Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

LAN8720A-CP-TR

Manufacturer

Microchip Technology
Manufacturer's Part Number

LAN8720A-CP-TR
Description

ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL EXTENDED; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
Datasheet

Datasheet

Not In Stock

Popular Products

LM317T/NOPB

National Semiconductor

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;

Details

2N7002,215

NXP Semiconductors

2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.

Details

SMBJ18CA

Good-ark Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;

Details

BAV99LT1G

Onsemi

BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.

Details

1N4148

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

STM32H743BIT6

STMicroelectronics

STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.

Details

2N2222A

Silicon Transistor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

1N4148WS

Synsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002,215

Nexperia

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;

Details

LL4148

Itt Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

2N2222A

Digitron Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

LM555CM

Renesas Electronics

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

LM317D2TG

Onsemi

LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.

Details

DS18B20Z+T&R

Analog Devices

DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.

Details

SS14

Onsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WT

Taitron Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ST3485EBDR

STMicroelectronics

ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.

Details

2N2222A

Hi-tron Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

1N4148

North American Philips Discrete Products Div

RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);

Details

MBRS360T3G

Onsemi

MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.

Details

LAN8720A-CP-TR Technical Details

TYPE	DESCRIPTION
Package Body Material:	UNSPECIFIED
Nominal Supply Voltage:	3.3 V
Maximum Seated Height:	1 mm
Surface Mount:	YES
Maximum Supply Current:	54 mA
Terminal Finish:	MATTE TIN
No. of Terminals:	24
No. of Transceivers:	1
Terminal Position:	QUAD
Package Style (Meter):	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
Data Rate:	100 Mbps
Screening Level:	TS 16949
JESD-30 Code:	S-XQCC-N24
Package Shape:	SQUARE
Terminal Form:	NO LEAD
Maximum Operating Temperature:	85 Cel
Package Code:	HVQCCN
Width:	4 mm
Telecom IC Type:	ETHERNET TRANSCEIVER
JESD-609 Code:	e3
Minimum Operating Temperature:	0 Cel
No. of Functions:	1
Qualification:	Not Qualified
Package Equivalence Code:	LCC24,.16SQ,20
Length:	4 mm
Terminal Pitch:	.5 mm
Temperature Grade:	COMMERCIAL EXTENDED

Category Top Products

UJA1169ATK/X/FZ

NXP Semiconductors

UJA1169ATK/X/FZ by NXP Semiconductors is a CAN FD transceiver with 20 terminals, suitable for automotive applications. It operates at a nominal voltage of 13V and supports data rates up to 15 Mbps. This small outline package has a terminal pitch of 0.5mm and can handle a max supply current of 67mA.

PTCAN4550RGYQ1

Texas Instruments

Texas Instruments PTCAN4550RGYQ1 is a 20-terminal chip carrier with AEC-Q100 screening for automotive applications. It operates at -40 to 125 °C, supporting data rates up to 5 Mbps. This interface circuit features a rectangular package shape and is suitable for network interfaces in automotive electronics.

SN65HVD231DRG4

Texas Instruments

SN65HVD231DRG4 by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, operating at 3.3V. It features a small outline package style, dual terminals, and industrial temperature grade suitability. Ideal for network interfaces in applications requiring reliable communication over short distances.

TJA1042T/3/1J

NXP Semiconductors

NXP Semiconductors' TJA1042T/3/1J is an automotive-grade network interface IC with 8 terminals, operating from -40 to 125°C. It features a small outline package, Gull Wing terminals, and supports a 5V supply voltage. Ideal for interface circuits in automotive applications due to its robust design and high-temperature tolerance.

KSZ8081RNACA-TR

Microchip Technology

Microchip's KSZ8081RNACA-TR is a 24-terminal Ethernet transceiver with 100 Mbps data rate, operating at 0-70°C. It features a square chip carrier package style, matte tin finish, and 3.3V supply voltage. Ideal for network interfaces in commercial applications requiring a compact design and high-speed connectivity.

LAN8742-CZ

Standard Microsystems

ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;

MCP2561FDT-E/MF

Microchip Technology

MCP2561FDT-E/MF by Microchip: CAN FD transceiver, 8 Mbps data rate, 5V supply voltage. Ideal for automotive applications due to TS16949 screening and -40 to 125°C operating temperature range.

AT86RF212B-ZUR

Atmel

SUPPORT CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;

KSZ8895MQXCA

Microchip Technology

KSZ8895MQXCA by Microchip Tech: Ethernet switch IC with 5 transceivers, 100 Mbps data rate. Operating temp range of 0-70°C. Ideal for network interfaces in commercial-grade applications.

TLE6250GV33XUMA1

Infineon Technologies

TLE6250GV33XUMA1 by Infineon Technologies is a CAN transceiver with 3.3V supply voltage, BICMOS technology, and 8 terminals in a small outline package. It is used for network interfaces in automotive applications due to its surface mount capability and gull wing terminal form.

XISO1044BDR

Texas Instruments

XISO1044BDR by Texas Instruments is a small outline network interface IC with 8 terminals. It operates in automotive-grade temperature range (-40 to 125°C) at 1.8V supply voltage, drawing max 70mA current. Ideal for telecom applications requiring interface circuits in compact designs.

TJA1042T,118

NXP Semiconductors

NXP Semiconductors' TJA1042T,118 is a network interface with 8 terminals and 5V supply voltage. Operating b/w -40 to 125°C, it supports data rates up to 1 Mbps. Ideal for automotive applications, this IC features a small outline package and dual terminal position.

TCAN1042HVDRBTQ1

Texas Instruments

TCAN1042HVDRBTQ1 by Texas Instruments is an Ethernet transceiver with a data rate of 2 Mbps. It operates b/w -55 to 125 °C, suitable for military applications. With a supply voltage of 5 V and max current of 110 mA, it's ideal for automotive network interfaces.

DP83822IFRHBT

Texas Instruments

Texas Instruments DP83822IFRHBT is a Network Interface with 4 transceivers for Ethernet. It operates at data rate of 100000 Mbps, with supply voltage of 1.8V. Suitable for industrial applications, it has temperature range from -40 to 85°C and MSL level of 2.

ISO1042QDWVRQ1

Texas Instruments

ISO1042QDWVRQ1 by Texas Instruments is an AEC-Q100 compliant network interface IC with 8 terminals in a small outline package. It operates b/w -40 to 125°C, suitable for automotive applications. Featuring nickel palladium gold finish, it has a terminal pitch of 1.27mm and nominal voltage of 1.8V.

CMWX1ZZABZ-091

Murata Manufacturing

Murata's CMWX1ZZABZ-091 is a metal-bodied network interface with surface mount capability. Operating from -40 to 85°C, it supports circuits at 3.3V with a max supply current of 3.6mA. Ideal for industrial applications requiring reliable telecom ICs in microelectronic assemblies.

SN65HVD231QDRG4

Texas Instruments

SN65HVD231QDRG4 by Texas Instruments is a BICMOS interface circuit with 1 Mbps data rate, suitable for automotive applications. It operates at 3.3V and has a max supply current of 0.017 mA, making it ideal for network interfaces in harsh environments. This small outline package with gull wing terminals can withstand temperatures from -40 to 125°C.

AR8033-AL1A-R

Qualcomm Atheros

ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;

TCAN1051HVDR

Texas Instruments

TCAN1051HVDR by Texas Instruments is a Network Interface with 8 terminals, operating from -55 to 125°C. It has a data rate of 2 Mbps and supports a supply voltage of 5V. Ideal for military-grade telecom applications due to its small outline package and dual terminal position.

NCN5121MNTWG

Onsemi

The Onsemi NCN5121MNTWG is a Network Interface IC with 40 terminals in a square chip carrier package. It operates b/w -40 to 105°C, suitable for industrial applications. With a nominal voltage of 3.3V and terminal pitch of 0.5mm, it is ideal for telecom interface circuits.