Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

ULN2004AD16-U

Manufacturer

Diodes Incorporated
Manufacturer's Part Number

ULN2004AD16-U
Description

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Terminal Pitch: 2.54 mm;
Datasheet

Datasheet

Not In Stock

Popular Products

1N4148

Renesas Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM358M

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

LM317T

Integrated Power Semiconductors

Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;

Details

2N2222A

International Devices

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

2N7002

Sinyork

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;

Details

SMBJ18CA

Multicomp Pro

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;

Details

M39029/56-351

Glenair

CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;

Details

1N4148WS

Tak Cheong Electronics Holdings

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM555CM

Texas Instruments

LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.

Details

CRG0805F10R

TE Connectivity

TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.

Details

LL4148

Leshan Radio

RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;

Details

LM358MX

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

BAV99

Jiangsu Changjiang Electronics Technology

RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;

Details

CRGCQ0805F10R

TE Connectivity

TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.

Details

LL4148

Weitronic Enterprise

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BSS138

Panjit International

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;

Details

L78L05ABZ-AP

STMicroelectronics

L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.

Details

2N7002

Fairchild Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;

Details

2N7002

Samsung

N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;

Details

1N4148WT

Changzhou Galaxy Century Microelectronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ULN2004AD16-U Technical Details

TYPE	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Output Characteristics:	OPEN-COLLECTOR
Maximum Seated Height:	4 mm
Surface Mount:	NO
Maximum Supply Current:	1.35 mA
Terminal Finish:	MATTE TIN
No. of Terminals:	16
Terminal Position:	DUAL
Package Style (Meter):	IN-LINE
JESD-30 Code:	R-PDIP-T16
Package Shape:	RECTANGULAR
Terminal Form:	THROUGH-HOLE
Built-in Protections:	TRANSIENT
Maximum Operating Temperature:	105 Cel
Package Code:	DIP
Interface IC Type:	BUFFER OR INVERTER BASED PERIPHERAL DRIVER
Width:	7.62 mm
Turn-off Time:	10 us
Other Names:	ULN2004AD16-UDI
Driver No. of Bits:	7
Maximum Supply Voltage:	13 V
Turn-on Time:	10 us
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Package Equivalence Code:	DIP16,.3
Output Current Flow Direction:	SINK
Length:	19.1 mm
Peak Reflow Temperature (C):	260
Terminal Pitch:	2.54 mm

Category Top Products

ULN2003D

STMicroelectronics

ULN2003D by STMicroelectronics is a 7-bit peripheral driver with inverted output polarity. It operates b/w -40 to 85°C, with a max supply voltage of 50V. Suitable for applications requiring open-collector outputs and transient protection.

LMG1020YFFT

Texas Instruments

LMG1020YFFT by Texas Instruments is a peripheral driver with 6 terminals, operating voltage range of 4.75V to 5.25V, and max output current of 7A. It features built-in thermal and under voltage protections, making it suitable for automotive applications requiring fast turn-on/off times and source/sink current flow direction control.

BTS640S2GATMA1

Infineon Technologies

BTS640S2GATMA1 by Infineon is a MOS technology peripheral driver with 6 terminals. It offers built-in protections for over current, over voltage, thermal, and under voltage. With a max supply voltage of 34V and nominal output peak current limit of 19A, it's ideal for applications requiring buffer or inverter based peripheral drivers.

TPS22925CYPHR

Texas Instruments

TPS22925CYPHR by Texas Instruments is a peripheral driver with 6 terminals, operating voltage range of 0.65V to 3.6V, and built-in transient protection. It features a compact rectangular package style with very thin profile and fine pitch, suitable for industrial applications requiring source and sink current flow control.

VN751STR

STMicroelectronics

VN751STR by STMicroelectronics is a peripheral driver with a max supply voltage of 36V and built-in transient protections. It operates in automotive-grade temperatures, has a nominal output peak current limit of 2.7A, and is ideal for buffer or inverter-based applications requiring a source flow direction.

ULN2003A

Diodes Incorporated

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Driver No. of Bits: 7;

BTS3408GXUMA1

Infineon Technologies

BTS3408GXUMA1 by Infineon is a MOS peripheral driver with 60V max supply voltage, 0.55A output current limit, and 8us turn-on/off time. It's used for buffering or inverting signals in various applications requiring overcurrent, overvoltage, transient, and thermal protections.

NUD3160DMT1G

Onsemi

NUD3160DMT1G by Onsemi is a Peripheral Driver with 2 functions, operating at -40 to 125 °C. It has a max supply voltage of 60 V and output current of 0.15 A. Ideal for automotive applications requiring BUFFER OR INVERTER BASED PERIPHERAL DRIVER interface ICs.

MIC5842YN

Micrel

SIPO BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;

FSFR2100XSL

Onsemi

FSFR2100XSL by Onsemi is a half bridge based peripheral driver with 9 terminals in a rectangular package. It offers over current, over voltage, and thermal protections. Ideal for applications requiring source and sink output current flow direction control.

AD5749ACPZ

Analog Devices

AD5749ACPZ by Analog Devices is a peripheral driver with 32 terminals, operating voltage range of 2.7-55V, and max supply current of 6.2mA. It has a square package shape and is suitable for industrial applications requiring buffer or inverter-based interface ICs with source current flow direction.

ULN2003ADR2G

Rochester Electronics

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Output Polarity: INVERTED;

TPS22919DCKT

Texas Instruments

TPS22919DCKT by Texas Instruments is a peripheral driver with 6 terminals, operating voltage range of 1.6V to 5.5V, and output current limit of 3A. It offers built-in protections against transient events, overcurrent, and thermal issues. Ideal for industrial applications requiring a compact thin profile package with sink flow direction.

L9958XP

STMicroelectronics

L9958XP by STMicroelectronics is a 24-terminal peripheral driver in a small outline package with gull wing terminals. It operates at a peak reflow temperature of 260°C for up to 30 seconds and features FB-based PWM control. Ideal for applications requiring source and sink current flow direction, such as automotive systems.

L298P013TR

STMicroelectronics

L298P013TR by STMicroelectronics is a full bridge peripheral driver with 2 functions, operating at a supply voltage range of 4.5V to 46V. It offers built-in protections against over current and thermal issues, making it ideal for applications requiring source and sink output current flow direction in a small outline package style.

FPF2109

Fairchild Semiconductor

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;

ULN-2068B

Sprague Electric

Peripheral Drivers; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;

BSP75NHUMA1

Infineon Technologies

BSP75NHUMA1 by Infineon Technologies is a small outline peripheral driver with built-in protections for transient, over current, and over voltage. It operates at 12V nominal voltage with a 0.7A output peak current limit. Ideal for applications requiring sink output current flow direction and fast turn-on/off times of 20us.

TPS22810DBVT

Texas Instruments

TPS22810DBVT by Texas Instruments is a 6-terminal peripheral driver with max supply voltage of 18V and output current of 2A. It operates in industrial temperature range, offers transient protection, and suits buffer or inverter-based applications. The small outline package is ideal for space-constrained designs.

MDC3105DMT1G

Onsemi

MDC3105DMT1G by Onsemi is a peripheral driver with 6 terminals, operating at -40 to 85°C. It has a max output current of 0.25A and built-in transient protection, suitable for industrial applications requiring a 5V supply voltage and sink output current flow direction.