Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

DS34LV86TM/NOPB

Manufacturer

Texas Instruments
Manufacturer's Part Number

DS34LV86TM/NOPB
Description

LINE RECEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

LM358N

Texas Instruments

LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.

Details

2N7002,215

Nexperia

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;

Details

SMBJ18CA

Pulse Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Changzhou Starsea Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WT

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

NXP Semiconductors

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

CGA3E2X7R1H104K080AA

TDK

CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.

Details

SS14

Panjit International

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SS14

General Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

CRGCQ0805F10R

TE Connectivity

TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.

Details

C1206C104M5RACTU

KEMET Corporation

KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.

Details

LL4148

Onsemi

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

2N2222A

Raytheon Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;

Details

DS18B20U

Maxim Integrated

DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.

Details

BSS138W-7-F

Multicomp Pro

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;

Details

LL4148

Shanghai Lunsure Electronic Technology

RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;

Details

OHN3020U

Tt Electronics Plc

OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.

Details

RC0805FR-0710RL

Yageo

Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.

Details

STM32H753IIK6

STMicroelectronics

STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.

Details

SS14+

Multicomp Pro

SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.

Details

DS34LV86TM/NOPB Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	3 V
Package Body Material:	PLASTIC/EPOXY
Minimum Supply Voltage-1:	3 V
Nominal Supply Voltage:	3.3 V
Output Characteristics:	3-STATE
Maximum Time At Peak Reflow Temperature (s):	30
Maximum Seated Height:	1.75 mm
Sub-Category:	Line Driver or Receivers
Surface Mount:	YES
Maximum Supply Current:	15 mA
Terminal Finish:	MATTE TIN
No. of Terminals:	16
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
Technology:	CMOS
JESD-30 Code:	R-PDSO-G16
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Maximum Operating Temperature:	85 Cel
Package Code:	SOP
Interface Standard:	EIA-422-B; TIA-422-B; V.11
Interface IC Type:	LINE RECEIVER
Width:	3.9 mm
Nominal Supply Voltage-1:	3.3 V
Maximum Supply Voltage-1:	3.6 V
Maximum Output Low Current:	6 Amp
Moisture Sensitivity Level (MSL):	1
Output Polarity:	TRUE
Input Characteristics:	DIFFERENTIAL SCHMITT TRIGGER
Maximum Supply Voltage:	3.6 V
Differential Output:	YES
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
No. of Functions:	4
Qualification:	Not Qualified
Package Equivalence Code:	SOP16,.25
Receiver No. of Bits:	4
Length:	9.9 mm
Maximum Receive Delay:	35 ns
Peak Reflow Temperature (C):	260
Terminal Pitch:	1.27 mm
Temperature Grade:	INDUSTRIAL
Power Supplies (V):	3.3

Category Top Products

SP3232EEN-L

Maxlinear

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

MAX232ESE-T

Maxim Integrated

MAX232ESE-T by Maxim Integrated is a Line Driver & Receiver with 2 functions, operating at 4.5-5.5V. It has a max transmit delay of 10000ns and output polarity is inverted. Widely used in industrial applications for EIA-232-E, TIA-232-E, V.28, and V.24 interface standards due to its CMOS technology and Schmitt trigger input characteristics.

SN65LVDS1DBVR

Texas Instruments

SN65LVDS1DBVR by Texas Instruments is a Line Driver with 3.6V max supply voltage, 3.1ns max transmit delay, and 85°C max operating temp. Ideal for industrial applications requiring differential output and EIA-644-A interface standard compliance.

DS26LV32ATM

Texas Instruments

DS26LV32ATM by Texas Instruments is a 4-function line receiver with 16 terminals, operating at 3.3V. It features EIA-422-B, TIA-422-B, V.11 interface standards and differential Schmitt trigger input characteristics. With a max output low current of 6A and receive delay of 35ns, it is ideal for industrial applications requiring reliable signal transmission over short distances.

MAX485ESA+T

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

ADM101EARMZ-REEL7

Analog Devices

ADM101EARMZ-REEL7 by Analog Devices is a Line Driver & Receiver with 5V power supply, operating temperature range of -40 to 85°C, and EIA-232 interface standard. It features BICMOS technology, Schmitt trigger input characteristics, and 1.6A max output low current. Ideal for industrial applications requiring reliable communication over short distances.

DRV135UAG4

Texas Instruments

DRV135UAG4 by Texas Instruments is a Line Driver & Receiver with 36V max supply voltage, 18V power supplies, and -55 to 125°C operating temperature range. It features complementary output polarity and differential output for industrial applications requiring high-speed signal transmission in compact designs.

SP3078EEN-L/TR

Maxlinear

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

MAX232CPE

Rochester Electronics

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;

MAX3232EIDBRE4

Texas Instruments

MAX3232EIDBRE4 by Texas Instruments is a Line Driver & Receiver with 3.6V max supply voltage, 16 terminals, and 1mA max supply current. It operates in industrial temperature range (-40 to 85 °C) and interfaces using EIA-232-F, TIA-232-F, V.28 standards. Ideal for applications requiring inverted output polarity and Schmitt trigger input characteristics.

ISL3330IAZ-T7A

Renesas Electronics

LINE TRANSCEIVER; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 3; JESD-609 Code: e3;

SP3232EEY-L/TR

Maxlinear

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;

ADM3101EACPZ-250R7

Analog Devices

ADM3101EACPZ-250R7 by Analog Devices is a CMOS Line Transceiver with 3.3V supply, 5.5V max voltage, and 1.6A output current. Ideal for EIA-232/TIA-232/V.28 interfaces in industrial settings due to its -40 to 85°C operating range and Schmitt trigger input characteristics.

DS26C32ATMDC

National Semiconductor

LINE RECEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; Package Code: DIE; Package Shape: UNSPECIFIED; Maximum Receive Delay: 30 ns;

SN65HVD72DR

Texas Instruments

SN65HVD72DR by Texas Instruments is a line driver & receiver with 3.6V max supply voltage, 1000ns max transmit delay, and 125°C max operating temp. Ideal for automotive applications, it features EIA-422/EIA-485 interface standards and differential output for robust communication in harsh environments.

MAX3232IDWR

Texas Instruments

MAX3232IDWR by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at -40 to 85 °C. It has a max supply voltage of 3.6 V and transmit delay of 300 ns. Ideal for industrial applications requiring EIA-232-F, TIA-232-F, V.28 interface standard compatibility.

DS26LV32ATMX/NOPB

Texas Instruments

DS26LV32ATMX/NOPB by Texas Instruments is a 4-function line driver/receiver with 3.3V power supply, operating from -40 to 85°C. It features differential output polarity, EIA-422-B interface standard, and GULL WING terminal form. Ideal for industrial applications requiring reliable differential Schmitt trigger inputs and complementary output characteristics.

MAX1480BCPI

Maxim Integrated

MAX1480BCPI by Maxim Integrated is a Line Driver & Receiver with 5V supply, 3000ns transmit delay, and EIA-422/EIA-485 interface. It has 28 terminals in a rectangular package for applications requiring high-speed data transmission over long distances.

FIN1104MTCX

Fairchild Semiconductor

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR;

ISO3082DWG4

Texas Instruments

ISO3082DWG4 by Texas Instruments is a line driver/receiver with 16 terminals, operating at -40 to 85°C. It features a max supply voltage of 5.5V, differential output, and interface standards EIA-422/485. Ideal for industrial applications requiring high-speed data transmission in compact spaces.