Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

ADM2582EBRWZ

Manufacturer

Analog Devices
Manufacturer's Part Number

ADM2582EBRWZ
Description

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

1N4148W-7-F

Multicomp Pro

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

General Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Vpt Components

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;

Details

1554216004

Molex

WIRE AND CABLE;

Details

LM2675M-ADJ/NOPB

Texas Instruments

LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.

Details

SS495ASP

Micro Switch

The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.

Details

LM317T

Inchange Semiconductor

Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;

Details

SS495A-SP

Honeywell Sensing And Control

SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.

Details

LM358M

Texas Instruments

LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.

Details

FDLL4148

Onsemi

FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.

Details

1N4148

NXP Semiconductors

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

PIC18F4550-I/P

Microchip Technology

PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.

Details

1N4148

International Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

M39029/58-360

Glenair

CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;

Details

1N4148

Terry Semiconductor

RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;

Details

LAN8720AI-CP-TR

Microchip Technology

LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.

Details

DS18B20U+

Analog Devices

DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.

Details

LM358D-T

Philips Semiconductors

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

IRLML6401TRPBF

Infineon Technologies

IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.

Details

MBR0520LT3G

Onsemi

MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.

Details

ADM2582EBRWZ Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	3 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	3.3 V
Maximum Time At Peak Reflow Temperature (s):	30
Maximum Seated Height:	2.65 mm
Minimum Out Swing:	1.5 V
Maximum High Level Input Current:	.00001 Amp
Sub-Category:	Line Driver or Receivers
Surface Mount:	YES
Maximum Supply Current:	230 mA
Terminal Finish:	MATTE TIN
No. of Terminals:	20
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
JESD-30 Code:	R-PDSO-G20
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Maximum Operating Temperature:	85 Cel
Package Code:	SOP
Interface Standard:	EIA-485-A; TIA-485-A; ISO 8482E
Interface IC Type:	LINE TRANSCEIVER
Width:	7.5 mm
Maximum Output Low Current:	1.5 Amp
Moisture Sensitivity Level (MSL):	3
Input Characteristics:	DIFFERENTIAL SCHMITT TRIGGER
Driver No. of Bits:	1
Maximum Supply Voltage:	5.5 V
Differential Output:	YES
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Qualification:	Not Qualified
Maximum Transmit Delay:	700 ns
Package Equivalence Code:	SOP20,.4
Receiver No. of Bits:	1
Length:	12.8 mm
Maximum Receive Delay:	200 ns
Peak Reflow Temperature (C):	260
Terminal Pitch:	1.27 mm
Temperature Grade:	INDUSTRIAL
Power Supplies (V):	3.3/5

Category Top Products

MAX232ACPE

Rochester Electronics

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;

LT1785IS8#PBF

Linear Technology

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

SN65C3232EDR

Texas Instruments

SN65C3232EDR by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at -40 to 85°C. It has a max supply voltage of 3.6V and peak reflow temperature of 260°C. Ideal for industrial applications requiring EIA-232 interface standard and inverted output polarity.

MAX3232ECPE+

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;

LTC2862AIDD-2#PBF

Analog Devices

LTC2862AIDD-2#PBF by Analog Devices is an industrial-grade Line Transceiver with EIA-422 and EIA-485 interface standards. It operates b/w -40 to 85 °C, has a max supply voltage of 5.5 V, and offers differential output for various applications in communication systems.

MAX3485EESA+T

Analog Devices

Analog Devices' MAX3485EESA+T is a CMOS line transceiver with EIA-422 and EIA-485 interface standards. It operates at 3.3V, has 8 terminals, and offers differential output. With a max transmit delay of 35ns, it's ideal for industrial applications requiring fast data transmission in harsh environments.

LT1785CN8#PBF

Analog Devices

LT1785CN8#PBF by Analog Devices is a Line Driver & Receiver with 8 terminals, operating at 4.75-5.25V. It offers differential output, EIA-422/EIA-485 interface standards, and operates in commercial temperature range of 0-70°C. Ideal for applications requiring high-speed data transmission and noise immunity in industrial settings.

MAX3295AUT-T

Analog Devices

MAX3295AUT-T by Analog Devices is a line driver & receiver with a max supply voltage of 3.465V and a max transmit delay of 25ns. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.

SN65HVD1781DRG4

Texas Instruments

SN65HVD1781DRG4 by Texas Instruments is a line driver/receiver with 5.5V max supply voltage, 200ns max transmit delay, and differential output. Ideal for automotive applications due to its EIA-485-A interface standard and operating temperature range of -40 to 125°C.

AM26LS31CDR

Texas Instruments

AM26LS31CDR by Texas Instruments is a line driver & receiver with 4 functions. It has a max supply voltage of 5.25V and a max transmit delay of 20ns. This IC is commonly used in EIA-422-B, TIA-422-B, and V.11 interface standards for driving and receiving signals in various applications.

XISOW1412DFMR

Texas Instruments

XISOW1412DFMR by Texas Instruments is a Line Transceiver IC with EIA-422/EIA-485 interface standards. It operates at 1.71-1.89V, has 20 terminals, and offers differential output. With a small outline package style, it's ideal for applications requiring high-speed data transmission in industrial environments.

AM26LS31CN

Rochester Electronics

LINE DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;

SN65HVD1470DGSR

Texas Instruments

SN65HVD1470DGSR by Texas Instruments is a line driver/receiver with 10 terminals, operating at 3-3.6V. It features EIA-485 interface standard, differential output, and peak reflow temp of 260°C. Ideal for automotive applications due to its small outline package and Schmitt trigger input characteristics.

LTC2855IDE#PBF

Linear Technology

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 12; Package Code: HVSON; Package Shape: RECTANGULAR;

LTC2870IUFD#PBF

Analog Devices

LTC2870IUFD#PBF by Analog Devices is a Line Driver & Receiver with 2 functions, operating at -40 to 85°C. It features a max supply voltage of 5.5V and offers EIA-232, EIA-422, EIA-485 interface standards. Ideal for industrial applications requiring differential outputs with low current consumption.

SP3485CN-L/TR

Exar

Exar SP3485CN-L/TR is a BICMOS line transceiver with EIA-422/EIA-485 interface. It operates at 3.3V, has 8 terminals, and offers differential output. With a max transmit delay of 60ns, it's ideal for industrial applications requiring fast data transmission in commercial temperature range of 0-70°C.

ISO3080DWR

Texas Instruments

ISO3080DWR by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at -40 to 85°C. It features a max transmit delay of 1.3 ns and differential output polarity for EIA-422/485 interfaces. Ideal for industrial applications requiring high-speed data transmission in compact spaces.

AM26C32IDR

Texas Instruments

AM26C32IDR by Texas Instruments is a 4-function line driver/receiver with 16 terminals. It operates b/w -40 to 85°C, with a supply voltage range of 4.5-5.5V and max output low current of 6A. Ideal for EIA-422-B/TIA-422-B interfaces in industrial applications requiring differential Schmitt trigger input characteristics.

MAX3221ECAE+

Analog Devices

MAX3221ECAE+ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3-5.5V. It features BICMOS technology, SCHMITT TRIGGER input, and supports EIA-232/TIA-232/V.24/V.28 interfaces. Ideal for applications requiring reliable data transmission in commercial temperature range of 0-70°C.

MAX3232CSE

Maxim Integrated

MAX3232CSE by Maxim Integrated is a Line Driver & Receiver with 16 terminals, operating at 3-5.5V. It features Totem-Pole output, Inverted polarity, and Schmitt Trigger input characteristics. Ideal for EIA-232/EIA-562 interfaces in commercial-grade applications requiring high-speed data transmission.