Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

All prices are in USD

Bulk

QTY	Unit Price	Ext Price
4,643	$0.148	$688.093

ULN2004A

Manufacturer

Vishay Intertechnology
Manufacturer's Part Number

ULN2004A
Description

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Turn-off Time: 1 us;
Datasheet

Datasheet

4643 In Stock

Popular Products

LL4148

First Components International

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

FT232RL-REEL

FTDI

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

Details

ULN2803A

YOUTAI SEMICONDUCTOR CO LTD

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;

Details

BAV99WT1G

Onsemi

BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.

Details

2N2222A

Telcom Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

MBRS130LT3G

Onsemi

MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.

Details

1N4148

Nexperia

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BSS138LT3G

Onsemi

BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.

Details

BSS138

Philips Semiconductors

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;

Details

BSS138

Fairchild Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;

Details

LL4148

TDK

RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;

Details

BSS138LT1G

Onsemi

BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.

Details

L7805CV

STMicroelectronics

L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.

Details

M39029/56351

Esterline Technologies

CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;

Details

MURS160T3G

Onsemi

MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.

Details

CC0603KRX7R9BB103

Yageo

Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.

Details

PIC18F4550-I/P

Microchip Technology

PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.

Details

RC0402FR-0710KL

Yageo

Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.

Details

BSS138

Panjit International

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;

Details

2N2222A

Diotec Semiconductor Ag

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;

Details

ULN2004A Technical Details

TYPE	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Output Characteristics:	OPEN-COLLECTOR
Maximum Seated Height:	5.08 mm
Surface Mount:	NO
Maximum Supply Current:	1.45 mA
No. of Terminals:	16
Terminal Position:	DUAL
Package Style (Meter):	IN-LINE
JESD-30 Code:	R-PDIP-T16
Package Shape:	RECTANGULAR
Terminal Form:	THROUGH-HOLE
Built-in Protections:	TRANSIENT
Maximum Operating Temperature:	85 Cel
Package Code:	DIP
Interface IC Type:	BUFFER OR INVERTER BASED PERIPHERAL DRIVER
Width:	7.62 mm
Turn-off Time:	1 us
Driver No. of Bits:	7
Maximum Supply Voltage:	8 V
Turn-on Time:	1 us
Minimum Operating Temperature:	-20 Cel
No. of Functions:	1
Package Equivalence Code:	DIP16,.3
Output Current Flow Direction:	SINK
Length:	19.3 mm
Terminal Pitch:	2.54 mm

Category Top Products

DRV8846RGET

Texas Instruments

Texas Instruments DRV8846RGET is a 24-terminal peripheral driver with built-in protections for transient, over current, thermal, and under voltage. It operates in industrial temperature range (-40 to 85°C) with a max output current of 2A. Ideal for applications requiring source and sink output current flow direction in a compact chip carrier package.

BTS432E2E3062A

Siemens

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Shape: RECTANGULAR; Built-in Protections: OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE; Package Style (Meter): SMALL OUTLINE;

BSP762TXT

Infineon Technologies

BSP762TXT by Infineon Technologies is a peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates at a nominal voltage of 13.5 V and has a max output peak current limit of 2.4 A. This small outline package driver is ideal for applications requiring sink output current flow direction in MOS technology environments.

SN75451BDR

Texas Instruments

SN75451BDR by Texas Instruments is a peripheral driver with 2 functions, operating at 5V. It features open-collector output polarity and can handle a max output current of 0.5A. Ideal for applications requiring AND gate based peripheral drivers in commercial temperature grades.

BTS5215LAUMA1

Infineon Technologies

BTS5215LAUMA1 by Infineon: Peripheral driver with 2 functions, 40V max supply voltage, and built-in protections. Ideal for applications requiring a small outline package style and sink output current flow direction. Turn-on time of 250 us and turn-off time of 270 us make it efficient for various electronic designs.

VNS3NV04DTR-E

STMicroelectronics

VNS3NV04DTR-E by STMicroelectronics is a peripheral driver with 2 functions, 8 terminals, and built-in protections against transient, over current, over voltage, and thermal issues. It operates at supply voltages ranging from 13V to 30V and has a peak output current limit of 5A. This small outline package driver is ideal for applications requiring fast turn-on time of 1.35us and source/sink output current flow direction.

ULN2803

Motorola

Motorola's ULN2803 is an 8-bit bipolar peripheral driver with a max output current of 0.2A. Operating in industrial temperature range (-40 to 85°C), it features 18 terminals in a rectangular plastic/epoxy package, ideal for various applications requiring high-current switching capabilities.

FPF2116

Onsemi

FPF2116 by Onsemi is a peripheral driver with a max supply voltage of 5.5V and built-in protections for transient, over current, thermal, and under voltage. It has 5 terminals in a small outline package style suitable for industrial applications requiring a nominal output peak current limit of 0.3A.

LM3526M-L/NOPB

National Semiconductor

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

XSN6507DGQR

Texas Instruments

XSN6507DGQR by Texas Instruments is a peripheral driver with a max supply voltage of 36V and nominal output peak current limit of 1.3A. It operates in temperatures ranging from -55°C to 125°C, making it suitable for various industrial applications requiring high-performance buffer or inverter-based interface ICs.

NCV8401ADTRKG

Onsemi

NCV8401ADTRKG by Onsemi is a small outline peripheral driver with built-in protections against transient, over current, and over voltage. It has a nominal output peak current limit of 35A and turn-on time of 25us. Ideal for applications requiring buffer or inverter based interface ICs in automotive electronics due to AEC-Q101 screening level.

VN7140ASTR

STMicroelectronics

STMicroelectronics' VN7140ASTR is a peripheral driver with 8 terminals, offering built-in protections against transient, over current, and over voltage. It operates at supply voltages ranging from 4V to 28V and has a turn-on time of 120 us. Ideal for applications requiring buffer or inverter based interface ICs in compact designs.

ITS716G

Infineon Technologies

ITS716G by Infineon Technologies is a Peripheral Driver with 4 functions, operating at 5.5-40V, ideal for commercial applications. It offers built-in protections against transient, over current, and over voltage events, with a turn-on time of 250us and turn-off time of 270us. This small outline driver has a nominal output peak current limit of 0.7A and operates in temperatures ranging from -30 to 85°C.

BSP762T

Siemens

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Output Current Flow Direction: SOURCE;

BSP75NTA

Zetex Plc

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Code: SOP; Package Shape: RECTANGULAR; Turn-off Time: 20 us;

ITS724GFUMA1

Infineon Technologies

ITS724GFUMA1 by Infineon Technologies is a peripheral driver with 4 functions. It has a max supply voltage of 40V and can operate in temperatures ranging from -30°C to 85°C. This IC type is commonly used as a buffer or inverter based peripheral driver.

L6377D

STMicroelectronics

L6377D by STMicroelectronics is a peripheral driver with a max supply voltage of 35V and a max output current of 0.5A. It is commonly used as a buffer or inverter based peripheral driver for various applications.

VND5025AKTR-E

STMicroelectronics

VND5025AKTR-E by STMicroelectronics is a 36V peripheral driver with 2 functions, built-in protections, and CMOS technology. It has a supply voltage range of 8-36V, suitable for buffer or inverter-based applications. The small outline package with gull wing terminals makes it ideal for compact designs requiring source current flow direction.

ITS724GXT

Infineon Technologies

ITS724GXT by Infineon Technologies is a Peripheral Driver with 4 functions, operating voltage range of 5.5V to 40V, and built-in protections for transient, over current, over voltage, thermal, and under voltage. This small outline package IC is ideal for applications requiring sink output current flow direction and interface buffer or inverter based peripheral driver type.

MAX4820EUP+T

Analog Devices

MAX4820EUP+T by Analog Devices is a Peripheral Driver with 20 terminals, operating voltage range of 2.3V to 5.5V, and max output current of 0.15A. It features built-in transient protection and is ideal for industrial applications requiring a buffer or inverter based peripheral driver with sink output current flow direction.