Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

MAX3160EAP+T

Manufacturer

Analog Devices
Manufacturer's Part Number

MAX3160EAP+T
Description

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SSOP; Package Shape: RECTANGULAR;
Datasheet

Not In Stock

Popular Products

2N2222A

Minilogic Device

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;

Details

AH180-WG-7

Diodes Incorporated

AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.

Details

ERJ2RKF1002X

Panasonic

Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.

Details

CR0805-FX-10R0ELF

Bourns

Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.

Details

1N4148WS

Multicomp Pro

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

General Instrument

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Synsemi

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM358AN

Fairchild Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

NE555DR

Texas Instruments

NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.

Details

MMBT3906LT1G

Onsemi

MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.

Details

SS14

Silicon Standard

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

M/a-com Technology Solutions

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;

Details

CRG0805F10K

TE Connectivity

TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.

Details

2N2222A

Micropac Industries

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

1N4148

Bkc Semiconductors

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

MBR0540T1G

Onsemi

MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.

Details

MMBT3904LT1G

Onsemi

MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.

Details

1N4148

Philips Components

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

MBRS360T3G

Onsemi

MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.

Details

SMBJ18CA

General Instrument

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MAX3160EAP+T Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	3 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	3.3 V
Maximum Time At Peak Reflow Temperature (s):	30
Maximum Seated Height:	1.99 mm
Minimum Out Swing:	10 V
Sub-Category:	Line Driver or Receivers
Surface Mount:	YES
Maximum Supply Current:	5.5 mA
Terminal Finish:	Matte Tin (Sn) - annealed
No. of Terminals:	20
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE, SHRINK PITCH
JESD-30 Code:	R-PDSO-G20
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Maximum Operating Temperature:	85 Cel
Package Code:	SSOP
Interface Standard:	EIA-232; EIA-422; EIA-485
Interface IC Type:	LINE TRANSCEIVER
Width:	5.29 mm
Maximum Output Low Current:	2.5 Amp
Moisture Sensitivity Level (MSL):	1
Input Characteristics:	SCHMITT TRIGGER
Driver No. of Bits:	2
Maximum Supply Voltage:	5.5 V
Differential Output:	NO
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
No. of Functions:	2
Qualification:	Not Qualified
Maximum Transmit Delay:	800 ns
Package Equivalence Code:	SSOP20,.3
Receiver No. of Bits:	2
Length:	7.2 mm
Maximum Receive Delay:	150 ns
Additional Features:	DELAYS MEASURED IN EIA-422, EIA-485 MODE
Peak Reflow Temperature (C):	260
Terminal Pitch:	.65 mm
Temperature Grade:	INDUSTRIAL
Power Supplies (V):	3.3/5

Category Top Products

ICL3232IBNZ-T

Integrated Device Technology

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

MAX2769ETI+T

Analog Devices

LINE RECEIVER; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Finish: Matte Tin (Sn) - annealed;

MAX3232CWE+

Analog Devices

MAX3232CWE+ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3/5V. It features INVERTED output polarity, TOTEM-POLE output characteristics, and SCHMITT TRIGGER input characteristics. Ideal for EIA-232/TIA-232 interface standard applications in commercial temperature grade environments.

MAX3485ESA+T

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

MAX3232CDRE4

Texas Instruments

MAX3232CDRE4 by Texas Instruments is a Line Driver & Receiver with 16 terminals. It operates at 3.3/5V, has a max supply voltage of 3.6V, and offers inverted output polarity. Ideal for EIA-232-F, TIA-232-F, V.28 interfaces in commercial temperature grades applications.

ST485CDR

STMicroelectronics

ST485CDR by STMicroelectronics is a Line Driver & Receiver with 5V supply, 70ns max transmit delay, and EIA-422/EIA-485 interface standard. Ideal for applications requiring differential output, such as industrial automation and communication systems.

AM26LS31CN

Philips Components

LINE DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Shape: RECTANGULAR; JESD-30 Code: R-PDIP-T16;

ST485ECDR

STMicroelectronics

ST485ECDR by STMicroelectronics is a Line Driver & Receiver with 8 terminals, operating at 5V. It has a max supply voltage of 5.25V and can withstand temperatures from 0 to 70°C. Ideal for EIA-422 and EIA-485 interfaces, it offers fast transmission with a max delay of 45ns.

ISL3173EIUZ-T

Intersil

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE;

MAX3232EUE-T

Maxim Integrated

MAX3232EUE-T by Maxim Integrated is a Line Driver & Receiver with 3.3/5V power supplies, EIA-232/EIA-562 interface standard, and 1.6A max output low current. Ideal for industrial applications, it operates b/w -40 to 85°C with a small outline package style and dual terminal position.

ISO3088DWR

Texas Instruments

ISO3088DWR by Texas Instruments is a line driver/receiver with 16 terminals, operating at -40 to 85°C. It features a max transmit delay of 45ns, differential output, and interface standards EIA-422/485. Ideal for industrial applications requiring reliable data transmission in harsh environments.

P82B96DR

Texas Instruments

P82B96DR by Texas Instruments is a Line Transceiver with 2 functions, operating at -40 to 85 °C. It has a supply voltage range of 2-15 V and terminal pitch of 1.27 mm. Ideal for industrial applications requiring standard input characteristics and dual-terminal position in a small outline package style.

ST3232CDR

STMicroelectronics

ST3232CDR by STMicroelectronics is a Line Driver & Receiver with 16 terminals, operating at 3-5.5V. It features dual functions, CMOS technology, and EIA-232 interface standard. Ideal for commercial applications requiring reliable data transmission in small outline packages.

SN65HVD10DR

Texas Instruments

SN65HVD10DR by Texas Instruments is a line driver and receiver with a max supply voltage of 3.6V. It has a max transmit delay of 16ns and operates in an industrial temperature range. This IC is commonly used as a line transceiver for EIA-485-A, TIA-485-A, and ISO 8482 interfaces.

DS26C32ATM/NOPB

National Semiconductor

LINE RECEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

SN65LVDM176DGKR

Texas Instruments

SN65LVDM176DGKR by Texas Instruments is a CMOS Line Transceiver with 8 terminals, operating at 3.3V. It offers differential input characteristics and a max transmit delay of 2.7ns, making it ideal for industrial applications requiring high-speed data transmission over short distances.

FIN1108MTD

Fairchild Semiconductor

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: TSSOP; Package Shape: RECTANGULAR;

LTM2881IY-3

Analog Devices

LTM2881IY-3 by Analog Devices is a Line Transceiver with EIA-485-A, TIA-485-A, and EIA-422 interface standards. It operates at 3.3V nominal voltage and has a max transmit delay of 85ns. This industrial-grade device is ideal for applications requiring differential output and Schmitt trigger input characteristics.

THVD1400DRLR

Texas Instruments

THVD1400DRLR by Texas Instruments is an 8-terminal line driver with a supply voltage range of 3-5.5V, operating temperature from -40 to 125°C, and transmit delay of 500ns. Ideal for EIA-485-A/TIA-485-A interfaces, this IC offers differential outputs and Schmitt trigger input characteristics for reliable data transmission in industrial applications.

ADM2682EBRIZ

Analog Devices

ADM2682EBRIZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3-5.5V. It offers EIA-485-A, TIA-485-A, EIA-422, ISO 8482 interface standards for industrial applications. Features include differential outputs, dual terminal position, and a max transmit delay of 100ns.