Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

36161

Manufacturer

Tyco Electronics Amp
Manufacturer's Part Number

36161
Description

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 10 AWG; Voltage (Rated): 300 V; No. of Ways: 1; Safety Approval: UL;
Datasheet

Datasheet

Not In Stock

Popular Products

BSS123,215

NXP Semiconductors

NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.

Details

ULN2803ADWR

Texas Instruments

ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.

Details

2N2222A

Transistor & Electronic

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

1N4148WS

Tak Cheong Electronics Holdings

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99LT1G

Onsemi

BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.

Details

ULN2803ADW

Texas Instruments

ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.

Details

1N4148WT

Good-ark Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

DS18B20U+

Maxim Integrated

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;

Details

BAV99

Infineon Technologies

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Vishay Sprague

NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;

Details

BAV99

National Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SS14

Micro Commercial Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002-7-F

Diodes Incorporated

Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.

Details

2N7002

Lite-on Semiconductor

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;

Details

SS14

Frontier Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Silicon Transistor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

1N4148

Transys Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

MBR0520LT1

Onsemi

MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.

Details

BAV99

Vishay Intertechnology

Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.

Details

L7805CV

Sgs-ates Componenti Electronici S P A

Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;

Details

36161 Technical Details

TYPE	DESCRIPTION
Total Ways:	1
Wire Cross Section:	6.64 mm²
Product Type:	Ring Terminal
Safety Compliance:	UL
Additional Features:	Nylon
Wire Gauge:	10 AWG
Rated Voltage:	300 V

Category Top Products

5-796634-2

TE Connectivity

TE Connectivity 5-796634-2 is a STRIP TERMINAL BLOCK with 2 ways, UL approved for 12 AWG wire. Mount on CABLE using SCREW fastening. Ideal for industrial and electrical applications.

1757255

Phoenix Contact

Phoenix Contact 1757255 is a BOARD mount STRIP TERMINAL BLOCK with 3 ways, rated for 320V voltage and 12A current. It holds safety approvals like CB, CCA, CSA, CUL, EAC, UL. Ideal for industrial applications requiring secure connector fastening.

61866-1

TE Connectivity

RING TERMINAL; Wire Gauge: 6 AWG; Terminal Gender: FEMALE; Safety Approval: UL; No. of Ways: 1; Wire Cross Section: 15 mm2;

MS-25036-154

Abb Installation Products

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Wire Cross Section: 2 mm2; Safety Approval: UL;

395311004

Molex

Molex 395311004 is a modular terminal block with 4 ways, rated for 300V voltage and 15A current. It uses solder fastening method and is mounted on board. Ideal for applications requiring secure electrical connections in limited space.

AMP-0-0640903-1

TE Connectivity

TE Connectivity's AMP-0-0640903-1 is a FEMALE PUSH-ON TERMINAL with UL approval, rated for 300V voltage and 18 AWG wire gauge. Ideal for 0.96 mm2 wire cross sections, it excels in various applications requiring reliable electrical connections.

7701

Keystone Electronics

POWER TERMINAL; Wire Gauge: 14 AWG;

MKDSN2,5/2-5,08

Phoenix Contact

The Phoenix Contact MKDSN2,5/2-5,08 is a barrier strip terminal block with 2 ways and rated for 16A current at 400V voltage. It accepts wire gauge up to 14 AWG with a cross section of 2.5mm², fastened by screws on board mounting. Ideal for applications requiring secure electrical connections in industrial settings.

1-320551-1

TE Connectivity

TE Connectivity 1-320551-1 is a UL-approved FEMALE RING TERMINAL for 16 AWG wire with 300V rating. Ideal for applications requiring secure electrical connections in terminals & terminal blocks.

1063

Ntt

LUG TERMINAL; Additional Features: MATERIAL: STEEL; FINISH: TIN;

282834-8

TE Connectivity

TE Connectivity 282834-8 is a modular terminal block with 8 ways, rated for 10A current and 150V voltage. It uses screw fastening method, supports wire gauge up to 16 AWG, and has UL safety approval. Ideal for board mounting applications requiring terminals with wire cross section of 1.3 mm2.

1827127

Phoenix Contact

The Phoenix Contact 1827127 is a Barrier Strip Terminal Block with 2 ways, rated for 8A current and 160V voltage. It has safety approvals from CB, CSA, CUL, EAC, EN, UL, VDE. Ideal for connecting wires of 1.5mm² cross-section using screw fastening in applications requiring secure electrical connections.

725964-2

TE Connectivity

PCB TERMINAL; Terminal Gender: MALE; Safety Approval: UL;

1-320551-4

TE Connectivity

TE Connectivity 1-320551-4 is a UL-approved FEMALE RING TERMINAL for 18 AWG wire with a rated voltage of 300V. Ideal for 0.96 mm2 wire cross sections, it ensures secure electrical connections in various applications.

1787111

Phoenix Contact

Phoenix Contact 1787111 is a 2-row barrier strip terminal block with 12 ways. Rated for 160V and 8A, it has CB, CUL, UL, VDE safety approvals. Ideal for board and panel mounting applications due to its connector fastening method.

MINIMCR-2-UI-UI

Phoenix Contact

MODULAR TERMINAL BLOCK;

3-520132-2

TE Connectivity

TE Connectivity 3-520132-2 is a UL-approved PUSH-ON TERMINAL for 14 AWG wire with a rated voltage of 600V. Featuring FEMALE gender, it accommodates wire cross-sections up to 2.08 mm². Ideal for various applications requiring secure electrical connections.

236-401

Wago

The Wago 236-401 is a modular terminal block with 1 row, rated for 15A current and 300V voltage. Featuring spring-loaded fastening, it accommodates wire gauge up to 12 AWG (2.5 mm²). Ideal for board mounting applications, it holds safety approvals from CSA, UL, and VDE.

2-32589-1

Tyco Electronics Amp

FORK TERMINAL; Wire Gauge: 10 AWG; Voltage (Rated): 300 V; Wire Cross Section: 6 mm2; Terminal Gender: FEMALE; Safety Approval: UL;

MS25036-106

TE Connectivity

FORK TERMINAL; Additional Features: NYLON; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Wire Cross Section: 2 mm2; Safety Approval: UL;