Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

1787111

Manufacturer

Phoenix Contact
Manufacturer's Part Number

1787111
Description

BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD AND PANEL; Fastening Method: CONNECTOR; Additional Features: STANDARD: UL 94V-0, LCP; Voltage (Rated): 160 V; No. of Decks: 1;
Datasheet

Datasheet

Not In Stock

Popular Products

RC0805FR-0710KL

Yageo

Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.

Details

KSZ9031RNXIA

Microchip Technology

KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.

Details

2N7002

STMicroelectronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;

Details

1N4148WS

Diodes Incorporated

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Diotec Semiconductor Ag

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

FT232RL-TUBE

FTDI

FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.

Details

1N4148

Toshiba

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SMBJ18CA

Onsemi

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

DS18B20U

Maxim Integrated

DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.

Details

2N7002

Dc Components

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;

Details

1N4148WS

Taitron Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358N

Freescale Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

FDN5618P

Onsemi

FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.

Details

BAV99-7-F

Multicomp Pro

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Diodes Incorporated

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

NC7WZ17P6X

Fairchild Semiconductor

BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;

Details

2N7002

Central Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;

Details

2N7002

Inter F E T

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;

Details

BAV99

Panasonic

MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Diotec Semiconductor Ag

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1787111 Technical Details

TYPE	DESCRIPTION
Mounting Style:	Board And Panel
Other Names:	1787111-ND DMC1512G1F35LRP20THR DMC1,5/12-G1F-3,5-LRP20THR 277-8745
Total Ways:	12
Product Type:	Barrier Strip Terminal Block
Safety Compliance:	CB; CUL; UL; VDE
Additional Features:	Standard: UL 94V-0, LCP
Total Rows:	2
Product Series:	1787111
Fastening Style:	Connector
Rated Current:	8 A
Total Decks:	1
Rated Voltage:	160 V

Category Top Products

8-33457-1

TE Connectivity

RING TERMINAL; Wire Gauge: 10 AWG; Terminal Gender: FEMALE; Wire Cross Section: 6 mm2; Safety Approval: UL; No. of Ways: 1;

4-172

Bel Fuse

Bel Fuse 4-172 is a UL-approved barrier strip terminal block with 2 rows, rated for 125V and 10A. Featuring a fastening screw method, it accommodates wire gauge up to 18 AWG (0.823 mm2) in a panel mount application.

1287-ST

Keystone Electronics

TAB TERMINAL; Current (Rated): 15 A; Safety Approval: UL; Terminal Gender: MALE;

2-320571-2

TE Connectivity

TE Connectivity 2-320571-2, a UL-approved RING TERMINAL for 16 AWG wire with 300V rating. Ideal for FEMALE terminals in applications requiring 1.42 mm² wire cross section.

9-160583-2

Tyco Electronics Amp

PUSH-ON TERMINAL; Additional Features: NYLON; Wire Gauge: 16 AWG; Voltage (Rated): 300 V; Wire Cross Section: 1.5 mm2; Terminal Gender: FEMALE;

MS-25036-124

Molex

RING TERMINAL; Manufacturer Series: MS-25036; Terminal Gender: FEMALE;

MS-25036-153

Molex

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; No. of Ways: 1; Wire Cross Section: 2.08 mm2;

3-282836-2

TE Connectivity

TE Connectivity 3-282836-2 is a modular terminal block with 4 ways, rated for 300V voltage and 13.5A current. It uses solder fastening method and supports wire gauge up to 16 AWG. Ideal for board mounting applications with UL safety approval.

191640017

Molex

PUSH-ON TERMINAL; Wire Gauge: 18 AWG; Terminal Gender: FEMALE; Manufacturer Series: 19164; Wire Cross Section: 1.5 mm2;

1755778

Phoenix Contact

Phoenix Contact 1755778 is a STRIP TERMINAL BLOCK with 6 ways, rated for 12A current and 320V voltage. It accepts wire gauge up to 13 AWG and wire cross section of 2.5mm², suitable for BOARD mounting applications requiring CB, CSA, CUL, EAC, UL, VDE safety approvals.

MS25036-108

Panduit

RING TERMINAL; Additional Features: MATERIAL: POLYAMIDE; Wire Gauge: 14 AWG; Voltage (Rated): 600 V; Wire Cross Section: 2.08 mm2; Safety Approval: CSA; MIL; UL;

MC1,5/2-ST-3,5

Phoenix Contact

MC1,5/2-ST-3,5 by Phoenix Contact is a 2-way barrier strip terminal block with a rated voltage of 160V and current of 8A. It is designed for wire gauge up to 16 AWG and has a wire cross section of 1.5mm2. This terminal block is commonly used in electrical applications requiring secure connections and easy installation.

2-520128-2

TE Connectivity

TE Connectivity's 2-520128-2 PUSH-ON TERMINAL is UL approved for 600V, 18 AWG wire. With 0.82 mm2 wire cross section, it's a FEMALE terminal ideal for various applications in Terminals & Terminal Blocks category.

282836-3

TE Connectivity

TE Connectivity 282836-3 is a modular terminal block with 3 ways, rated for 13.5A current and 300V voltage. It uses screw fastening method and supports wire gauge up to 16 AWG. Ideal for board mounting applications with UL safety approval.

1-320551-2

TE Connectivity

TE Connectivity's 1-320551-2 is a UL-approved RING TERMINAL for 22 AWG wire, rated at 300V. With 0.38 mm2 wire cross section, it is ideal for FEMALE terminals in various applications.

3044089

Phoenix Contact

The Phoenix Contact 3044089 is a modular terminal block with 2 rows and DIN rail mounting. It has a rated voltage of 1000V, wire gauge of 12 AWG, and can handle a current of 24A. It is commonly used in electrical applications for secure and efficient wire connections.

3003017

Phoenix Contact

Phoenix Contact 3003017 is a DIN RAIL mounted MODULAR TERMINAL BLOCK with 2 ways. It has a rated voltage of 800V and current of 32A, suitable for wire gauge up to 12 AWG and wire cross section of 4 mm2. Safety approved by BV, CSA, CUL, DNVGL, EAC, KR for various industrial applications.

282836-2

TE Connectivity

TE Connectivity's 282836-2 is a modular terminal block with 16 AWG wire gauge, rated for 300V and 13.5A current. It features a screw fastening method and UL safety approval, suitable for board mounting applications.

1777882

Phoenix Contact

The Phoenix Contact 1777882 is a Barrier Strip Terminal Block with UL safety approval, rated for 250V voltage and 12A current. It supports wire gauge up to 12 AWG and wire cross section of 2.5mm², featuring a screw fastening method. Ideal for applications requiring secure cable mounting in electrical systems with up to 11 ways connectivity.

50011-8000

Molex

PUSH-ON TERMINAL; Wire Gauge: 24 AWG; Terminal Gender: FEMALE;