Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

1211-40087

Manufacturer

Sv Microwave
Manufacturer's Part Number

1211-40087
Description

RF SMP CONNECTOR;
Datasheet

Datasheet

Not In Stock

Popular Products

LM358N

Harris Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

2N7002

Samsung

N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;

Details

2N2222A

Gec Plessey Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

1N4148WS

Vishay Intertechnology

Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.

Details

BSS138

Infineon Technologies

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;

Details

SS14

Microsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358DR2G

Onsemi

LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.

Details

BSS138LT1G

Onsemi

BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.

Details

FDN5618P

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;

Details

BSS138

Good-ark Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;

Details

OHN3140U

Tt Electronics Plc

OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.

Details

2N2222A

Surge Components

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;

Details

USB3320C-EZK-TR

Standard Microsystems

INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;

Details

SMBJ18CA

Jgd Semiconductors

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;

Details

NE555D

STMicroelectronics

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

LM2931AZ-5.0RAG

Onsemi

LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.

Details

LL4148

Changzhou Galaxy Century Microelectronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LM358N

Onsemi

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

LM555CM

National Semiconductor

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

2N2222A

Bytesonic Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;

Details

1211-40087 Technical Details

TYPE	DESCRIPTION
Connector Type:	RF SMP CONNECTOR

Category Top Products

302114

Amphenol

Amphenol 302114 RF SMP Connector features gold finish, 50 ohm impedance, and operates up to 26.5 GHz. Ideal for board mounting applications with male contact gender and jack body style. Made of beryllium copper shell material, it withstands temperatures from -65 to 165 °C.

85-3

Amphenol

The Amphenol 85-3 RF Connector is a panel mount jack with 0.8 dB insertion loss and gold termination. It has a max operating frequency of 11 GHz, ideal for applications requiring high-frequency signal transmission in temperatures ranging from -40 to 85°C. The connector features snap coupling, PTFE insulator material, and a characteristic impedance of 50 ohm.

SF1621-60048-1S

Sv Microwave

SF1621-60048-1S by Sv Microwave is a threaded RF connector with 50 ohm impedance, suitable for panel mount applications. Featuring polyetherimide insulator and stainless steel shell, it operates b/w -65 to 165 °C at frequencies up to 50 GHz. Ideal for board and panel mounting, this female jack connector has a 0.357" body depth.

966

Ntt

RF CONNECTOR; Manufacturer Series: 966;

7708-14

Winchester Interconnect

Winchester Interconnect's 7708-14 RF Connector features gold termination, snap coupling, and PTFE insulator. Ideal for 0.5 GHz applications with 75 ohm impedance, male contact gender, and crimp termination on cable mounting.

GRF1-J-P-04-E-ST-TH1

Samtec

Samtec's GRF1-J-P-04-E-ST-TH1 RF Connector features threaded coupling, 50 ohm impedance, and a max frequency of 6 GHz. Ideal for board mounting applications requiring a female jack connector with gold over nickel finish for solder termination.

R222.052.000

Radiall S A

Radiall S A R222.052.000 RF Connector features 0.13" body diameter, 0.759 dB insertion loss, and gold (Au) termination with Ni barrier. Ideal for 40 GHz applications with 50 ohm impedance, SNAP coupling, and solder termination for female connectors on cables. Operating range from -65 to 165 °C.

BJ3159AC-201

Vertiv

Other RF Connectors; Reliability: COMMERCIAL; Contact Gender: FEMALE; Manufacturer Series: BJ3159; Shell Material: BRASS; Shell Finish: NICKEL;

A-1JA

Amphenol

A-1JA RF connector by Amphenol features a body length of 0.102", insulation resistance of 500M ohm, and dielectric voltage withstand of 200VAC. Ideal for board mounting in commercial applications, this male jack connector has a characteristic impedance of 50 ohm and operates up to 6GHz frequency.

BJ77FL

Bel Fuse

BJ77FL RF TRB CONNECTOR by Bel Fuse features a 0.487" body depth, NICKEL shell finish, and BRASS shell material. Ideal for commercial applications up to 0.5 GHz frequency, it offers FEMALE contact gender with SOLDER termination for reliable performance in PANEL mounting setups.

R223435000

Radiall S A

R223435000 RF connector by Radiall S A features a low insertion loss of 0.42 dB and a VSWR of 1.08, suitable for applications up to 12.4 GHz. With a snap coupling type and solder termination, this male connector with 50 ohm impedance is ideal for board mounting in high-frequency RF systems.

HRMP-U.FLJ(40)

Hirose Electric

OTHER RF CONNECTOR; Reliability: COMMERCIAL; MIL Conformity: NO; DIN Conformance: NO; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e4;

96_MMPX-50-0-3/111_NM

Huber+suhner Ag

96_MMPX-50-0-3/111_NM by Huber+suhner Ag is a SNAP coupling type RF connector with characteristic impedance of 50 ohm. It has a max operating frequency of 67 GHz, making it suitable for high-frequency applications. With insulator material made of POLYTETRAFLUOROETHYLENE, this connector can operate in temperatures ranging from -65 to 155 °C.

R223435000W

Radiall S A

R223435000W by Radiall S A is an RF MMBX connector with a body depth of 0.35". Featuring SNAP coupling, it has a solder termination and male contact gender. Ideal for board mounting applications, this receptacle connector offers reliable performance in straight mounting style setups.

MS-156C3

Hirose Electric

The Hirose Electric MS-156C3 RF Connector is a threaded, 50 ohm receptacle with gold contact finish. With dimensions of 0.091" x 0.091" x 0.053", it operates up to 11 GHz and is ideal for surface mount applications on boards.

03S12L-000S3

Rosenberger Hochfrequenztechnik & Kg

Rosenberger Hochfrequenztechnik & Kg's 03S12L-000S3 RF Connector features threaded coupling, polystyrol insulator, and male contact gender. With a VSWR of 2.62, it operates up to 26.5 GHz, making it ideal for high-frequency applications in telecommunications and aerospace industries.

90002

Ddk

RF CONNECTOR; Manufacturer Series: Y92; Body or Shell Style: JACK; IEC Conformity: NO; MIL Conformity: NO; DIN Conformance: NO;

1211-40003

Sv Microwave

The SV Microwave 1211-40003 RF SMP Connector features a body diameter of 0.165", insertion loss of 0.154 dB, and dielectric withstanding voltage of 700VAC. Ideal for applications requiring a characteristic impedance of 50 ohm, such as high-frequency communication systems operating up to 26.5 GHz.

925-127P-51P

Amphenol

RF SMPM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;

20279-001E-01

I-pex

I-pex 20279-001E-01 RF Connector features GOLD OVER NICKEL termination, SNAP coupling, and LIQUID CRYSTAL POLYMER insulator. Ideal for board mounting in applications requiring high-quality male connectors with COPPER ALLOY contacts.