Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

PCA9515ADP,118

Manufacturer

NXP Semiconductors
Manufacturer's Part Number

PCA9515ADP,118
Description

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
Datasheet

Datasheet

Not In Stock

Popular Products

LL4148

International Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LM358AN

Fairchild Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

1N4148

Transys Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SS14

Meritek Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

TCA6424ARGJR

Texas Instruments

TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.

Details

BAV99

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

KSZ9031RNXIA

Microchip Technology

KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.

Details

ERJ6ENF10R0V

Panasonic

Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.

Details

SMBJ18CA

Multicomp Pro

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;

Details

LL4148

Leshan Radio

RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;

Details

LL4148

Semtech Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

2N2222A

STMicroelectronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;

Details

BAV99

Panasonic

MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Aeroflex/metelics

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;

Details

BSS138W-7-F

Diodes Incorporated

Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.

Details

2N7002,215

Nexperia

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;

Details

LM317T

STMicroelectronics

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;

Details

SMBJ18CA

Jiangsu Jiejie Microelectronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Itt Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LL4148-GS08

Vishay Telefunken

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

PCA9515ADP,118 Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	3 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	3.3 V
Maximum Time At Peak Reflow Temperature (s):	30
Maximum Seated Height:	1.1 mm
Sub-Category:	Line Driver or Receivers
Surface Mount:	YES
Terminal Finish:	NICKEL PALLADIUM GOLD
No. of Terminals:	8
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
Technology:	CMOS
JESD-30 Code:	S-PDSO-G8
Package Shape:	SQUARE
Terminal Form:	GULL WING
Maximum Operating Temperature:	85 Cel
Package Code:	TSSOP
Interface Standard:	I2C
Interface IC Type:	LINE TRANSCEIVER
Width:	3 mm
Moisture Sensitivity Level (MSL):	1
Driver No. of Bits:	2
Maximum Supply Voltage:	3.6 V
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 Cel
No. of Functions:	2
Qualification:	Not Qualified
Maximum Transmit Delay:	130 ns
Package Equivalence Code:	TSSOP8,.19
Receiver No. of Bits:	2
Length:	3 mm
Maximum Receive Delay:	190 ns
Peak Reflow Temperature (C):	260
Terminal Pitch:	.65 mm
Temperature Grade:	INDUSTRIAL
Power Supplies (V):	2.5/3.3

Category Top Products

AM26LV32CDR

Texas Instruments

AM26LV32CDR by Texas Instruments is a 16-terminal line driver/receiver with 4 functions. Operating at 3.3V, it has a max supply voltage of 3.6V and supports EIA-422-B, TIA-422-B, V.11 standards. Ideal for applications requiring differential Schmitt trigger input characteristics and true output polarity in commercial temperature grades.

MAX3232ESE-T

Maxim Integrated

MAX3232ESE-T by Maxim Integrated is a Line Driver & Receiver with 3.3/5V power supplies, operating from -40 to 85°C. It features INVERTED output polarity, TOTEM-POLE output characteristics, and SCHMITT TRIGGER input characteristics. Ideal for EIA-232/EIA-562 interface standards in industrial applications.

MAX485ESA-T

Maxim Integrated

MAX485ESA-T by Maxim Integrated is a CMOS line transceiver with 8 terminals, operating at 5V. It features EIA-422 and EIA-485 interface standards, with a max supply voltage of 5.25V and output polarity as complementary. Ideal for industrial applications requiring differential outputs and Schmitt trigger inputs.

NCN5150DR2G

Onsemi

The Onsemi NCN5150DR2G is a Line Transceiver with 3.3V supply voltage, 0 ns receive delay, and MSL of 2. Housed in a small outline plastic/epoxy package, it is ideal for high-speed communication applications requiring reliable signal transmission.

MAX3430ESA+T

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

ISO1176DWRG4

Texas Instruments

ISO1176DWRG4 by Texas Instruments is a line driver/receiver with max supply voltage of 5.5V, transmit delay of 40ns, and differential output. Ideal for EIA-485/TIA-485 interfaces in industrial applications due to its small outline package and dual terminal position.

ZIOL2401#W

Renesas Electronics

Line Driver or Receivers;

ISL3283EIHZ-T7A

Intersil

LINE RECEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR;

MAX232EESE+

Analog Devices

MAX232EESE+ by Analog Devices is a Line Driver & Receiver with 2 functions, operating at 5V. It has a max supply voltage of 5.5V and operates in industrial temperature range (-40 to 85°C). This IC is used for EIA-232-E, TIA-232-E, V.28 interfaces in various applications requiring inverted output polarity and Schmitt trigger input characteristics.

MAX3221IDBRG4

Texas Instruments

MAX3221IDBRG4 by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at 3.3/5V. It features inverted output polarity, CMOS technology, and EIA-232-F interface standard. Ideal for industrial applications requiring a max supply voltage of 5.5V and an operating temperature range from -40 to 85°C.

SN65LVDT2DBV

Texas Instruments

SN65LVDT2DBV by Texas Instruments is a line driver & receiver with a max supply voltage of 3.6V and max transmit delay of 3.1ns. It is used in industrial applications requiring differential Schmitt trigger input characteristics and EIA-644-A/TIA-644-A interface standard.

AM26LS31CN

Texas Instruments

AM26LS31CN by Texas Instruments is a line driver & receiver with 4 functions. It has a max supply voltage of 5.25V and a max transmit delay of 20ns. This IC is commonly used in EIA-422-B, TIA-422-B, and V.11 interface standards.

AM26LV32EIPWRG4

Texas Instruments

AM26LV32EIPWRG4 by Texas Instruments is a 16-terminal line driver with 3.6V max supply voltage, operating at -40 to 85°C. It features EIA-422-B interface standard and differential Schmitt trigger input characteristics, suitable for industrial applications requiring reliable signal transmission over short distances.

MAX485ECSA+T

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

DS26LV32ATM

Texas Instruments

DS26LV32ATM by Texas Instruments is a 4-function line receiver with 16 terminals, operating at 3.3V. It features EIA-422-B, TIA-422-B, V.11 interface standards and differential Schmitt trigger input characteristics. With a max output low current of 6A and receive delay of 35ns, it is ideal for industrial applications requiring reliable signal transmission over short distances.

IL3285E

Nve

The Nve IL3285E is an EIA-485 line transceiver with 16 terminals, operating at a supply voltage range of 3.3V to 5.5V. It features a max transmit delay of 65ns and differential output for industrial applications requiring reliable communication over long distances. The compact rectangular package design makes it suitable for surface mount installations in various electronic systems.

ICL3232IBNZ-T7A

Renesas Electronics

Line Driver or Receivers; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN;

SN75176BPSRG4

Texas Instruments

SN75176BPSRG4 by Texas Instruments is a Line Driver & Receiver with 8 terminals, operating at 5V. It features a max transmit delay of 22ns and differential output. Ideal for EIA-422-B, TIA-422-B, EIA-485-A, TIA-485-A interfaces in commercial temperature applications.

ISO1410BDWR

Texas Instruments

ISO1410BDWR by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at -40 to 125 °C. It features EIA-485-A, TIA-485-A, and EIA-422 interface standards, with a max transmit delay of 570 ns. Ideal for automotive applications due to its small outline package and differential output capabilities.

ISL3330IAZ-T

Renesas Electronics

ISL3330IAZ-T by Renesas Electronics is a Line Driver & Receiver with 2 functions, operating at 3.15-3.45V. It features EIA-232 interface standard, Schmitt trigger input characteristics, and BICMOS technology. Ideal for industrial applications requiring reliable communication over short distances.