Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

SP3078EEN-L/TR

Manufacturer

Maxlinear
Manufacturer's Part Number

SP3078EEN-L/TR
Description

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

LL4148

Hy Electronic

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

FT232RL-REEL

FTDI

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

Details

BSS138BKW,115

NXP Semiconductors

NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.

Details

LM317T

Comset Semiconductors

Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;

Details

1N4148

Renesas Technology

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

ULN2803ADWRG4

Texas Instruments

ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.

Details

SMBJ18CA

Changzhou Starsea Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

RC0603FR-071KL

Yageo

Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.

Details

LM358MX

Texas Instruments

LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.

Details

2N7002

Transys Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;

Details

SS495ASP

Micro Switch

The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.

Details

STM32H753ZIT6

STMicroelectronics

STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.

Details

BAV99

Won-top Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Forward International Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;

Details

1N4148WS

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ECA2DHG4R7

Panasonic

ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.

Details

1N4148

Diotec Semiconductor Ag

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM107H

Linear Technology

LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.

Details

1N4148

Sangdest Microelectronics (Nanjing)

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N2222A

Texas Instruments

2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).

Details

SP3078EEN-L/TR Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	3 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	3.3 V
Maximum Seated Height:	1.75 mm
Surface Mount:	YES
Terminal Finish:	MATTE TIN
No. of Terminals:	8
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
Technology:	BICMOS
JESD-30 Code:	R-PDSO-G8
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Maximum Operating Temperature:	85 Cel
Package Code:	SOP
Interface Standard:	EIA-422; EIA-485; TIA-485
Interface IC Type:	LINE TRANSCEIVER
Width:	3.9 mm
Moisture Sensitivity Level (MSL):	1
Input Characteristics:	DIFFERENTIAL SCHMITT TRIGGER
Driver No. of Bits:	1
Maximum Supply Voltage:	3.6 V
Differential Output:	YES
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Qualification:	Not Qualified
Maximum Transmit Delay:	50 ns
Receiver No. of Bits:	1
Length:	4.9 mm
Maximum Receive Delay:	75 ns
Peak Reflow Temperature (C):	260
Terminal Pitch:	1.27 mm
Temperature Grade:	INDUSTRIAL

Category Top Products

MAX13487EESA

Analog Devices

MAX13487EESA by Analog Devices is a Line Driver & Receiver with 8 terminals, operating at 5V. It has a max supply voltage of 5.25V and can handle industrial temperatures from -40 to 85°C. Ideal for EIA-422-B and EIA-485 interfaces, it offers differential outputs and operates on a low current of 4.5mA.

ISO1412DW

Texas Instruments

ISO1412DW by Texas Instruments is a line driver/receiver with 16 terminals, operating at -40 to 125°C. It features EIA-485-A and EIA-422 interface standards, with differential output and Schmitt trigger input characteristics. Ideal for automotive applications due to its small outline package and nickel palladium gold terminal finish.

SN65LBC179QDRG4

Texas Instruments

SN65LBC179QDRG4 by Texas Instruments is a Line Driver & Receiver with 5V supply voltage, 18ns transmit delay, and -40 to 125°C operating temperature. Ideal for automotive applications, it features differential output, EIA-485/ISO 8482 interface standards, and Schmitt trigger input characteristics.

SP485ECN-L/TR

Exar

Exar's SP485ECN-L/TR is a BICMOS line transceiver with EIA-485/EIA-422 interface standard. It operates on 5V supply, has 8 terminals, and offers differential output. With peak reflow temp of 260°C, it suits commercial-grade applications requiring fast transmit delay (60ns) and low power consumption (0.00001A).

DS89C21TMX/NOPB

Texas Instruments

DS89C21TMX/NOPB by Texas Instruments is a Line Transceiver with 8 terminals, operating at 5V. It features differential outputs, Schmitt trigger input characteristics, and a max transmit delay of 10ns. Ideal for industrial applications requiring reliable data transmission in harsh environments.

SN65HVD78DGK

Texas Instruments

SN65HVD78DGK by Texas Instruments is a line driver/receiver with 3.6V max supply voltage, 15ns max transmit delay, and 8A max output low current. Ideal for automotive applications, it operates in temperatures from -40 to 125°C and interfaces using EIA-422/EIA-485 standards.

MAX3232EIDRG4

Texas Instruments

MAX3232EIDRG4 by Texas Instruments is a Line Driver & Receiver with 16 terminals and operates at 3.3/5V. It features a max supply voltage of 3.6V, Schmitt trigger input characteristics, and supports EIA-232-F, TIA-232-F, V.28 interface standards. Ideal for industrial applications requiring reliable data transmission over long distances.

MAX3072EESA-T

Maxim Integrated

MAX3072EESA-T by Maxim Integrated is a BICMOS line transceiver with EIA-422, EIA-485, TIA-485 interface standards. It operates at 3.3V with 1.5mA supply current and has a max transmit delay of 1500ns. Ideal for industrial applications requiring differential output and Schmitt trigger input characteristics.

MAX3232EIPWRG4

Texas Instruments

MAX3232EIPWRG4 by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at 3.3/5V. It features inverted output polarity, Schmitt trigger input characteristics, and supports EIA-232-F interface standard. Ideal for industrial applications requiring reliable data transmission over short distances.

SN65LVDS93ADGG

Texas Instruments

SN65LVDS93ADGG by Texas Instruments is a Line Driver & Receiver with 4 functions, operating at 3.3V. It offers differential output, complementary polarity, and industrial temperature grade suitable for various applications requiring high-speed data transmission over long distances. With a compact design and low power consumption of 116mA, it is ideal for use in industrial automation and communication systems.

MAX232EWE

Rochester Electronics

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

ISO3080DWR

Texas Instruments

ISO3080DWR by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at -40 to 85°C. It features a max transmit delay of 1.3 ns and differential output polarity for EIA-422/485 interfaces. Ideal for industrial applications requiring high-speed data transmission in compact spaces.

ADM2486BRWZ

Analog Devices

ADM2486BRWZ by Analog Devices is a Line Driver & Receiver with 16 terminals. It operates at supply voltages of 2.7-5.5 V and has a max transmit delay of 55 ns. Ideal for industrial applications requiring EIA-485-A, TIA-485-A, or ISO 8482E interface standards.

SP485EN-L/TR

Exar

Exar's SP485EN-L/TR is a BICMOS line transceiver with EIA-422 and EIA-485 interface standards. It operates at 5V, has a max supply voltage of 5.25V, and can withstand industrial temperatures from -40 to 85°C. Ideal for applications requiring differential output and Schmitt trigger input characteristics in compact designs.

THVD1452DGSR

Texas Instruments

THVD1452DGSR by Texas Instruments is a line driver & receiver with a supply voltage range of 3-5.5V, operating temperature from -40 to 125°C, and differential output interface. It features a transmit delay of 20ns, receive delay of 40ns, and is ideal for automotive applications requiring EIA-485-A/TIA-485-A standard communication.

ADV7611BSWZ-P

Analog Devices

ADV7611BSWZ-P by Analog Devices is a 64-terminal line receiver with CMOS technology. It operates b/w -40 to 85 °C and has a supply voltage range of 1.71-1.89 V. Ideal for industrial applications, it features a compact square package with low profile and gull wing terminals.

ICL3221EIVZ-T7A

Renesas Electronics

Renesas Electronics' ICL3221EIVZ-T7A is a Line Transceiver IC with CMOS technology. It operates b/w -40 to 85°C, suitable for industrial use. With EIA-232, TIA-232, V.24, and V.28 interface standards, it supports Schmitt Trigger input characteristics for reliable communication in various applications.

MAX3430ESA+

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

SN65HVD1785DR

Texas Instruments

SN65HVD1785DR by Texas Instruments is an EIA-485/TIA-485 line transceiver with a 5.5V supply voltage, 2000ns transmit delay, and 200ns receive delay. It is ideal for industrial applications requiring differential output and Schmitt trigger input characteristics in a compact small outline package.

DS90LV047ATMTCX/NOPB

National Semiconductor

LINE DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;