Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

ISOW1412DFMR

Manufacturer

Texas Instruments
Manufacturer's Part Number

ISOW1412DFMR
Description

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: HSOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

SMBJ18CA

Mde Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

NXP Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;

Details

FDLL4148

National Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

1N4148

Taitron Components

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SMMBT2222ALT1G

Onsemi

SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.

Details

FT232RL-REEL

FTDI

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

Details

1N4148

Semiconductors

RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;

Details

ERJ3EKF1002V

Panasonic

Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.

Details

2N7002

Panjit International

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;

Details

LM7805CT

Integrated Circuit Technology

Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;

Details

LM107H

Rochester Electronics

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;

Details

1N4148WT

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Changzhou Starsea Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BSS84PH6327XTSA2

Infineon Technologies

BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.

Details

CL31B104KBCNNNC

Samsung Electro-mechanics

Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.

Details

M39029/58-360

Conesys

CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;

Details

2N7002

Vishay Siliconix

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;

Details

BSS123-7-F

Diodes Incorporated

BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.

Details

LM2931AZ-5.0G

Onsemi

LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.

Details

LL4148-GS08

Vishay Intertechnology

The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.

Details

ISOW1412DFMR Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	1.71 V
Package Body Material:	PLASTIC/EPOXY
Maximum Seated Height:	3.55 mm
Surface Mount:	YES
Terminal Finish:	NICKEL PALLADIUM GOLD
No. of Terminals:	20
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE, HEAT SINK/SLUG
JESD-30 Code:	R-PDSO-G20
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Maximum Operating Temperature:	125 Cel
Package Code:	HSOP
Interface Standard:	EIA-422; EIA-485
Interface IC Type:	LINE TRANSCEIVER
Width:	7.5 mm
Moisture Sensitivity Level (MSL):	3
Output Polarity:	TRUE
Input Characteristics:	STANDARD
Driver No. of Bits:	1
Maximum Supply Voltage:	5.5 V
Differential Output:	YES
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Package Equivalence Code:	SOP20,.4
Receiver No. of Bits:	1
Length:	12.83 mm
Peak Reflow Temperature (C):	260
Terminal Pitch:	1.27 mm
Temperature Grade:	INDUSTRIAL

Category Top Products

LTC2865HMSE#PBF

Linear Technology

LINE TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 12; Package Code: HTSSOP; Package Shape: RECTANGULAR;

MAX3232CPWRG4

Texas Instruments

MAX3232CPWRG4 by Texas Instruments is a Line Driver & Receiver with 16 terminals. It operates at 3.3/5V, has a max supply voltage of 3.6V, and offers inverted output polarity. Ideal for EIA-232-F, TIA-232-F, V.28 interfaces in commercial temperature grade applications.

ISL83483IBZ

Intersil

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

MAX3471EUA+T

Analog Devices

MAX3471EUA+T by Analog Devices is a line driver with 8 terminals, operating at 2.5-5.5V, suitable for EIA-422 and EIA-485 interfaces. It offers differential outputs, low current of 0.1mA, and max transmit delay of 2000ns, making it ideal for industrial applications requiring reliable communication over short distances.

MAX232AEWE+

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

MAX3430CSA+T

Analog Devices

MAX3430CSA+T by Analog Devices is a Line Driver & Receiver with 3.3V supply, 1500ns transmit delay, and 120ns receive delay. Ideal for EIA-422, EIA-485, TIA-485 interfaces in commercial temperature grade applications. Package: Small Outline, Surface Mount with Gull Wing terminals.

ISL83485IBZ-T7A

Renesas Electronics

Line Driver or Receivers; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 250; Moisture Sensitivity Level (MSL): 3; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3;

SP3485EN-L/TR

Exar

Exar SP3485EN-L/TR is a BICMOS line transceiver with EIA-422/EIA-485 interface. It operates at 3.3V, has 8 terminals, and offers differential output. With a max transmit delay of 60ns, it's ideal for industrial applications requiring reliable communication over short distances.

MAX3232EUE+

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;

ISO1176TDW

Texas Instruments

ISO1176TDW by Texas Instruments is a 16-terminal line driver with a max supply voltage of 5.5V and operating temperature range of -40 to 85°C. It features differential output, EIA-485 interface standard, and Schmitt trigger input characteristics, making it ideal for industrial applications requiring reliable data transmission over long distances.

MAX202ECSE+T

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

MAX233ACWP+TG36

Maxim Integrated

MAX233ACWP+TG36 by Maxim Integrated is a Line Driver & Receiver with 2 functions, operating at 5V. It has a max transmit delay of 3500ns and receiver with 2 bits. Ideal for EIA-232-E, TIA-232-E, V.24, V.28 interfaces in commercial temperature range applications.

MAX256ASA+T

Maxim Integrated

LINE DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: HLSOP; Package Shape: RECTANGULAR;

SN65HVD33DR

Texas Instruments

SN65HVD33DR by Texas Instruments is a 14-terminal line driver with 3.3V power supply, operating b/w -40 to 85°C. It features EIA-422-B, TIA-422-B, EIA-485-A, TIA-485-A, V.11 interface standards and offers differential output with 18ns transmit delay for industrial applications.

MAX485ESA+T

Analog Devices

MAX485ESA+T by Analog Devices is a line driver & receiver with a max supply voltage of 5.25V and a max transmit delay of 60ns. It is commonly used in industrial applications that require EIA-422 and EIA-485 interface standards.

MAX3485ECSA

Maxim Integrated

MAX3485ECSA by Maxim Integrated is a Line Driver & Receiver with 3.6V max supply voltage, 35ns max transmit delay, and 2.2mA max supply current. It is used in EIA-422/EIA-485 interface applications for differential signaling over short distances.

ADM3202ARNZ-REEL

Analog Devices

ADM3202ARNZ-REEL by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It features a max supply voltage of 5.5V and can withstand temperatures from -40 to 85°C. Ideal for industrial applications requiring EIA-232-E, TIA-232-E, V.28 interface standards with Schmitt trigger input characteristics.

MAX3232ID

Texas Instruments

MAX3232ID by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at 3.3/5V. It features inverted output polarity, Schmitt trigger input characteristics, and EIA-232-F interface standard. Ideal for industrial applications requiring reliable data transmission over short distances.

MAX232ESE+T

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

SN65HVD1473DGSR

Texas Instruments

SN65HVD1473DGSR by Texas Instruments is a line driver/receiver with 10 terminals, operating at 3.3V nominal voltage. It features EIA-485 interface standard, differential output, and peak reflow temperature of 260°C. Ideal for automotive applications due to its small outline package and wide temperature range from -40°C to 125°C.