Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

ULN2003LVDR

Manufacturer

Texas Instruments
Manufacturer's Part Number

ULN2003LVDR
Description

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Output Characteristics: OPEN-COLLECTOR;
Datasheet

Datasheet

Not In Stock

Popular Products

2N2222A

Microsemi

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;

Details

SMBJ18CA

Telefunken Microelectronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M39029/58-360

Itt Cannon

CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;

Details

DS18B20U+

Analog Devices

DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.

Details

2N2222A

Crystalonics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

LM555CM

Intersil

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

1N4148

Texas Instruments

1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.

Details

M39029/58360

Esterline Technologies

CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;

Details

261

Deltrol Controls

Other Relays;

Details

BSS138

General Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;

Details

FDV303N

Onsemi

FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.

Details

LM7805CT

Silicon Group

Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;

Details

2N2222A

General Diode

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

1N4148

Excel (Suzhou) Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148

Synsemi

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

87832-1420

Molex

87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.

Details

LM317T

Motorola

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;

Details

LL4148

Taitron Components

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

SS14

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Vishay Intertechnology

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

ULN2003LVDR Technical Details

TYPE	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	50 V
Output Characteristics:	OPEN-COLLECTOR
Maximum Time At Peak Reflow Temperature (s):	30
Maximum Seated Height:	1.75 mm
Surface Mount:	YES
Terminal Finish:	MATTE TIN
No. of Terminals:	16
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
Technology:	BIPOLAR
JESD-30 Code:	R-PDSO-G16
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Built-in Protections:	TRANSIENT
Maximum Operating Temperature:	85 Cel
Package Code:	SOP
Interface IC Type:	BUFFER OR INVERTER BASED PERIPHERAL DRIVER
Width:	3.9 mm
Moisture Sensitivity Level (MSL):	1
Output Polarity:	INVERTED
Input Characteristics:	STANDARD
Driver No. of Bits:	7
Nominal Output Peak Current Limit:	1 A
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Package Equivalence Code:	SOP16,.25
Output Current Flow Direction:	SINK
Length:	9.9 mm
Peak Reflow Temperature (C):	260
Terminal Pitch:	1.27 mm

Category Top Products

VNI4140K

STMicroelectronics

VNI4140K by STMicroelectronics is a 24V peripheral driver with 4 functions, built-in protections, and 1.3A output current limit. It comes in a small outline package with gull wing terminals for sink flow direction applications. Ideal for driving various peripherals in electronic systems requiring reliable protection and control features.

TPS22965DSGR

Texas Instruments

TPS22965DSGR by Texas Instruments is a Peripheral Driver with 8 terminals, operating b/w -40 to 105 °C. It has a supply voltage range of 2.5V to 5.7V and built-in transient protection. Ideal for industrial applications requiring source/sink current flow control in compact designs.

VN5E160ASTR-E

STMicroelectronics

VN5E160ASTR-E by STMicroelectronics is a peripheral driver with a max supply voltage of 28V and a max output current of 1A. It is commonly used as a buffer or inverter based peripheral driver for various applications.

VN808-E

STMicroelectronics

VN808-E by STMicroelectronics is a peripheral driver with 8 functions and a max output current of 0.5A. It has built-in protections for transient, over current, thermal, and under voltage conditions. This IC is commonly used as a buffer or inverter based peripheral driver in various applications.

VNB14NV04-E

STMicroelectronics

VNB14NV04-E by STMicroelectronics is a peripheral driver with built-in protections against transient, over current, over voltage, and thermal issues. It has a max seated height of 4.826 mm and a width of 9.15 mm. This IC type is commonly used as a buffer or inverter based peripheral driver for various applications.

BTS441TGNTMA1

Infineon Technologies

BTS441TGNTMA1 by Infineon is a 4-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates at supply voltages ranging from 4.75V to 43V, with a nominal output peak current limit of 21A. This small outline package IC is ideal for applications requiring sink output current flow direction and turn-on/off times of 200us/250us.

IPS2050HQ-32

STMicroelectronics

BUFFER OR INVERTER BASED PERIPHERAL DRIVER;

ULN-2065B

Vishay Sprague

Vishay Sprague's ULN-2065B is a 16-terminal peripheral driver with 4 functions. It features open-collector output, transient protection, and operates b/w -20°C to 85°C. Ideal for applications requiring buffer or inverter-based interface ICs with sink current flow direction.

L6201PS

STMicroelectronics

L6201PS by STMicroelectronics is a full bridge peripheral driver with 5A output current limit, suitable for applications requiring source and sink flow direction. It operates at supply voltages ranging from 12V to 48V, featuring built-in thermal protection. The small outline package with gull wing terminals makes it ideal for compact designs in various electronic systems.

IR25600SPBF

Infineon Technologies

IR25600SPBF by Infineon is a CMOS half bridge peripheral driver with 8 terminals, operating at -40 to 125 °C. It has a supply voltage of 15V and is designed for automotive applications due to its moisture sensitivity level of 2.

ADUM7234BRZ

Analog Devices

ADUM7234BRZ by Analog Devices is a half bridge based peripheral driver with 16 terminals. It operates b/w -40 to 105 °C and supports a max supply voltage of 18 V. With turn-on/off time of 0.2 us, it's ideal for industrial applications requiring source/sink output current flow control.

DML3006LFDS-7

Diodes Incorporated

DML3006LFDS-7 by Diodes Inc. is a Peripheral Driver with 8 terminals, operating voltage range of 0.5V to 13.5V, and built-in protections for transient, over current, thermal & under voltage issues. It has a small outline package style suitable for industrial applications requiring a buffer or inverter based peripheral driver with sink output current flow direction.

UDN2987LWTR

Allegro MicroSystems

Allegro MicroSystems' UDN2987LWTR is a Peripheral Driver with 8 functions, 35V max supply voltage, and 0.5A output peak current limit. Ideal for applications requiring source flow direction, such as motor control systems. Features built-in protections against transient events, overcurrent, and thermal issues.

VND14NV04-E

STMicroelectronics

VND14NV04-E by STMicroelectronics is a Peripheral Driver with built-in protections for transient, over current, and over voltage. It has 2 terminals in a small outline package style with Gull Wing terminal form. Ideal for applications requiring an interface IC type of buffer or inverter based peripheral driver.

BSP75NTA

Zetex Plc

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Code: SOP; Package Shape: RECTANGULAR; Turn-off Time: 20 us;

FPF2702MPX

Onsemi

FPF2702MPX by Onsemi is a peripheral driver with a supply voltage range of 2.8-36V, built-in protections for over current, thermal, and under voltage. It features 8 terminals in a small outline package suitable for industrial applications requiring source output current flow direction.

ULN2003ADR2G

Onsemi

ULN2003ADR2G by Onsemi is a 16-terminal peripheral driver with open-collector output polarity. It operates b/w -20 to 85°C, suitable for various applications requiring inverted output characteristics and sink current flow direction. This small outline package IC is ideal for buffer or inverter-based interface designs at a nominal voltage of 50V.

VND10N06TR-E

STMicroelectronics

VND10N06TR-E by STMicroelectronics is a small outline peripheral driver with built-in protections for transient, over current, and over voltage. It has a nominal output peak current limit of 10A and turn-on time of 1.8us. Ideal for applications requiring sink output current flow direction in compact spaces.

ISO8200BTR

STMicroelectronics

ISO8200BTR by STMicroelectronics is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w -40 to 125 °C and has a max supply voltage of 36 V. This automotive-grade IC features a turn-on time of 22 us and nominal output peak current limit of 1.1 A, making it ideal for buffer or inverter-based applications in the automotive industry.

TDE1798DP

STMicroelectronics

TDE1798DP by STMicroelectronics is a peripheral driver with 8 terminals and built-in protections for over current and thermal issues. It operates b/w -25 to 85 °C with a supply voltage range of 6-35 V, providing a max output current of 0.5 A. Ideal for applications requiring buffer or inverter based peripheral drivers with source flow direction.