Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

MAX485ESA+T

Manufacturer

Maxim Integrated
Manufacturer's Part Number

MAX485ESA+T
Description

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

M39029/56-351

Carlisle Interconnect Technologies

CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;

Details

INA826AIDGKR

Texas Instruments

INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.

Details

ECA2DHG4R7

Panasonic

ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.

Details

1N4148WS

Onsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

STM32H753IIT6

STMicroelectronics

STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.

Details

OPA2227UA

Burr-Brown Corporation

OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

PIC18F4550-I/ML

Microchip Technology

The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.

Details

1N4148

American Power Devices

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148WT

Formosa Microsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM555CM

Harris Semiconductor

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

1N4148

Synsemi

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N2222A

National Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;

Details

SMBJ18CA

Fagor Electronica S Coop

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SBAV99LT1G

Onsemi

SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.

Details

BAV99

Lite-on Technology

RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;

Details

SMBJ18CA

Shenzhen Socay Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

Continental Device India

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;

Details

LL4148

Weitron Technology

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

MBRS130LT3G

Onsemi

MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.

Details

ERJ2RKF1002X

Panasonic

Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.

Details

MAX485ESA+T Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	4.75 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	5 V
Output Characteristics:	3-STATE
Maximum Time At Peak Reflow Temperature (s):	30
Maximum Seated Height:	1.75 mm
Minimum Out Swing:	1.5 V
Maximum High Level Input Current:	.001 Amp
Sub-Category:	Line Driver or Receivers
Surface Mount:	YES
Maximum Supply Current:	.9 mA
Terminal Finish:	MATTE TIN
No. of Terminals:	8
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
Technology:	CMOS
JESD-30 Code:	R-PDSO-G8
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Maximum Operating Temperature:	85 Cel
Package Code:	SOP
Interface Standard:	EIA-422; EIA-485
Interface IC Type:	LINE TRANSCEIVER
Width:	3.9 mm
Maximum Output Low Current:	4 Amp
Moisture Sensitivity Level (MSL):	1
Output Polarity:	COMPLEMENTARY
Input Characteristics:	DIFFERENTIAL SCHMITT TRIGGER
Driver No. of Bits:	1
Maximum Supply Voltage:	5.25 V
Differential Output:	YES
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Qualification:	Not Qualified
Maximum Transmit Delay:	60 ns
Package Equivalence Code:	SOP8,.25
Receiver No. of Bits:	1
Length:	4.9 mm
Maximum Receive Delay:	200 ns
Additional Features:	COMMON I/O; 1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER
Peak Reflow Temperature (C):	260
Terminal Pitch:	1.27 mm
Temperature Grade:	INDUSTRIAL
Power Supplies (V):	5

Category Top Products

FIN1104MTCX

Fairchild Semiconductor

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR;

MAX3160EAP+T

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SSOP; Package Shape: RECTANGULAR;

MAX3485EESA

Maxim Integrated

MAX3485EESA by Maxim Integrated is a CMOS Line Transceiver with EIA-422 and EIA-485 interface standards. It operates at 3.3V, has 8 terminals, and offers differential output. With a max transmit delay of 35ns, it's ideal for industrial applications requiring fast data transmission over short distances.

MAX485EPA+

Analog Devices

MAX485EPA+ by Analog Devices is a CMOS line driver/receiver with 8 terminals, operating at 5V. It features a max transmit delay of 60ns and can handle differential outputs. Ideal for EIA-422/EIA-485 interfaces in industrial applications due to its wide temperature range (-40 to 85°C) and low supply current (0.9mA).

MAX3232EIDR

Texas Instruments

MAX3232EIDR by Texas Instruments is a line driver and receiver with a max supply voltage of 3.6V. It has 2 functions and is used in applications requiring EIA-232-F, TIA-232-F, or V.28 interface standards.

MAX3232CDRG4

Texas Instruments

MAX3232CDRG4 by Texas Instruments is a Line Driver & Receiver with 16 terminals. It operates at 3.3/5V, has a max supply voltage of 3.6V, and offers inverted output polarity. Ideal for EIA-232-F, TIA-232-F, V.28 interfaces in commercial temperature grades applications.

MAX3232ESE+G1Z

Maxim Integrated

LINE TRANSCEIVER;

ST485EXDR

STMicroelectronics

ST485EXDR by STMicroelectronics is a line driver & receiver with 1 function. It has a max supply voltage of 5.25V and operates in temperatures ranging from -55 to 125°C. It is commonly used in EIA-422 and EIA-485 interface applications.

ZIOL2401#W

Renesas Electronics

Line Driver or Receivers;

ISOW1432BDFMR

Texas Instruments

ISOW1432BDFMR by Texas Instruments is a line driver & receiver with 20 terminals, operating at -40 to 125 °C. It features a max supply voltage of 1.89 V and max transmit delay of 125 ns. Ideal for EIA-422 & EIA-485 interfaces, this IC has a small outline package style for various applications.

ISO3082DWG4

Texas Instruments

ISO3082DWG4 by Texas Instruments is a line driver/receiver with 16 terminals, operating at -40 to 85°C. It features a max supply voltage of 5.5V, differential output, and interface standards EIA-422/485. Ideal for industrial applications requiring high-speed data transmission in compact spaces.

MAX3221IDBRG4

Texas Instruments

MAX3221IDBRG4 by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at 3.3/5V. It features inverted output polarity, CMOS technology, and EIA-232-F interface standard. Ideal for industrial applications requiring a max supply voltage of 5.5V and an operating temperature range from -40 to 85°C.

SN65HVD485EDRG4

Texas Instruments

SN65HVD485EDRG4 by Texas Instruments is an EIA-485-A/TIA-485-A line transceiver with a 5.5V supply voltage, 30ns transmit delay, and -40 to 85°C operating temperature range. Ideal for industrial applications requiring differential output and Schmitt trigger input characteristics in a compact small outline package.

THVD1450DR

Texas Instruments

THVD1450DR by Texas Instruments is a line driver & receiver with 8 terminals, operating at -40 to 125 °C. It features a max supply voltage of 5.5 V, differential output, and interface standard EIA-485-A; TIA-485-A. Ideal for automotive applications requiring fast transmission speeds and reliable communication in compact designs.

L9637D

STMicroelectronics

L9637D by STMicroelectronics is a Line Transceiver IC with Schmitt Trigger input characteristics. It operates at 3-7V supply voltage range and conforms to ISO 9141 interface standard. Ideal for automotive applications requiring reliable communication over short distances.

SP3485CN-L

Maxlinear

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

SN65HVD1781DR

Texas Instruments

SN65HVD1781DR by Texas Instruments is a Line Driver & Receiver with 3.3/5V power supplies, 200ns max transmit delay, and EIA-485-A interface standard. Ideal for automotive applications due to its differential output, operating temperature range of -40 to 125°C, and small outline package style.

MAX232EESE+

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

SN65HVD485EDGKR

Texas Instruments

SN65HVD485EDGKR by Texas Instruments is a line driver and receiver with a max supply voltage of 5.5V. It has a small outline, thin profile package style and is suitable for industrial temperature grade applications.

SN75176BPSR

Texas Instruments

SN75176BPSR by Texas Instruments is a line driver/receiver with 5.25V max supply voltage, 22ns max transmit delay, and 8A max output low current. It is used in EIA-422-B, TIA-422-B, EIA-485-A, TIA-485-A interfaces for data transmission applications requiring high-speed differential signaling.