Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

SP485ECN-L/TR

Manufacturer

Exar
Manufacturer's Part Number

SP485ECN-L/TR
Description

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

1N4148

Leshan Radio

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SMBJ18CA

Pro-an Electronic

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;

Details

1N4148WT

Good-ark Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Formosa Microsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

CRG0805F10R

TE Connectivity

TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.

Details

BSS138

NXP Semiconductors

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;

Details

LM358DR2G

Onsemi

LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.

Details

LM358AN

Samsung

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

2N2222A

Comset Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

LM555CMX

Onsemi

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

SMBJ18CA

Shenzhen Socay Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M39029/58-360

Conesys

CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;

Details

2N7002

Taitron Components

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;

Details

SS14

Pro-an Electronic

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

CGA3E2X7R1H104K080AA

TDK

CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.

Details

MBR0520LT3G

Onsemi

MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.

Details

1N4148WS

Rochester Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Hitano Enterprise

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Bytesonic Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;

Details

LM2675M-ADJ/NOPB

Texas Instruments

LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.

Details

SP485ECN-L/TR Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	4.75 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	5 V
Maximum Seated Height:	1.75 mm
Minimum Out Swing:	1.5 V
Maximum High Level Input Current:	.00001 Amp
Sub-Category:	Line Driver or Receivers
Surface Mount:	YES
Terminal Finish:	MATTE TIN
No. of Terminals:	8
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
Technology:	BICMOS
JESD-30 Code:	R-PDSO-G8
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Maximum Operating Temperature:	70 Cel
Package Code:	SOP
Interface Standard:	EIA-485; EIA-422
Interface IC Type:	LINE TRANSCEIVER
Width:	3.9 mm
Maximum Output Low Current:	4 Amp
Moisture Sensitivity Level (MSL):	1
Input Characteristics:	DIFFERENTIAL SCHMITT TRIGGER
Driver No. of Bits:	1
Maximum Supply Voltage:	5.25 V
Differential Output:	YES
JESD-609 Code:	e3
Minimum Operating Temperature:	0 Cel
No. of Functions:	1
Qualification:	Not Qualified
Maximum Transmit Delay:	60 ns
Package Equivalence Code:	SOP8,.25
Receiver No. of Bits:	1
Length:	4.9 mm
Maximum Receive Delay:	100 ns
Peak Reflow Temperature (C):	260
Terminal Pitch:	1.27 mm
Temperature Grade:	COMMERCIAL
Power Supplies (V):	5

Category Top Products

LTC2865IDE#PBF

Linear Technology

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 12; Package Code: HVSON; Package Shape: RECTANGULAR;

THVD1451DRBR

Texas Instruments

THVD1451DRBR by Texas Instruments is a line driver & receiver with 8 terminals, operating at -40 to 125 °C. It features a max supply voltage of 5.5 V, differential output, and interface standard EIA-485-A; TIA-485-A. Ideal for automotive applications requiring fast data transmission with low power consumption.

SN65HVD3082EDGKR

Texas Instruments

SN65HVD3082EDGKR by Texas Instruments is an EIA-485-A/TIA-485-A line transceiver with a 5.5V supply voltage, 1300ns transmit delay, and -40 to 85°C operating temperature range. Ideal for industrial applications requiring differential output and Schmitt trigger input characteristics in a compact thin profile package.

SP485ECN-L/TR

Sipex

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

ISL3176EIUZ-T

Intersil

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE;

MAX3232CWE+

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

MAX3483ESA+

Analog Devices

MAX3483ESA+ by Analog Devices is a CMOS Line Transceiver with EIA-422 and EIA-485 interface standards. It operates at 3.3V, has 8 terminals, and offers differential outputs. With a max transmit delay of 1400ns, it's ideal for industrial applications requiring reliable communication over long distances.

MAX3485ESA+

Analog Devices

MAX3485ESA+ by Analog Devices is a CMOS line transceiver with EIA-422 and EIA-485 interface standards. It operates at 3.3V, has 8 terminals, and offers differential outputs. With a max transmit delay of 35ns, it's ideal for industrial applications requiring high-speed data transmission in harsh environments.

SN65LVDS1DBVRG4

Texas Instruments

SN65LVDS1DBVRG4 by Texas Instruments is a Line Driver with 3.6V max supply voltage, 3.1ns max transmit delay, and 85°C max operating temp. Ideal for EIA-644-A/TIA-644-A interface standard applications requiring true output polarity and differential output.

SN65LVDS1DBVR

Texas Instruments

SN65LVDS1DBVR by Texas Instruments is a Line Driver with 3.6V max supply voltage, 3.1ns max transmit delay, and 85°C max operating temp. Ideal for industrial applications requiring differential output and EIA-644-A interface standard compliance.

DS26LV32ATM

Texas Instruments

DS26LV32ATM by Texas Instruments is a 4-function line receiver with 16 terminals, operating at 3.3V. It features EIA-422-B, TIA-422-B, V.11 interface standards and differential Schmitt trigger input characteristics. With a max output low current of 6A and receive delay of 35ns, it is ideal for industrial applications requiring reliable signal transmission over short distances.

MAX232AEWE+T

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

LTC1535ISW#TRPBF

Linear Technology

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

SN65HVD3086EDGSR

Texas Instruments

SN65HVD3086EDGSR by Texas Instruments is a line driver & receiver with a max supply voltage of 5.5V and a max transmit delay of 20ns. It is commonly used in industrial applications that require differential output and interface standards such as EIA-485-A, TIA-485-A, and EIA-422.

DRV135UA/2K5

Texas Instruments

DRV135UA/2K5 by Texas Instruments is a Line Driver with 8 terminals, operating at ±18V power supplies. It features a max supply voltage of 36V and can withstand temperatures from -55°C to 125°C. Ideal for industrial applications requiring complementary output polarity and differential outputs.

L6360TR

STMicroelectronics

L6360TR by STMicroelectronics is a Line Transceiver IC with 26 terminals and a supply voltage range of 18-30V. It operates in automotive-grade temperatures (-40 to 125°C) and has a max output low current of 2A. This surface-mount chip carrier is ideal for differential Schmitt trigger applications requiring high reliability and performance.

ISL3173EIUZ-T

Renesas Electronics

ISL3173EIUZ-T by Renesas Electronics is a Line Driver & Receiver with 10 terminals, operating at -40 to 85°C. It features EIA-422 and EIA-485 interface standards, BICMOS technology, and a supply voltage range of 3V to 3.6V. Ideal for industrial applications requiring differential output and Schmitt trigger input characteristics.

MAX3485ECSA+T

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

FIN1104MTC

Onsemi

FIN1104MTC by Onsemi is a Line Transceiver with 4-bit driver and receiver functions. It operates at 3.3V supply voltage, has a max transmit delay of 1.75ns, and supports EIA-644-A interface standard. Ideal for industrial applications requiring differential input characteristics in a compact package style with dual terminal position.

ISL3280EIHZ-T7A

Renesas Electronics

LINE RECEIVER; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn) - annealed;