Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

FIN1001M5X

Manufacturer

Fairchild Semiconductor
Manufacturer's Part Number

FIN1001M5X
Description

LINE DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

MS3V-T1R32.768KHZ+/-20PPM12.5PF

Golledge Electronics

MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.

Details

FSMLF327

Fox Electronics

FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.

Details

LL4148

Synsemi

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

M39029/58-360

Molex

CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;

Details

CRGCQ0805F10K

TE Connectivity

TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.

Details

SMBJ18CA

Meritek Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Bharat Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

BSS123LT1G

Onsemi

BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.

Details

1N4148

Taitron Components

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

CRCW06030000Z0EAHP

Vishay Intertechnology

Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.

Details

LL4148-GS08

Vishay Intertechnology

The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.

Details

SMBJ18CA

Sangdest Microelectronics (Nanjing)

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

SPC TECHNOLOGY/ MULTICOMP

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148W-T

Micro Commercial Components

1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.

Details

LL4148

Temic Semiconductors

RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

1N4148

Wuxi Xuyang Electronic

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

ECA2DHG4R7

Panasonic

ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.

Details

BAV99

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358MX

Fairchild Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

LM107H/883C

National Semiconductor

LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.

Details

FIN1001M5X Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	3 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	3.3 V
Maximum Time At Peak Reflow Temperature (s):	30
Maximum Seated Height:	1.4 mm
Minimum Out Swing:	.25 V
Maximum High Level Input Current:	.00002 Amp
Sub-Category:	Line Driver or Receivers
Surface Mount:	YES
Terminal Finish:	MATTE TIN
No. of Terminals:	5
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH
JESD-30 Code:	R-PDSO-G5
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Maximum Operating Temperature:	85 Cel
Package Code:	LSSOP
Interface Standard:	EIA-644; TIA-644
Interface IC Type:	LINE DRIVER
Width:	1.6 mm
Moisture Sensitivity Level (MSL):	1
Input Characteristics:	STANDARD
Driver No. of Bits:	1
Maximum Supply Voltage:	3.6 V
Differential Output:	YES
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Qualification:	Not Qualified
Maximum Transmit Delay:	1.5 ns
Package Equivalence Code:	TSOP5/6,.11,37
Length:	2.9 mm
Maximum Receive Delay:	0 ns
Peak Reflow Temperature (C):	260
Terminal Pitch:	.95 mm
Temperature Grade:	INDUSTRIAL
Power Supplies (V):	3.3

Category Top Products

ADM3485EARZ-REEL7

Analog Devices

ADM3485EARZ-REEL7 by Analog Devices is a Line Driver & Receiver with 3.6V max supply voltage, 35ns max transmit delay, and 1.5mA max supply current. Ideal for EIA-422/EIA-485 interface standard applications in industrial settings due to its BICMOS technology and differential Schmitt trigger input characteristics.

SP3485CN-L

Exar

Exar's SP3485CN-L is a BICMOS line transceiver with EIA-422/EIA-485 interface. It operates at 3.3V, has 8 terminals, and offers differential output. With a max transmit delay of 60ns, it suits applications requiring fast data transmission in commercial temperature range up to 70°C.

MAX3232CDW

Texas Instruments

MAX3232CDW by Texas Instruments is a Line Driver & Receiver with 16 terminals. It operates at 3.3/5V, has a max transmit delay of 300ns, and supports EIA-232-F, TIA-232-F, V.28 standards. Ideal for applications requiring reliable data transmission over short distances in commercial temperature environments.

LTC485CS8#PBF

Analog Devices

LTC485CS8#PBF by Analog Devices is a CMOS Line Transceiver with EIA-422 and EIA-485 interface standards. It operates at 4.75V to 5.25V, has a max transmit delay of 50ns, and offers differential outputs. Ideal for applications requiring fast data transmission over long distances in industrial settings.

ADM2485BRWZ-REEL7

Analog Devices

ADM2485BRWZ-REEL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at -40 to 85 °C. It has a max supply voltage of 5.5 V and differential output capability. Ideal for industrial applications requiring EIA-485-A, TIA-485-A, or ISO 8482E interface standards with a small outline package style.

ADM3485EARZ

Analog Devices

ADM3485EARZ by Analog Devices is a BICMOS line transceiver with EIA-422 and EIA-485 interface standards. It operates at 3.3V, has a max supply current of 1.5mA, and offers differential output. Ideal for industrial applications requiring reliable communication over long distances with low power consumption.

ADM2687EBRIZ

Analog Devices

ADM2687EBRIZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3-5.5V. It offers EIA-485-A, TIA-485-A, EIA-422, ISO 8482 interface standards and differential output. Ideal for industrial applications requiring fast data transmission with low delay of 100ns and high reliability in harsh environments up to 85°C.

SN65HVD08DR

Texas Instruments

SN65HVD08DR by Texas Instruments is a Line Driver & Receiver with 3.3/5 V power supplies, 40 ns max transmit delay, and EIA-485-A interface standard. Ideal for industrial applications requiring true output polarity, differential output, and dual terminal position in a small outline package style.

MAX3232IDBR

Texas Instruments

MAX3232IDBR by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at -40 to 85 °C. It has a max supply voltage of 3.6 V and peak reflow temperature of 260 C. Ideal for EIA-232-F, TIA-232-F, V.28 interfaces in industrial applications due to its inverted output polarity and Schmitt trigger input characteristics.

TRS3122ERGER

Texas Instruments

TRS3122ERGER by Texas Instruments is a Line Driver & Receiver with 2 functions. It operates b/w -40 to 85 °C, supporting EIA-232; TIA-232 interface standard. With a supply voltage range of 1.65V to 5.5V, it's ideal for industrial applications requiring SCHMITT TRIGGER input characteristics.

MAX3232IDWR

Texas Instruments

MAX3232IDWR by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at -40 to 85 °C. It has a max supply voltage of 3.6 V and transmit delay of 300 ns. Ideal for industrial applications requiring EIA-232-F, TIA-232-F, V.28 interface standard compatibility.

MAX3485EESA+

Analog Devices

MAX3485EESA+ by Analog Devices is a CMOS line driver with 1 function, operating at 3.3V. It offers EIA-422 and EIA-485 interface standards, with a max transmit delay of 35ns. Ideal for industrial applications requiring differential outputs in small outline packages.

MAX3483ESA+

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

LTC2870IFE#TRPBF

Linear Technology

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: HTSSOP; Package Shape: RECTANGULAR;

MAX232CPE

Rochester Electronics

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;

ST3232BDR

STMicroelectronics

ST3232BDR by STMicroelectronics is a Line Driver & Receiver with 16 terminals, operating at 3-5.5V. It has dual functions, Schmitt trigger input characteristics, and supports EIA-232, TIA-232 interfaces. Ideal for industrial applications requiring reliable data transmission in temperature range -40 to 85°C.

FIN1104MTC

Onsemi

FIN1104MTC by Onsemi is a Line Transceiver with 4-bit driver and receiver functions. It operates at 3.3V supply voltage, has a max transmit delay of 1.75ns, and supports EIA-644-A interface standard. Ideal for industrial applications requiring differential input characteristics in a compact package style with dual terminal position.

MAX3232ESE

Maxim Integrated

MAX3232ESE by Maxim Integrated is a Line Driver & Receiver with 3.3/5V power supplies, operating temperature of -40 to 85 °C. It has EIA-232 and EIA-562 interface standards, Schmitt trigger input characteristics, and inverted output polarity. Ideal for industrial applications requiring reliable communication over long distances.

SP3232EEN-L

Sipex

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

MAX202ECSE-T

Maxim Integrated

MAX202ECSE-T by Maxim Integrated is a Line Driver & Receiver with 5.5V max supply voltage, 2 functions, and 16 terminals. It operates b/w 0-70°C and has an inverted output polarity for EIA-232-E, TIA-232-E, V.28 interfaces. Ideal for commercial applications requiring CMOS technology and Schmitt trigger input characteristics.