Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

MIC2981/82YWM-TR

Manufacturer

Micrel
Manufacturer's Part Number

MIC2981/82YWM-TR
Description

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

MMBT2907ALT1G

Rochester Electronics

PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;

Details

LM555CMX

National Semiconductor

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

ULN2803A

Rochester Electronics

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;

Details

MC33269T-3.3G

Onsemi

MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.

Details

1N5819HW-7-F

SPC TECHNOLOGY/ MULTICOMP

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Taiwan Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Tak Cheong Electronics Holdings

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

AB26TRB-32.768KHZ--T

Abracon

AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.

Details

ATMEGA328P-AU

Atmel

MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;

Details

2N7002,215

NXP Semiconductors

2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.

Details

1N4148WT

Onsemi

1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.

Details

C1206C104K5RACTU

KEMET Corporation

KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.

Details

NE555D

Philips Semiconductors

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

1N4148

First Components International

RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;

Details

LM555CM

Harris Semiconductor

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

2N2222A

Microchip Technology

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;

Details

43025-0400

Molex

The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.

Details

NC7WZ07P6X

Onsemi

The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.

Details

LM555CM

Fairchild Semiconductor

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

BAV99

Motorola

RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;

Details

MIC2981/82YWM-TR Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	5 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	35 V
Maximum Time At Peak Reflow Temperature (s):	40
Maximum Seated Height:	2.616 mm
Surface Mount:	YES
Terminal Finish:	MATTE TIN
No. of Terminals:	18
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
Technology:	BIPOLAR
JESD-30 Code:	R-PDSO-G18
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Built-in Protections:	TRANSIENT
Maximum Operating Temperature:	85 Cel
Package Code:	SOP
Interface IC Type:	BUFFER OR INVERTER BASED PERIPHERAL DRIVER
Width:	7.6 mm
Turn-off Time:	10 us
Moisture Sensitivity Level (MSL):	2
Other Names:	MIC2981/82YWM-DKR MIC2981/82YWMTR-ND MIC2981/82YWM TR-ND MIC2981/82YWMTR MIC2981/82YWM-CT MIC2981/82YWM TR
Maximum Supply Voltage:	50 V
Turn-on Time:	2 us
Nominal Output Peak Current Limit:	.35 A
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
No. of Functions:	8
Output Current Flow Direction:	SOURCE
Length:	11.608 mm
Peak Reflow Temperature (C):	260
Terminal Pitch:	1.27 mm
Temperature Grade:	INDUSTRIAL

Category Top Products

ULN2003APWRE4

Texas Instruments

ULN2003APWRE4 by Texas Instruments is a 7-bit buffer/inverter peripheral driver with 16 terminals. It features open-collector output, transient protection, and sink current flow direction. This bipolar technology IC is ideal for applications requiring inverted output polarity in a small outline package.

VNQ5E160KTR-E

STMicroelectronics

STMicroelectronics' VNQ5E160KTR-E is a full bridge peripheral driver with 4 bits. It has built-in protections for transient, over current, thermal, and under voltage. With a max supply voltage of 28V, it's ideal for applications requiring high power supplies and source output current flow direction.

BTS711L1XUMA1

Infineon Technologies

BTS711L1XUMA1 by Infineon is a MOS technology peripheral driver with 4 functions, 20 terminals, and built-in protections. It operates at supply voltages b/w 5V to 34V and has a nominal output peak current limit of 4.4A. This small outline package is ideal for applications requiring source and sink output current flow direction control.

BTS711L1

Infineon Technologies

BTS711L1 by Infineon Technologies is a peripheral driver with a max supply voltage of 34V. It has built-in protections for transient, over current, over voltage, thermal, and under voltage conditions. This small outline MOS technology driver is commonly used as a buffer or inverter based peripheral driver in various applications.

DRV104PWP

Texas Instruments

DRV104PWP by Texas Instruments is a PWM-based peripheral driver with a max supply voltage of 32V and built-in protections for overcurrent and thermal issues. This small outline, heat sink package is ideal for industrial applications requiring a max output current of 1.2A in a compact form factor.

BTS70021EPPXUMA1

Infineon Technologies

BTS70021EPPXUMA1 by Infineon is a peripheral driver with 14 terminals, offering built-in protections against over/under voltage and thermal issues. It operates at supply voltages ranging from 6V to 18V, making it suitable for automotive applications requiring a nominal output peak current limit of 2.1A. The compact rectangular package style with gull wing terminal form ensures efficient heat dissipation in space-constrained environments.

L9958SB

STMicroelectronics

L9958SB by STMicroelectronics is a FB-based peripheral driver with PWM, offering source and sink output current flow direction. With 16 terminals in a small outline package, it features matte tin terminal finish and gull wing form. Ideal for applications requiring precise motor control in automotive systems.

ISP742RIFUMA1

Infineon Technologies

ISP742RIFUMA1 by Infineon Technologies is a Peripheral Driver with 8 terminals, operating at -30 to 85 °C. It offers built-in protections for over current, over voltage, and thermal issues. This small outline package has a max supply voltage of 34 V and sink output current flow direction, suitable for buffer or inverter-based interface IC applications.

TPS27S100BPWPR

Texas Instruments

TPS27S100BPWPR by Texas Instruments is a peripheral driver with a max supply voltage of 40V and built-in protections for transient, over current, thermal, and under voltage. It operates in automotive temperature grades from -40 to 125°C and has a nominal output peak current limit of 7A. Ideal for high side driver applications with sink output current flow direction.

BTS442E2BKSA1

Infineon Technologies

BTS442E2BKSA1 by Infineon is a MOS peripheral driver with 5 terminals, 42V max supply voltage, and built-in protections. It has a turn-on time of 350us and nominal output peak current limit of 70A. Ideal for applications requiring source flow direction control in automotive systems.

ITS4090QEPDXUMA1

Infineon Technologies

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Finish: TIN; Moisture Sensitivity Level (MSL): 2A; JESD-609 Code: e3;

VNB14N04

STMicroelectronics

VNB14N04 by STMicroelectronics is a MOS technology peripheral driver with built-in protections for transient, over current, and thermal issues. It features an open-drain output polarity with a nominal output peak current limit of 14A. This small outline package is ideal for applications requiring buffer or inverter based interface ICs.

ULN2004A

Vishay Intertechnology

Vishay Intertechnology's ULN2004A is a 7-bit buffer/inverter peripheral driver with open-collector output and sink current flow direction. It operates at -20 to 85°C, with a max supply voltage of 8V and max supply current of 1.45mA. Ideal for applications requiring transient protection in compact spaces due to its small form factor (19.3mm x 7.62mm x 5.08mm).

MIC2545A-1YM

Micrel

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

BTS142DATMA1

Infineon Technologies

BTS142DATMA1 by Infineon Technologies is a MOS technology peripheral driver with built-in protections for transient, over current, over voltage, and thermal issues. It has a nominal voltage of 12V and a nominal output peak current limit of 45A. This small outline package driver is ideal for applications requiring sink output current flow direction.

VN800S-E

STMicroelectronics

STMicroelectronics' VN800S-E is a peripheral driver with 8-36V power supplies, built-in protections, and source output current flow. Its compact rectangular package is ideal for applications requiring transient, over current, over voltage, thermal, and under voltage protection in various electronic systems.

VN820B5-E

STMicroelectronics

STMicroelectronics' VN820B5-E is a MOS technology-based peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates within a power supply range of 8-36V and can handle a max output current of 9A. This small outline package is ideal for buffer or inverter applications requiring a source flow direction.

ULN2803ADWR

Texas Instruments

ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.

ITS5215LCUMA1

Infineon Technologies

ITS5215LCUMA1 by Infineon is a peripheral driver with 12 terminals, built-in protections for over/under voltage and current, and thermal protection. It operates b/w -30 to 85 °C with a supply voltage range of 5.5-40 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink output current flow direction.

MIC5841YWM-TR

Micrel

SIPO BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR;