Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

All prices are in USD

Bulk

QTY	Unit Price	Ext Price
1,818	$5.833	$10,604.394

L6201

Manufacturer

STMicroelectronics
Manufacturer's Part Number

L6201
Description

FULL BRIDGE BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
Datasheet

Datasheet

1818 In Stock

Popular Products

2N2222A

Electronic Transistors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

CSNF651

Honeywell Sensing And Control

CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.

Details

FT232RL-REEL

FTDI

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

Details

SS14

Changzhou Starsea Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ABS07-32.768KHZ-T

Abracon

Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.

Details

1N4148

Microsemi

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148WS

Vishay Intertechnology

Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.

Details

2N2222A

Good-ark Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;

Details

SMBJ18CA

Taiwan Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM317D2TG

Onsemi

LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.

Details

1N4148

Nte Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LL4148

Temic Semiconductors

RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

SMBJ18CA

Alpha & Omega Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SZNUP2105LT1G

Onsemi

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

Details

BAV99

Shanghai Lunsure Electronic Technology

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM317LMX/NOPB

Texas Instruments

LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.

Details

FDD5614P

Onsemi

FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.

Details

OPA2227UA

Texas Instruments

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

Details

2N7002

Infineon Technologies

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;

Details

LM7805CT/NOPB

Texas Instruments

LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.

Details

L6201 Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	12 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	36 V
Output Characteristics:	TOTEM-POLE
Maximum Time At Peak Reflow Temperature (s):	30
Maximum Seated Height:	2.65 mm
Surface Mount:	YES
Terminal Finish:	Nickel/Palladium/Gold (Ni/Pd/Au)
No. of Terminals:	20
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
Technology:	BCDMOS
JESD-30 Code:	R-PDSO-G20
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Built-in Protections:	TRANSIENT; THERMAL
Package Code:	SOP
Interface IC Type:	FULL BRIDGE BASED PERIPHERAL DRIVER
Width:	7.5 mm
Moisture Sensitivity Level (MSL):	3
Other Names:	497-1418-5-NDR 497-1418-5
Output Polarity:	TRUE
Input Characteristics:	STANDARD
Maximum Supply Voltage:	48 V
Nominal Output Peak Current Limit:	5 A
JESD-609 Code:	e4
No. of Functions:	1
Qualification:	Not Qualified
Output Current Flow Direction:	SOURCE AND SINK
Length:	12.8 mm
Peak Reflow Temperature (C):	260
Terminal Pitch:	1.27 mm

Category Top Products

ULN2003LVDR

Texas Instruments

ULN2003LVDR by Texas Instruments is a 7-bit buffer/inverter-based peripheral driver with a nominal output peak current limit of 1A. It operates b/w -40 to 85°C, featuring open-collector output polarity and built-in transient protections. Ideal for applications requiring sink current flow direction in compact spaces due to its small outline package style.

DML3006LFDS-7

Diodes Incorporated

DML3006LFDS-7 by Diodes Inc. is a Peripheral Driver with 8 terminals, operating voltage range of 0.5V to 13.5V, and built-in protections for transient, over current, thermal & under voltage issues. It has a small outline package style suitable for industrial applications requiring a buffer or inverter based peripheral driver with sink output current flow direction.

TPS22916CLYFPR

Texas Instruments

TPS22916CLYFPR by Texas Instruments is a peripheral driver with max supply voltage of 5.5V, min supply voltage of 1V, and operating temp range from -40 to 85°C. It features built-in transient protections and is ideal for industrial applications requiring buffer or inverter based peripheral drivers.

VNQ660SP-E

STMicroelectronics

STMicroelectronics' VNQ660SP-E is a MOS technology peripheral driver with 6A output current, suitable for 6-24V power supplies. It features a small outline package with 10 terminals in gull wing form, ideal for surface mount applications.

ADUM7234BRZ

Analog Devices

ADUM7234BRZ by Analog Devices is a half bridge based peripheral driver with 16 terminals. It operates b/w -40 to 105 °C and supports a max supply voltage of 18 V. With turn-on/off time of 0.2 us, it's ideal for industrial applications requiring source/sink output current flow control.

ITS4060SSJNXUMA1

Infineon Technologies

ITS4060SSJNXUMA1 by Infineon is a Peripheral Driver with 8 terminals, operating at -40 to 125 °C. It offers built-in protections for transient, over current, and over voltage situations. Ideal for automotive applications due to its CMOS technology and source output current flow direction.

TPS1HB08AQPWPRQ1

Texas Instruments

TPS1HB08AQPWPRQ1 by Texas Instruments is a high-side driver with built-in protections for transient, over current, thermal, and under voltage. It operates b/w -40 to 125 °C and has a max supply voltage of 18 V. Ideal for automotive applications due to AEC-Q100 screening level.

VNQ5E160KTR-E

STMicroelectronics

STMicroelectronics' VNQ5E160KTR-E is a full bridge peripheral driver with 4 bits. It has built-in protections for transient, over current, thermal, and under voltage. With a max supply voltage of 28V, it's ideal for applications requiring high power supplies and source output current flow direction.

IMP803LG

Daily Silver Imp Microelectronics

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

NCP45520IMNTWG-L

Onsemi

NCP45520IMNTWG-L by Onsemi is a peripheral driver with 8 terminals, operating voltage range of 0.5V to 13.5V, and built-in protections for transient, over current, thermal, and under voltage conditions. It has a small outline package style with very thin profile suitable for industrial applications requiring sink output current flow direction at temperatures ranging from -40°C to 85°C.

IRS2184STRPBF

Infineon Technologies

IRS2184STRPBF by Infineon Technologies is a peripheral driver with 8 terminals and built-in transient & under voltage protections. It operates b/w -40 to 125 °C, with turn-on time of 0.9 us and turn-off time of 0.4 us. Ideal for automotive applications due to its CMOS technology and half bridge based interface IC type.

TPIC6B595DW

Texas Instruments

TPIC6B595DW by Texas Instruments is an 8-bit register-based peripheral driver with sink output current flow direction. It operates b/w -40 to 125 °C and has a max supply voltage of 5.5 V, making it suitable for automotive applications requiring transient protection and standard input characteristics.

DRV8846RGET

Texas Instruments

Texas Instruments DRV8846RGET is a 24-terminal peripheral driver with built-in protections for transient, over current, thermal, and under voltage. It operates in industrial temperature range (-40 to 85°C) with a max output current of 2A. Ideal for applications requiring source and sink output current flow direction in a compact chip carrier package.

VN808CMTR-E

STMicroelectronics

STMicroelectronics' VN808CMTR-E is a peripheral driver with 8 functions, operating at supply voltages b/w 10.5V to 32V. With built-in protections against transient, over current, and over voltage, it's ideal for automotive applications requiring a max output current of 0.7A. The small outline package style with gull wing terminals makes it suitable for surface mount installations in tight spaces.

IR2085STRPBF

International Rectifier

HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

ISO1H811GAUMA1

Infineon Technologies

ISO1H811GAUMA1 by Infineon Technologies is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates at a max supply voltage of 5.5V and has a max output current of 0.625A. This interface IC type is ideal for applications requiring buffer or inverter based peripheral drivers in compact designs.

L293DD

STMicroelectronics

L293DD by STMicroelectronics is a peripheral driver with 2 functions, 20 terminals, and a max supply voltage of 36V. It features built-in thermal protection and offers true output polarity. Ideal for applications requiring source and sink current flow control in compact designs.

L293DN

Texas Instruments

L293DN by Texas Instruments is a peripheral driver with 2 functions, operating at 5V nominal voltage. It offers built-in transient and thermal protections, supporting a max supply voltage of 36V. Ideal for applications requiring source and sink output current flow direction in commercial temperature grade environments.

L293NE

Texas Instruments

L293NE by Texas Instruments is a peripheral driver with 2 functions, operating at 4.5-36V. It offers built-in transient and thermal protections, with a max output current of 2A. Ideal for applications requiring true output polarity control in commercial temperature environments.

BTS70041EPPXUMA1

Infineon Technologies

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Moisture Sensitivity Level (MSL): 2A; Terminal Finish: TIN; JESD-609 Code: e3;