a nominal output peak current limit of 2.5A. With a small outline package style and gull wing terminal form, it is suitable for surface mount installations in various electronic systems.

MIC5801YWM

Rochester Electronics

LATCH BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR;

VNQ7140AJTR

STMicroelectronics

VNQ7140AJTR by STMicroelectronics is a 16-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w -40 to 125 °C with a supply voltage range of 4-28 V. Ideal for automotive applications due to its small outline package style and sink output current flow direction.

IRS21867STRPBF

International Rectifier

HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

VN340SPTR-33-E

STMicroelectronics

STMicroelectronics VN340SPTR-33-E is a 4-function peripheral driver with max supply voltage of 36V and output current of 1A. It features built-in protections for transient, thermal, and under voltage. Ideal for applications requiring buffer or inverter based interface ICs with sink output current flow direction.

ULN-2003A

Sprague Electric

ULN-2003A by Sprague Electric is a 7-bit bipolar peripheral driver with a max output current of 0.35 A and nominal voltage of 50 V. It features a rectangular plastic/epoxy package, dual terminal position, and operates in temperatures ranging from 0 to 70°C. Ideal for driving various loads in commercial applications.

SI9986DY-T1-E3

Vishay Intertechnology

Vishay Intertechnology's SI9986DY-T1-E3 is a half bridge based peripheral driver with a supply voltage range of 3.8V to 13.2V and operating temperature from -40°C to 85°C. It features source and sink output current flow direction, making it ideal for industrial applications requiring precise control in compact spaces.

ULN2004AD16-U

Diodes Incorporated

ULN2004AD16-U by Diodes Inc. is a peripheral driver with 7 bits, open-collector output characteristics, and a max supply voltage of 13V. It is commonly used as a buffer or inverter based peripheral driver in various applications.

VNQ500PEPTR-E

STMicroelectronics

STMicroelectronics' VNQ500PEPTR-E is a 4-function peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates within a supply voltage range of 5.5V to 36V and has a compact package style suitable for various applications requiring source output current flow direction.

BTS117BKSA1

Infineon Technologies

BTS117BKSA1 by Infineon Technologies is a MOS technology peripheral driver with built-in protections for transient, over current, and over voltage. It has 3 terminals, a nominal output peak current limit of 25A, and turn-on time of 70 us. This rectangular package style flange mount device is ideal for applications requiring sink output current flow direction.

ULN2003D

Philips Semiconductors

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

TPS4H160BQPWPRQ1

Texas Instruments

TPS4H160BQPWPRQ1 by Texas Instruments is a Peripheral Driver with 4 functions, operating at -40 to 125 °C. It features built-in protections for transient, over current, thermal, and under voltage scenarios. Ideal for automotive applications due to its AEC-Q100 screening level and high side driver capability.

VN7140ASTR-E

STMicroelectronics

STMicroelectronics' VN7140ASTR-E is a peripheral driver with 8 terminals, offering built-in protections against various faults. It operates at supply voltages ranging from 4V to 28V and has a turn-on time of 120 us. Ideal for applications requiring sink output current flow direction and buffer or inverter based interface IC type.

L293NE

Texas Instruments

L293NE by Texas Instruments is a peripheral driver with 2 functions, operating at 4.5-36V. It offers built-in transient and thermal protections, with a max output current of 2A. Ideal for applications requiring true output polarity control in commercial temperature environments.

FDC6323L

Fairchild Semiconductor

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; No. of Functions: 1;