Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

MIC5841YWM-TR

Manufacturer

Micrel
Manufacturer's Part Number

MIC5841YWM-TR
Description

SIPO BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

SS14

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ABS10-32.768KHZ-T

Abracon

Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.

Details

LM358N

Silicon Group

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Daco Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ULN2803A

Allegro MicroSystems

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;

Details

LM107H/883C

National Semiconductor

LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.

Details

MS3V-T1R32.768KHZ+/-20PPM12.5PF

Golledge Electronics

MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.

Details

SMBJ18CA

Semtech

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Terry Semiconductor

RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;

Details

LL4148

International Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BAV99

Lite-on Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

261

New England Microwave

Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;

Details

1N4148

Continental Device India

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BAV99

Meritek Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Laube Technology

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

NE555D

Philips Semiconductors

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

2N2222A

General Transistor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

2N7002

Changzhou Galaxy Century Microelectronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;

Details

2N7002

Samsung

N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;

Details

SS14

Surge Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MIC5841YWM-TR Technical Details

TYPE	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	5 V
Maximum Time At Peak Reflow Temperature (s):	NOT SPECIFIED
Maximum Seated Height:	2.65 mm
Surface Mount:	YES
No. of Terminals:	18
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
Technology:	BICMOS
JESD-30 Code:	R-PDSO-G18
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Built-in Protections:	TRANSIENT
Maximum Operating Temperature:	85 Cel
Package Code:	SOP
Interface IC Type:	SIPO BASED PERIPHERAL DRIVER
Width:	7.5 mm
Maximum Supply Voltage:	12 V
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Qualification:	Not Qualified
Output Current Flow Direction:	SINK
Length:	11.55 mm
Peak Reflow Temperature (C):	NOT SPECIFIED
Terminal Pitch:	1.27 mm
Temperature Grade:	INDUSTRIAL

Category Top Products

TPS27S100APWPR

Texas Instruments

TPS27S100APWPR by Texas Instruments is a peripheral driver with a max supply voltage of 40V and built-in protections for transient, over current, thermal, and under voltage. It has 14 terminals in a small outline package style suitable for automotive applications. The device offers a nominal output peak current limit of 7A with sink flow direction.

ULN2004A

Vishay Intertechnology

Vishay Intertechnology's ULN2004A is a 7-bit buffer/inverter peripheral driver with open-collector output and sink current flow direction. It operates at -20 to 85°C, with a max supply voltage of 8V and max supply current of 1.45mA. Ideal for applications requiring transient protection in compact spaces due to its small form factor (19.3mm x 7.62mm x 5.08mm).

BTT60502ERAXUMA1

Infineon Technologies

BTT60502ERAXUMA1 by Infineon Technologies is a Peripheral Driver with 2 functions, operating at 5-36 V. It offers built-in protections against transient, over current, and over voltage. This small outline driver is ideal for automotive applications requiring a nominal output peak current limit of 3 A.

ITS4200SMENHUMA1

Infineon Technologies

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Finish: TIN; Moisture Sensitivity Level (MSL): 3; JESD-609 Code: e3;

ULN2803

First Components International

Peripheral Drivers; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;

VN920SO-E

STMicroelectronics

STMicroelectronics' VN920SO-E is a 16-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates on power supplies ranging from 8V to 36V and has a max output current of 10A. Ideal for applications requiring buffer or inverter-based interface ICs with a source flow direction.

BSP75NXT

Infineon Technologies

BSP75NXT by Infineon Technologies is a small outline peripheral driver with built-in protections for transient, over current, and over voltage. It operates at 12V nominal voltage with a 0.7A output peak current limit. Ideal for applications requiring sink output current flow direction and fast turn-on/off times of 20us.

FPF2116

Fairchild Semiconductor

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;

LTC4376HDHD#TRPBF

Analog Devices

LTC4376HDHD#TRPBF by Analog Devices is a 16-terminal peripheral driver with built-in transient protection. It operates b/w -40 to 125 °C, with a supply voltage range of 4-40 V. Ideal for automotive applications, it features a small outline package and 0.5 mm terminal pitch for efficient performance.

FPF2107

Fairchild Semiconductor

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;

BTS721L1XUMA1

Infineon Technologies

BTS721L1XUMA1 by Infineon is a peripheral driver with 4 functions, MOS technology, and 20 terminals. It offers built-in protections for transient, over current, over voltage, thermal, and under voltage scenarios. This small outline package is ideal for applications requiring a nominal voltage of 12V and a max output peak current limit of 9.8A.

ST890CDR

STMicroelectronics

ST890CDR by STMicroelectronics is a peripheral driver with 8 terminals, operating voltage range of 2.7-5.5V, and max output current of 1.2A. It features built-in protections against overcurrent and thermal issues, suitable for industrial applications requiring buffer or inverter-based interface ICs with fast turn-on/off times.

FPF2125

Fairchild Semiconductor

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;

ITS428L2

Infineon Technologies

ITS428L2 by Infineon is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w -30 to 85°C with a supply voltage range of 4.75V to 43V. This small outline IC is ideal for buffer or inverter-based applications requiring a peak output current limit of 1.8A.

FDC6330L

Onsemi

FDC6330L by Onsemi is a CMOS technology peripheral driver with 6 terminals and built-in transient protection. It operates b/w -55 to 150 °C, with a max output current of 2.3 A. Ideal for military-grade applications requiring a small outline, low profile package style.

MAX4820EUP-T

Maxim Integrated

MAX4820EUP-T by Maxim Integrated is a Peripheral Driver with 8-bit driver, 0.15A output current, and 0.07A peak current limit. It operates at -40 to 85°C and has built-in transient protection. Ideal for industrial applications requiring buffer or inverter-based peripheral drivers.

ULN2003APWRE4

Texas Instruments

ULN2003APWRE4 by Texas Instruments is a 7-bit buffer/inverter peripheral driver with 16 terminals. It features open-collector output, transient protection, and sink current flow direction. This bipolar technology IC is ideal for applications requiring inverted output polarity in a small outline package.

VNI4140KTR-32

STMicroelectronics

VNI4140KTR-32 by STMicroelectronics is a 24V peripheral driver with 4 bits, suitable for BUFFER OR INVERTER BASED applications. It features a small outline package with dual terminals and matte tin finish. The device has a peak reflow temperature of 260°C and moisture sensitivity level of MSL3.

TPS1HB08AQPWPRQ1

Texas Instruments

TPS1HB08AQPWPRQ1 by Texas Instruments is a high-side driver with built-in protections for transient, over current, thermal, and under voltage. It operates b/w -40 to 125 °C and has a max supply voltage of 18 V. Ideal for automotive applications due to AEC-Q100 screening level.

VN751STR

STMicroelectronics

VN751STR by STMicroelectronics is a peripheral driver with a max supply voltage of 36V and built-in transient protections. It operates in automotive-grade temperatures, has a nominal output peak current limit of 2.7A, and is ideal for buffer or inverter-based applications requiring a source flow direction.