Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

302114

Manufacturer

Amphenol
Manufacturer's Part Number

302114
Description

RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Frequency: 26.5 GHz; Maximum Operating Temperature (Cel): 165; Body Depth: .183 inch;
Datasheet

Datasheet

Not In Stock

Popular Products

FDV304P

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;

Details

LM358N

Intersil

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

LM555CM

Intersil

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

LL4148

Vishay Intertechnology

Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.

Details

1N4148

Cheng-yi Electronic

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

M24308/2-1F

TE Connectivity

TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.

Details

1N4148WS

Yangzhou Yangjie Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM7805CT

National Semiconductor

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;

Details

OPA2277UA/2K5E4

Texas Instruments

OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.

Details

RC0603JR-070RL

Yageo

Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.

Details

SSL-LXA228SRC-TR11

Lumex

SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.

Details

2N2222A

Tesla Elektronicke Soucastky

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

BSS138PS,115

NXP Semiconductors

NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.

Details

2N2222A

Itt Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

BSS138-TP

Micro Commercial Components

BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.

Details

1N4148WS

Vishay Intertechnology

Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.

Details

M39029/56351

Souriau-sunbank Connection Technologies

Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.

Details

1N4148WT

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MBR130T1G

Onsemi

MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.

Details

2N2222A

Minilogic Device

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;

Details

302114 Technical Details

TYPE	DESCRIPTION
Mounting Style:	STRAIGHT
Other Names:	ACX2517
Mating Contact Finish:	GOLD
Panel Mount:	NO
Mounting Type:	BOARD
Shell Finish:	GOLD
JESD-609 Code:	e4
Body Depth:	.183 inch
Minimum Operating Temperature:	-65 Cel
Total No. of Contacts:	1
Coupling Type:	SNAP
Termination Type:	SOLDER
Maximum Operating Temperature (Cel):	165
Termination Contact Finish:	Gold (Au)
Contact Gender:	MALE
Body Diameter:	.163 inch
Characteristic Impedance:	50 ohm
Insulator Material:	POLYTETRAFLUOROETHYLENE
Connector Type:	RF SMP CONNECTOR
Contact Material:	BRASS
Option:	GENERAL PURPOSE
Maximum Operating Frequency:	26.5 GHz
Shell Material:	BERYLLIUM COPPER
Body or Shell Style:	JACK

Category Top Products

3211-60298

Sv Microwave

RF SMPM CONNECTOR;

142-1000-002

Vertiv

RF CONNECTOR; Option: HERMETIC; Contact Gender: MALE; Filter Feature: NO; Termination Contact Finish: GOLD (50) OVER NICKEL (5); IEC Conformity: NO;

20449-001E-03

I-pex

20449-001E-03 by I-pex is a SNAP RF MHF CONNECTOR for BOARD mounting with SURFACE MOUNT termination. It features MALE contact gender, RECEPTACLE body style, and STRAIGHT mounting style. Ideal for applications requiring reliable RF connections in compact electronic devices.

3221-40007

Sv Microwave

The SV Microwave 3221-40007 RF SMPM Connector has a characteristic impedance of 50 ohm, withstands up to 450VAC, and operates at frequencies up to 40 GHz. Ideal for applications requiring high durability, such as in aerospace and telecommunications industries.

73412-0114

Molex

Molex 73412-0114 RF Connector has a Voltage Standing Wave Ratio of 1.3, SNAP coupling type, and male contact gender. Ideal for surface mount board applications in various electronic devices.

82_MMBX-50-0-2/111_NE

Huber+suhner Ag

82_MMBX-50-0-2/111_NE RF connector by Huber+suhner Ag features a gold (Au) termination finish, liquid crystal polymer insulator, and 1.15 VSWR. With a max operating frequency of 12.4 GHz, it is ideal for board mounting applications requiring a durable female jack connector with 50 ohm impedance.

1086009-1

TE Connectivity

TE Connectivity's 1086009-1 RF Connector features 0.14 dB Insertion Loss, SNAP Coupling Type, and POLYPHENYLENE SULFIDE Insulator. With a max operating frequency of 6 GHz, it is ideal for board mounting applications requiring a 50 ohm characteristic impedance and female contact gender.

119S104-40ML5

Rosenberger Hochfrequenztechnik & Kg

The Rosenberger Hochfrequenztechnik & Kg 119S104-40ML5 RF SMP Connector features 0.09 dB insertion loss, threaded coupling type, and gold termination contact finish. With a max operating frequency of 10 GHz, it is ideal for applications requiring a 50 ohm characteristic impedance and surface mount termination on boards.

R222M80500

Radiall S A

R222M80500 by Radiall S A is a RF SMP CONNECTOR with a body length of 0.256 inch and body depth of 0.421 inch. It has an insertion loss of 0.16 dB and can operate at temperatures ranging from -55 to 165 °C. This connector is commonly used in applications requiring a 50 ohm characteristic impedance and a max operating frequency of 6 GHz.

M49142/03-0008

Winchester Interconnect

Winchester Interconnect's M49142/03-0008 RF TRB Connector features gold termination and mating contact finish, bayonet coupling type, and MIL conformity. Ideal for male cable mounting applications requiring a plug with straight mounting style.

272110

Amphenol

Amphenol 272110 RF connector features threaded coupling, PTFE insulator, and 50 ohm impedance. Ideal for applications requiring male plug connectors with silver finish over copper, suitable for cables with operating temperatures ranging from -65 to 165°C and frequencies up to 75 GHz.

CJT-T-P-GF-ST-TH1

Samtec

CJT-T-P-GF-ST-TH1 by Samtec is a RF connector with 0.185" body diameter, GOLD OVER NICKEL termination finish, and POLYTETRAFLUOROETHYLENE insulator. It has 100 ohm impedance, operates up to 4 GHz, and is ideal for board mounting in applications requiring polarized key and male contact gender.

925-123C-51A

Amphenol

RF SMPM CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;

119S141-40ML5

Rosenberger Hochfrequenztechnik & Kg

Rosenberger's 119S141-40ML5 RF SMP Connector features 0.09 dB insertion loss, SNAP coupling type, and PEEK/PTFE/LCP insulator. Ideal for board mounting in applications up to 10 GHz requiring a 50 ohm characteristic impedance.

R222.152.000

Radiall S A

R222.152.000 RF F CONNECTOR by Radiall S A features a 0.142" body diameter, 500VAC dielectric voltage, and 1.35 VSWR for applications up to 26.5 GHz. With gold-plated contacts, POLYTETRAFLUOROETHYLENE insulator, and durability of 500 cycles, it's ideal for commercial RF connectivity in temperatures ranging from -65 to 165 °C.

R285025401W

Radiall S A

RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Mating Contact Finish: NOT SPECIFIED; IEC Conformity: NO;

90003

Ddk

RF CONNECTOR; IEC Conformity: NO; Manufacturer Series: Y92; Body or Shell Style: PLUG; MIL Conformity: NO; DIN Conformance: NO;

CBJR70A

Cinch Connectivity Solutions

Other RF Connectors; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body Diameter: .38 inch; Mounting Option-1: LOCKING; Body or Shell Style: JACK;

15440

Corning Gilbert

RF CONNECTOR; Contact Gender: FEMALE; Filter Feature: NO; Additional Features: LOW PROFILE; IEC Conformity: NO; Termination Type: SOLDER;

RECE.20449.001E.01

Taoglas

Taoglas RECE.20449.001E.01 is a 50 ohm RF connector with gold finish, operating from -40 to 90°C, suitable for 6 GHz applications. It features SNAP coupling, FEMALE contact gender, and SURFACE MOUNT termination ideal for BOARD mounting in various RF systems.