Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

AUIPS7081RTRL

Manufacturer

Infineon Technologies
Manufacturer's Part Number

AUIPS7081RTRL
Description

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Shape: RECTANGULAR; Turn-off Time: 50 us; Package Body Material: PLASTIC/EPOXY;
Datasheet

Datasheet

Not In Stock

Popular Products

1N4148

Microsemi

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

M39029/56-351

Amphenol

CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;

Details

SMBJ18CA

Bourns

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Bkc Semiconductors

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148WS

Sensitron Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Formosa Microsemi

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

INA826AIDGKR

Texas Instruments

INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.

Details

M39029/56-351

Itt Cannon

CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;

Details

LM358M

Onsemi

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

2N7002

Sipex

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;

Details

1N4148

ROHM

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BAV99

Secos

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS123-7-F

Diodes Incorporated

BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.

Details

LL4148

TDK

RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;

Details

LM555CMX

Texas Instruments

LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.

Details

2902037

Phoenix Contact

MODULAR TERMINAL BLOCK;

Details

2N7002,215

NXP Semiconductors

2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.

Details

ULN2803ADWR

Texas Instruments

ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.

Details

1N4148

Texas Instruments

1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.

Details

BSS138

General Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;

Details

AUIPS7081RTRL Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	6 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	14 V
Maximum Seated Height:	2.39 mm
Maximum Output Current:	2.3 A
Sub-Category:	Peripheral Drivers
Surface Mount:	YES
No. of Terminals:	4
Terminal Position:	SINGLE
Package Style (Meter):	SMALL OUTLINE, HEAT SINK/SLUG
Screening Level:	AEC-Q100
JESD-30 Code:	R-PSSO-G4
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Built-in Protections:	TRANSIENT; OVER CURRENT; THERMAL
Interface IC Type:	BUFFER OR INVERTER BASED PERIPHERAL DRIVER
Width:	6.095 mm
Turn-off Time:	50 us
Moisture Sensitivity Level (MSL):	1
Driver No. of Bits:	1
Maximum Supply Voltage:	35 V
Turn-on Time:	45 us
No. of Functions:	1
Qualification:	Not Qualified
Package Equivalence Code:	SMSIP5H,.39,44TB
Output Current Flow Direction:	SINK
Length:	6.54 mm
Terminal Pitch:	1.14 mm
Power Supplies (V):	14

Category Top Products

VND830SPTR-E

STMicroelectronics

VND830SPTR-E by STMicroelectronics is a peripheral driver with 2 functions, 6A max output current, and built-in protections. It operates on power supplies ranging from 8V to 36V and is ideal for buffer or inverter-based interface IC applications requiring source flow direction.

NCV8461DR2G

Onsemi

NCV8461DR2G by Onsemi is a peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates at a max supply voltage of 34V and has a max output current of 2A. This interface IC type is ideal for applications requiring sink output current flow direction in automotive electronics.

ULN2003APWRE4

Texas Instruments

ULN2003APWRE4 by Texas Instruments is a 7-bit buffer/inverter peripheral driver with 16 terminals. It features open-collector output, transient protection, and sink current flow direction. This bipolar technology IC is ideal for applications requiring inverted output polarity in a small outline package.

VNI2140J

STMicroelectronics

VNI2140J by STMicroelectronics is a peripheral driver with 36V max supply voltage, 125°C max operating temp, and 0.5A max output current. Ideal for automotive applications, it offers built-in protections against transient events and thermal issues. Package style: small outline, heat sink/slug, low profile.

BTS70081EPPXUMA1

Infineon Technologies

BTS70081EPPXUMA1 by Infineon is a peripheral driver with 14 terminals, built-in protections for transient, over current, and over voltage. It operates at supply voltages b/w 6-18V and has a nominal output peak current limit of 11A. Ideal for automotive applications due to AEC-Q100 screening level compliance.

BSP772TXUMA1

Infineon Technologies

BSP772TXUMA1 by Infineon: Peripheral driver with 8 terminals, MOS tech, 34V max supply voltage. Ideal for industrial applications requiring transient, over/under voltage protection. Small outline package, sink output current flow direction, and 17A nominal output peak current limit.

ADP195ACPZ-R7

Analog Devices

ADP195ACPZ-R7 by Analog Devices is a peripheral driver with 6 terminals, operating voltage range of 1.1V to 3.6V, and industrial temperature grade up to 85°C. It features a small outline package style suitable for buffer or inverter-based applications requiring source current flow direction. The device is designed for surface mount assembly with a compact square shape and very thin profile, making it ideal for space-constrained electronic designs.

HCPL-316J

Agilent Technologies

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

ITS428L2XT

Infineon Technologies

ITS428L2XT by Infineon Technologies is a peripheral driver with a max supply voltage of 43V. It offers built-in protections for transient, over current, over voltage, thermal, and under voltage conditions. This small outline package is suitable for applications requiring buffer or inverter based interface ICs with a nominal output peak current limit of 1.8A.

TPS22965TDSGRQ1

Texas Instruments

TPS22965TDSGRQ1 by Texas Instruments is an 8-terminal peripheral driver with a supply voltage range of 2.5V to 5.5V and operating temperature from -40°C to 105°C. It features built-in transient protection, no-lead terminal form, and source/sink current flow direction. Ideal for industrial applications requiring buffer or inverter-based interface ICs in compact spaces due to its small outline package style.

L9958SB

STMicroelectronics

L9958SB by STMicroelectronics is a FB-based peripheral driver with PWM, offering source and sink output current flow direction. With 16 terminals in a small outline package, it features matte tin terminal finish and gull wing form. Ideal for applications requiring precise motor control in automotive systems.

ULN2003V12PWR

Texas Instruments

ULN2003V12PWR by Texas Instruments is a 7-bit peripheral driver with a nominal output peak current limit of 1A. It features built-in transient protections and operates b/w -40°C to 125°C. Ideal for applications requiring inverted output polarity and sink current flow direction in a small outline, thin profile package.

FPF2101

Fairchild Semiconductor

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;

FPF2110

Fairchild Semiconductor

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;

L293DWP

Unitrode

HALF BRIDGE BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 28; Package Shape: RECTANGULAR; No. of Functions: 2; Built-in Protections: THERMAL;

VNH5180ATR-E

STMicroelectronics

VNH5180ATR-E by STMicroelectronics is a HALF BRIDGE BASED PERIPHERAL DRIVER with Matte Tin finish. It has a max reflow temp of 260°C and MSL level of 3. Ideal for applications requiring SINK output current flow direction in SMALL OUTLINE package.

VN750SMPTR-E

STMicroelectronics

STMicroelectronics' VN750SMPTR-E is a peripheral driver with 8-36V power supplies, 2A max output current, and built-in protections. Ideal for applications requiring source flow direction, it features a small outline package style and turn-on/off times of 40/30us.

ISP452XT

Infineon Technologies

ISP452XT by Infineon Technologies is a peripheral driver with a max supply voltage of 34V and built-in transient protection. It operates b/w -30°C to 85°C, suitable for various applications requiring a small outline package style. With a nominal output peak current limit of 0.7A, it serves as an interface IC type buffer or inverter-based peripheral driver.

DS2482X-100+T

Analog Devices

DS2482X-100+T by Analog Devices is a peripheral driver with 9 terminals, operating voltage range of 2.9V to 5.5V, and built-in overcurrent protection. It features a compact rectangular package style suitable for industrial applications requiring source output current flow direction.

VN920-B5

STMicroelectronics

STMicroelectronics' VN920-B5 is a MOS technology-based peripheral driver with 4 terminals and built-in protections. It operates at supply voltages ranging from 5.5V to 36V, providing a max output current of 10A for applications requiring sink flow direction control. The small outline package with heat sink/slug makes it suitable for various automotive and industrial uses.