Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

UDN2987LW

Manufacturer

Allegro MicroSystems
Manufacturer's Part Number

UDN2987LW
Description

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

LL4148

Yangzhou Yangjie Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LM317T

Tt Electronics Plc

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;

Details

MBR0520LT1G

Onsemi

MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.

Details

C0603C104K5RACAUTO

KEMET Corporation

KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.

Details

2N2222A

Loras Industries

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

BSS138

Good-ark Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;

Details

SMBJ18CA

Weitron Technology

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM317BD2TG

Onsemi

LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.

Details

ULN2803A

Sanken Electric

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;

Details

2N7002

Diodes Incorporated

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;

Details

1N4148WS

Changzhou Galaxy Century Microelectronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

IRLML6402TRPBF

Infineon Technologies

IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.

Details

2N7002

Jiangsu Changjiang Electronics Technology

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;

Details

M39029/58360

Souriau

CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;

Details

SS14+

Multicomp Pro

SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.

Details

EPCS4SI8N

Altera

CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;

Details

2N2222A

Texas Instruments

2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).

Details

OHN3020U

Tt Electronics Plc

OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.

Details

1552200253

Molex

WIRE AND CABLE;

Details

LM555CM

Fairchild Semiconductor

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

UDN2987LW Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	7 V
Package Body Material:	PLASTIC/EPOXY
Maximum Time At Peak Reflow Temperature (s):	30
Maximum Seated Height:	2.65 mm
Maximum Output Current:	.35 A
Sub-Category:	Peripheral Drivers
Surface Mount:	YES
Terminal Finish:	Tin/Lead (Sn/Pb)
No. of Terminals:	20
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
Technology:	BIPOLAR
JESD-30 Code:	R-PDSO-G20
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Built-in Protections:	TRANSIENT; OVER CURRENT; THERMAL
Maximum Operating Temperature:	85 Cel
Package Code:	SOP
Interface IC Type:	BUFFER OR INVERTER BASED PERIPHERAL DRIVER
Width:	7.5 mm
Turn-off Time:	4 us
Driver No. of Bits:	8
Maximum Supply Voltage:	35 V
Turn-on Time:	.6 us
Nominal Output Peak Current Limit:	.5 A
JESD-609 Code:	e0
Minimum Operating Temperature:	-20 Cel
No. of Functions:	8
Qualification:	Not Qualified
Package Equivalence Code:	SOP20,.4
Output Current Flow Direction:	SOURCE
Length:	12.8 mm
Peak Reflow Temperature (C):	240
Terminal Pitch:	1.27 mm
Temperature Grade:	OTHER

Category Top Products

IRS2304SPBF

Infineon Technologies

IRS2304SPBF by Infineon Technologies is a peripheral driver with a max supply voltage of 20V. It is a CMOS technology-based interface IC type, suitable for automotive applications. This small outline, shrink pitch package has built-in protections against transient and under voltage conditions.

VNN3NV04PTR-E

STMicroelectronics

VNN3NV04PTR-E by STMicroelectronics is a 4-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates at a nominal voltage of 5V with a peak output current limit of 5A. This small outline package driver has a turn-on time of 1.35us and turn-off time of 10us, making it ideal for buffer or inverter based interface IC applications.

BTS432E2E3043

Siemens

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 5; Package Shape: RECTANGULAR; Nominal Output Peak Current Limit: 44 A; Turn-off Time: 80 us;

DRV8846RGET

Texas Instruments

Texas Instruments DRV8846RGET is a 24-terminal peripheral driver with built-in protections for transient, over current, thermal, and under voltage. It operates in industrial temperature range (-40 to 85°C) with a max output current of 2A. Ideal for applications requiring source and sink output current flow direction in a compact chip carrier package.

FAN7390M1

Fairchild Semiconductor

FAN7390M1 by Fairchild Semiconductor is a half bridge based peripheral driver with built-in transient and under voltage protections. It operates b/w -40 to 125 °C, with a supply voltage range of 10-20 V. This small outline package is ideal for automotive applications requiring fast turn-on/off times and source/sink current flow.

TPS22916CNYFPR

Texas Instruments

TPS22916CNYFPR by Texas Instruments is a peripheral driver with max supply voltage of 5.5V, min supply voltage of 1V, and industrial temp grade. It has built-in transient protections and is ideal for buffer or inverter based applications requiring source current flow direction.

VND5050K-E

STMicroelectronics

VND5050K-E by STMicroelectronics is a 24-terminal peripheral driver with built-in protections for transient, over current, thermal, and under voltage. It operates on power supplies ranging from 8V to 36V and has a max supply voltage of 36V. This rectangular package with gull wing terminals is ideal for buffer or inverter-based interface IC applications.

ST890CDR

STMicroelectronics

ST890CDR by STMicroelectronics is a peripheral driver with 8 terminals, operating voltage range of 2.7-5.5V, and max output current of 1.2A. It features built-in protections against overcurrent and thermal issues, suitable for industrial applications requiring buffer or inverter-based interface ICs with fast turn-on/off times.

FPF2108

Onsemi

FPF2108 by Onsemi is a MOS technology-based peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates b/w -40 to 85 °C with a supply voltage range of 1.8-5.5 V and max output current of 0.8 A. Ideal for industrial applications requiring a compact form factor and source flow direction.

UCC23513DWY

Texas Instruments

UCC23513DWY by Texas Instruments is a small outline peripheral driver with built-in transient and under voltage protections. It operates in industrial temperature range (-40 to 115°C) and can handle up to 33V supply voltage, providing a max output current of 4.5A. Ideal for applications requiring source and sink current flow direction control, such as buffer or inverter-based systems.

BTN8962TA

Infineon Technologies

BTN8962TA by Infineon Technologies is a 7-terminal MOS peripheral driver with built-in protections for transient, over/under voltage & current. It operates at 8-18V, AEC-Q100 screened, ideal for automotive applications requiring true output polarity and Schmitt trigger input characteristics.

FPF2701MPX

Fairchild Semiconductor

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;

ULN2004AS16-13

Diodes Incorporated

Diodes Inc. ULN2004AS16-13 is a 7-bit buffer/inverter peripheral driver with open-collector output, designed for sink current flow direction. It operates b/w -40 to 105°C, with a max supply voltage of 13V and a turn-on/off time of 10µs. Ideal for applications requiring transient protection in compact designs.

VND7NV04TR-E

STMicroelectronics

VND7NV04TR-E by STMicroelectronics is a Peripheral Driver with built-in protections for transient, over current, over voltage, and thermal issues. It has a max output peak current limit of 9A and turn-on time of 2.3µs. Ideal for applications requiring buffer or inverter based peripheral drivers in compact spaces.

TBD62083APG

Toshiba

Toshiba TBD62083APG is an 8-bit BUFFER/INVERTER BASED PERIPHERAL DRIVER with a max output current of 0.4A. It operates in industrial temperature range (-40 to 85°C) and supports a supply voltage range from 2.5V to 25V. Ideal for applications requiring high-current sinking capabilities in various electronic systems.

BSP752R

Infineon Technologies

BSP752R by Infineon Technologies is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates at supply voltages ranging from 6V to 52V and has a max output current of 1.3A. This MOS technology-based device is ideal for applications requiring buffer or inverter based peripheral drivers in automotive systems.

IRS2011STRPBF

International Rectifier

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

L6203

STMicroelectronics

STMicroelectronics L6203 is a full bridge peripheral driver with 48V max supply voltage, built-in transient and thermal protections. Ideal for applications requiring source and sink output current flow direction, it features 11 terminals in a rectangular package style with through-hole terminal form.

BSP762T

Siemens

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Output Current Flow Direction: SOURCE;

IRS21844MTRPBF

International Rectifier

HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 14; Package Code: HQCCN; Package Shape: SQUARE;