Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

MIC5842YN

Manufacturer

Microchip Technology
Manufacturer's Part Number

MIC5842YN
Description

SIPO BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

1N4148

Rugao Dachang Electronic

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N2222A

New Jersey Semiconductor Products

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;

Details

LM358AN

Texas Instruments

LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.

Details

ULN2803A

STMicroelectronics

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;

Details

2N2222A

Semicoa

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

LM358D-T

NXP Semiconductors

LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.

Details

CRG0805F10R

TE Connectivity

TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.

Details

SS14

Promax-johnton

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

CRCW080510R0FKEA

Vishay Intertechnology

Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.

Details

2N2222A

STMicroelectronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;

Details

1N4148

Grande Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

CC0603KRX7R9BB104

Yageo

Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.

Details

M39029/56-351

Carlisle Interconnect Technologies

CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;

Details

M39029/56351

Esterline Technologies

CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;

Details

BAV99-7-F

Diodes Incorporated

Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.

Details

BSS138LT1G

Onsemi

BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.

Details

1N4148

Baneasa S A

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

FDN306P

Onsemi

FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.

Details

SS14

Hy Electronic

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

EU2B-YS2J03C

Idec

ROTARY SWITCH;

Details

MIC5842YN Technical Details

TYPE	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	5 V
Maximum Seated Height:	3.937 mm
Surface Mount:	NO
Maximum Supply Current:	16 mA
Terminal Finish:	MATTE TIN
No. of Terminals:	18
Terminal Position:	DUAL
Package Style (Meter):	IN-LINE
Technology:	BICMOS
JESD-30 Code:	R-PDIP-T18
Package Shape:	RECTANGULAR
Terminal Form:	THROUGH-HOLE
Built-in Protections:	TRANSIENT
Maximum Operating Temperature:	85 Cel
Package Code:	DIP
Interface IC Type:	SIPO BASED PERIPHERAL DRIVER
Width:	7.62 mm
Output Polarity:	INVERTED
Input Characteristics:	STANDARD
Driver No. of Bits:	8
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Qualification:	Not Qualified
Package Equivalence Code:	DIP18,.3
Output Current Flow Direction:	SINK
Terminal Pitch:	2.54 mm
Temperature Grade:	INDUSTRIAL

Category Top Products

BTM7740GXUMA1

Infineon Technologies

Infineon's BTM7740GXUMA1 is a 28-terminal peripheral driver with a peak current limit of 15A. It features Gull Wing terminals, suitable for surface mount applications. This buffer/inverter-based driver supports bidirectional current flow and is ideal for various electronic systems requiring high output currents.

VNQ7003SYTR

STMicroelectronics

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;

DRV103H/2K5

Texas Instruments

DRV103H/2K5 by Texas Instruments is a peripheral driver with a max supply voltage of 32V and built-in protections against transient, over current, and thermal issues. It is commonly used as a buffer or inverter based peripheral driver for industrial applications.

MAX4820EUP+

Analog Devices

MAX4820EUP+ by Analog Devices is an 8-bit peripheral driver with a supply voltage range of 2.3V to 5.5V, operating temperature from -40°C to 85°C, and turn-on/off time of 1µs. It features open-drain output characteristics and is ideal for industrial applications requiring buffer or inverter-based peripheral drivers in a compact small outline package.

ULN2003A

Sgs-ates Componenti Electronici S P A

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; JESD-609 Code: e0;

ADUM3223BRZ-RL7

Analog Devices

ADUM3223BRZ-RL7 by Analog Devices is a peripheral driver with 2 functions, operating voltage range of 3V to 5.5V, and built-in thermal and under voltage protections. It is used in automotive applications due to its small outline package style and gull wing terminal form for reliable performance in harsh environments.

BTS72004EPAXUMA1

Infineon Technologies

BTS72004EPAXUMA1 by Infineon Technologies is a peripheral driver with a max supply voltage of 18V. It offers built-in protections against transient, over current, over voltage, and thermal issues. This compact driver, with dimensions of 4.9mm x 3.9mm x 1.15mm, is suitable for applications requiring true output polarity and a max output current of 0.004A.

A2982SLW-T

Allegro MicroSystems

Allegro MicroSystems' A2982SLW-T is a peripheral driver with 8 functions, operating voltage range of 5-50V, and max output current of 0.35A. Ideal for applications requiring transient protection, it features a small outline package style and Gull Wing terminal form.

ISP772TFUMA1

Infineon Technologies

ISP772TFUMA1 by Infineon Technologies is a Peripheral Driver with 8 terminals, offering built-in protections against transient, over current, and over voltage. It operates b/w -30 to 85 °C with a supply voltage range of 5-34 V. Ideal for applications requiring buffer or inverter based peripheral drivers.

BTS432E2BKSA1

Infineon Technologies

BTS432E2BKSA1 by Infineon is a MOS peripheral driver with 5 terminals and built-in protections. It operates at supply voltages b/w 4.5V to 42V, providing a nominal output peak current limit of 44A. This rectangular package is ideal for applications requiring buffer or inverter-based interface ICs with source current flow direction.

VN5E160STR-E

STMicroelectronics

STMicroelectronics' VN5E160STR-E is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates within a supply voltage range of 4.5V to 28V and has a compact rectangular package style suitable for various applications requiring source output current flow direction.

VN5016AJTR-E

STMicroelectronics

VN5016AJTR-E by STMicroelectronics is a peripheral driver with 36V max supply voltage, 4.5V min supply voltage, and built-in protections for various faults. It is used as a buffer or inverter-based peripheral driver in applications requiring a source output current flow direction.

VN750PS-E

STMicroelectronics

VN750PS-E by STMicroelectronics is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates within a supply voltage range of 5.5V to 36V and can handle a max output current of 2A. This small outline package is ideal for applications requiring source output current flow direction and quick turn-on/off times.

BTS4141N

Infineon Technologies

BTS4141N by Infineon is a MOS technology-based peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates at supply voltages ranging from 12V to 24V and has a max supply voltage of 45V. With a small outline package style suitable for automotive applications, it offers a nominal output peak current limit of 1.8A.

BTS3205NHUSA1/SAMPLE

Infineon Technologies

BUFFER OR INVERTER BASED PERIPHERAL DRIVER;

LMD18201T/NOPB

Texas Instruments

LMD18201T/NOPB by Texas Instruments is a BCDMOS peripheral driver with PWM, offering 6A output current and 55V max supply voltage. Ideal for automotive applications, it features built-in protections against transient, over current, thermal, and under voltage conditions. With a temperature range of -40 to 125 °C, this rectangular package with flange mount style has 11 terminals in zig-zag position.

VNQ7050AJTR-E

STMicroelectronics

STMicroelectronics VNQ7050AJTR-E is a 16-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates at supply voltages ranging from 4V to 28V and has a turn-on time of 120us. Ideal for applications requiring sink output current flow direction in compact spaces.

BTS409L1E3062ABUMA1

Infineon Technologies

BTS409L1E3062ABUMA1 by Infineon is a 6-terminal peripheral driver with built-in protections. It operates at a supply voltage range of 5-34 V and has a nominal output peak current limit of 7.5 A. Widely used in applications requiring source flow direction, such as automotive systems for efficient power management.

E-TDE1707BFP

STMicroelectronics

E-TDE1707BFP by STMicroelectronics is a Peripheral Driver with 8 terminals, operating voltage range of 6-48V, and built-in protections against transient, over current, and thermal issues. It is a small outline package suitable for commercial extended temperature applications requiring buffer or inverter based peripheral drivers with source and sink output current flow direction.

VN800S-E

STMicroelectronics

STMicroelectronics' VN800S-E is a peripheral driver with 8-36V power supplies, built-in protections, and source output current flow. Its compact rectangular package is ideal for applications requiring transient, over current, over voltage, thermal, and under voltage protection in various electronic systems.