Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

1-320551-4

Manufacturer

TE Connectivity
Manufacturer's Part Number

1-320551-4
Description

RING TERMINAL; Wire Gauge: 18 AWG; Voltage (Rated): 300 V; Wire Cross Section: .96 mm2; Safety Approval: UL; Terminal Gender: FEMALE;
Datasheet

Datasheet

Not In Stock

Popular Products

2N2222A

Diotec Semiconductor Ag

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;

Details

1N4148

Jgd Semiconductors

RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;

Details

LM2675M-ADJ/NOPB

National Semiconductor

SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

2N7002

Transys Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;

Details

BAV99

Philips Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SS14

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

SMBJ18CA

Changzhou Starsea Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Continental Device India

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

2N2222A

General Transistor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

2N7002

Secos

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;

Details

MURS160T3G

Onsemi

MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.

Details

FDC5614P

TAIZHOU ELECTRONICS CO LTD

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;

Details

1552200253

Molex

WIRE AND CABLE;

Details

LM7805CT

Comset Semiconductors

Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;

Details

BAV99

Micro Commercial Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138NH6327XTSA2

Infineon Technologies

BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.

Details

LL4148

Secos

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

2N2222A

Zetex Plc

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

ISO1050DUBR

Texas Instruments

ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.

Details

1-320551-4 Technical Details

TYPE	DESCRIPTION
Other Names:	2266-1-320551-4 1-320551-4-ND 13205514 A27345 -1-320551-4-SI
Total Ways:	1
Wire Cross Section:	0.96 mm²
Terminal Gender:	Female
Product Type:	Ring Terminal
Safety Compliance:	UL
Wire Gauge:	18 AWG
Rated Voltage:	300 V

Category Top Products

1757035

Phoenix Contact

Phoenix Contact 1757035 is a BARRIER STRIP TERMINAL BLOCK with 4 ways, rated for 12A current and 320V voltage. It accepts wire gauge up to 12 AWG with wire cross section of 2.5 mm2, mounted on board using screws. Safety approved by CB, CSA, CUL, EAC, UL, VDE for various industrial applications.

MS-25036-156

Molex

RING TERMINAL; Wire Gauge: 10 AWG; Voltage (Rated): 300 V; No. of Ways: 1; Safety Approval: UL; Wire Cross Section: 6 mm2;

320559

Tyco Electronics Amp

BUTT TERMINAL; Wire Gauge: 16 AWG; Wire Cross Section: 1.65 mm2;

624

Tyco Electronics Amp

MODULAR TERMINAL BLOCK; Mounting Type: CABLE; Fastening Method: SCREW; Additional Features: POLYAMIDE; Wire Gauge: 8 AWG; Voltage (Rated): 300 V;

1725669

Phoenix Contact

Phoenix Contact 1725669 is a BARRIER STRIP TERMINAL BLOCK with 3 ways, rated for 6A current and 63V voltage. It uses SCREW fastening method, supports wire gauge up to 20 AWG, and wire cross section of 0.5 mm2. Ideal for BOARD mounting applications with CSA and UL safety approvals.

31425

TE Connectivity

RING TERMINAL; Wire Gauge: 22 AWG; No. of Ways: 1; Terminal Gender: FEMALE; Safety Approval: UL; Wire Cross Section: .4 mm2;

MS25036-116

Fci

RING TERMINAL; Wire Gauge: 8 AWG;

3544

Keystone Electronics

PUSH-ON TERMINAL; Terminal Gender: FEMALE;

1952267

Phoenix Contact

Phoenix Contact 1952267 is a UL-approved BARRIER STRIP TERMINAL BLOCK for CABLE mounting. It supports 16 AWG wire gauge with a rated voltage of 160V and current of 8A. Ideal for applications requiring secure connections in industrial settings.

282-681

Wago

The Wago 282-681 is a modular terminal block with 3 rows, DIN rail mounting, and CSA/UL safety approvals. It supports wire gauge up to 10 AWG and voltage rating of 600V, ideal for applications requiring a current rating of 30A. Fastened by spring-loaded mechanism, it accommodates wire cross-sections up to 6mm2 efficiently.

1-1776263-5

TE Connectivity

TE Connectivity 1-1776263-5 is a BARRIER STRIP TERMINAL BLOCK with 15 ways, rated for 10A current and 300V voltage. It supports wire gauge up to 16 AWG (1.4 mm2) and mounts on board using screws. Ideal for applications requiring UL safety approval in various industries.

MS25036-156

Defense Logistics Agency

RING TERMINAL; Wire Gauge: 10 AWG; Voltage (Rated): 300 V; Safety Approval: UL; Wire Cross Section: 6 mm2; No. of Ways: 1;

250-202

Wago

The Wago 250-202 is a BARRIER STRIP TERMINAL BLOCK with BOARD mounting type. It has a rated voltage of 250V, current of 8A, and accepts wire gauge up to 16 AWG. With safety approvals from CCA, CSA, KEMA, and UL, it's ideal for applications requiring secure electrical connections in limited space.

2060-453/998-404

Wago

Wago's 2060-453/998-404 Barrier Strip Terminal Block is rated for 320V, 9A current, and supports wire gauge up to 18 AWG. Ideal for BOARD mounting, it has safety approvals from CCA, CSA, CUL, EN, IEC, KEMA. Suitable for applications requiring secure connections in limited space with 0.75mm2 wire cross section.

1546670-3

Tyco Electronics Amp

BARRIER STRIP TERMINAL BLOCK; Mounting Type: CABLE AND PANEL; Fastening Method: SCREW; Additional Features: STANDARD: UL94V-0, THERMOPLASTIC; Wire Gauge: 14 AWG; Voltage (Rated): 300 V;

2022-112/000-039

Wago

BARRIER STRIP TERMINAL BLOCK;

MS25036-154

Defense Logistics Agency

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; No. of Ways: 1; Wire Cross Section: 2 mm2;

MC1.52-ST-3.81

Phoenix Contact

The Phoenix Contact MC1.52-ST-3.81 is a 2-way barrier strip terminal block with a rated voltage of 160V and current of 8A, suitable for 16 AWG wires with a cross section of 1.5mm². It features screw fastening and safety approvals from CB, CSA, CUL, EAC, UL, and VDE. Ideal for secure electrical connections in various applications requiring reliable wire termination solutions.

MC1,5/3-ST-3,81

Phoenix Contact

Phoenix Contact MC1,5/3-ST-3,81 is a 3-way barrier strip terminal block with 1.5mm2 wire cross section and 8A rated current. It is mounted on board using screws and has safety approvals like CB, CUL, UL. Ideal for applications requiring secure electrical connections at 160V voltage rating.

2-31894-2

TE Connectivity

TE Connectivity 2-31894-2 is a UL-approved FEMALE RING TERMINAL for 22 AWG wire with a rated voltage of 300V. Ideal for applications requiring terminals & terminal blocks, accommodating wire cross sections up to 1.42 mm².