MC33879APEK-R2 by Freescale Semiconductor

Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

MC33879APEK-R2

Manufacturer

Freescale Semiconductor
Manufacturer's Part Number

MC33879APEK-R2
Description

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: HSSOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

ULN2803A

Allegro MicroSystems

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;

Details

BAV99WT1G

Onsemi

BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.

Details

SS14

General Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Vishay Telefunken

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SS14

Sensitron Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Cheng-yi Electronic

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

OPA2227UA

Texas Instruments

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

Details

1N4148

Itt Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

E8WSDC12-32.768KTR

Abracon

Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.

Details

CRG0805F10R

Tyco Electronics Components

FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;

Details

LL4148

Vishay Telefunken

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

AH180-WG-7

Diodes Incorporated

AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.

Details

1N4148

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BSS138

Vishay Intertechnology

Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.

Details

2N2222A

Aeroflex/metelics

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;

Details

1N4148

Digitron Semiconductors

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N7002

Philips Semiconductors

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;

Details

SS14

Vishay Intertechnology

Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.

Details

CDSOT23-SM712

Bourns

Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.

Details

RK73H2ATTD10R0F

Koa Speer Electronics

RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.

Details

MC33879APEK-R2 Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	3.1 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	5 V
Output Characteristics:	OPEN-DRAIN
Maximum Time At Peak Reflow Temperature (s):	40
Maximum Seated Height:	2.65 mm
Sub-Category:	Peripheral Drivers
Surface Mount:	YES
Maximum Supply Current:	.7 mA
Terminal Finish:	MATTE TIN
No. of Terminals:	32
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE, HEAT SINK/SLUG, SHRINK PITCH
Technology:	MOS
JESD-30 Code:	R-PDSO-G32
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Built-in Protections:	TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE
Maximum Operating Temperature:	125 Cel
Package Code:	HSSOP
Interface IC Type:	BUFFER OR INVERTER BASED PERIPHERAL DRIVER
Width:	7.5 mm
Turn-off Time:	100 us
Moisture Sensitivity Level (MSL):	3
Output Polarity:	TRUE
Input Characteristics:	STANDARD
Driver No. of Bits:	8
Maximum Supply Voltage:	5.5 V
Turn-on Time:	50 us
Nominal Output Peak Current Limit:	1.2 A
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Qualification:	Not Qualified
Package Equivalence Code:	SSOP32,.4
Output Current Flow Direction:	SINK
Length:	11 mm
Peak Reflow Temperature (C):	260
Terminal Pitch:	.65 mm
Temperature Grade:	AUTOMOTIVE
Power Supplies (V):	3.3/5

Category Top Products

VN7004CHTR

STMicroelectronics

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;

BSP742R

Siemens

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; No. of Functions: 1;

SN6507DGQR

Texas Instruments

SN6507DGQR by Texas Instruments is a peripheral driver with a max supply voltage of 36V and nominal output peak current limit of 1.3A. It operates b/w -55 to 125°C, making it suitable for various industrial applications requiring buffer or inverter-based interface ICs in compact designs.

BTM7810KAUMA1

Infineon Technologies

Infineon's BTM7810KAUMA1 is a half bridge peripheral driver with 2 functions, operating at 1.8-42V. It offers over/under voltage protection and thermal safeguards in a small outline package. Ideal for applications requiring source/sink current flow control with fast turn-on/off times.

ISP762TXT

Infineon Technologies

ISP762TXT by Infineon Technologies is a peripheral driver with 8 terminals, built-in transient protection, and a max supply voltage of 34V. It is used in applications requiring a small outline package style, such as buffer or inverter-based interface ICs for sink output current flow direction. Operating temperature ranges from -30 to 85°C.

TPS22810DRVT

Texas Instruments

TPS22810DRVT by Texas Instruments is a peripheral driver with a max supply voltage of 18V and built-in protections for transient, thermal, and under voltage. It has 6 terminals in a small outline package style suitable for industrial applications. The device can handle an output current of up to 2A in sink direction.

BTS70081EPPXUMA1

Infineon Technologies

BTS70081EPPXUMA1 by Infineon is a peripheral driver with 14 terminals, built-in protections for transient, over current, and over voltage. It operates at supply voltages b/w 6-18V and has a nominal output peak current limit of 11A. Ideal for automotive applications due to AEC-Q100 screening level compliance.

IRS2011STRPBF

Infineon Technologies

IRS2011STRPBF by Infineon is a Peripheral Driver with 8 terminals, operating voltage range of 10-20V. It offers built-in transient and under voltage protections, suitable for automotive applications. This CMOS technology-based driver has a turn-on/off time of 0.08us and can sink output current.

TPS4H160BQPWPRQ1

Texas Instruments

TPS4H160BQPWPRQ1 by Texas Instruments is a Peripheral Driver with 4 functions, operating at -40 to 125 °C. It features built-in protections for transient, over current, thermal, and under voltage scenarios. Ideal for automotive applications due to its AEC-Q100 screening level and high side driver capability.

TPS22916BYFPT

Texas Instruments

TPS22916BYFPT by Texas Instruments is a peripheral driver with max supply voltage of 5.5V, min supply voltage of 1V, and industrial temp grade. It features built-in transient protections and is ideal for buffer or inverter based applications requiring source output current flow direction.

ULN2003APWRE4

Texas Instruments

ULN2003APWRE4 by Texas Instruments is a 7-bit buffer/inverter peripheral driver with 16 terminals. It features open-collector output, transient protection, and sink current flow direction. This bipolar technology IC is ideal for applications requiring inverted output polarity in a small outline package.

NCP45520IMNTWG-H

Onsemi

NCP45520IMNTWG-H by Onsemi is a peripheral driver with 8 terminals, operating voltage range of 0.5V to 13.5V, and built-in protections for transient, over current, thermal, and under voltage. It has a small outline package style suitable for industrial applications requiring sink output current flow direction at temperatures ranging from -40°C to 85°C.

TPIC6B595DWG4

Texas Instruments

TPIC6B595DWG4 by Texas Instruments is a register-based peripheral driver with 8 bits. It has a max supply voltage of 5.5V and can handle a max output current of 0.15A. Ideal for automotive applications due to its built-in transient protections and small outline package style.

E-L6202

STMicroelectronics

STMicroelectronics E-L6202 is a full bridge peripheral driver with 18 terminals. It operates at a nominal voltage of 36V and supports a max supply voltage of 48V. The device features built-in thermal protection and is commonly used in applications requiring source and sink output current flow control.

TPS22810DRVR

Texas Instruments

TPS22810DRVR by Texas Instruments is a 6-terminal peripheral driver with max supply voltage of 18V. It offers built-in protections for transient, thermal, and under voltage conditions. Ideal for industrial applications requiring a compact (0.8mm seated height) and high output current (2A) solution.

NCP51810AMNTWG

Onsemi

HALF BRIDGE BASED PERIPHERAL DRIVER; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1; Terminal Finish: NICKEL PALLADIUM GOLD; Peak Reflow Temperature (C): 260; JESD-609 Code: e4;

FPF2116

Fairchild Semiconductor

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;

BTS50452EKAXUMA1

Infineon Technologies

BTS50452EKAXUMA1 by Infineon is a 14-terminal peripheral driver with built-in protections for transient, over current, thermal, and under voltage. It operates at a nominal voltage of 13.5V and has a max supply voltage of 28V. With turn-on/off time of 230us, it is ideal for applications requiring buffer or inverter based peripheral drivers.

ULN2003A

Sgs-ates Componenti Electronici S P A

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; JESD-609 Code: e0;

DS2482X-101+T

Maxim Integrated

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 9; Package Code: VFBGA; Package Shape: RECTANGULAR;