Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

All prices are in USD

Bulk

QTY	Unit Price	Ext Price
2,743	$0.950	$2,605.850

FAN7391MX

Manufacturer

Fairchild Semiconductor
Manufacturer's Part Number

FAN7391MX
Description

HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

2743 In Stock

Popular Products

BAV99W-7-F

Diodes Incorporated

Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.

Details

BSS138LT3G

Onsemi

BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.

Details

LM358N

Fairchild Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Continental Device India

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Yangzhou Yangjie Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;

Details

LM358M

Texas Instruments

LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.

Details

USB3320C-EZK-TR

Microchip Technology

Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.

Details

LM107H/883

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;

Details

M39029/58-360

Itt Cannon

CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;

Details

B340A-13-F

Diodes Incorporated

B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.

Details

M85049/85-08W02

TE Connectivity

CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;

Details

BSS138

Good-ark Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;

Details

SS14

SPC TECHNOLOGY/ MULTICOMP

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

North American Philips Discrete Products Div

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

FSMLF327

Fox Electronics

FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.

Details

LL4148

TDK

RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;

Details

1N4148

Temic Semiconductors

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

CL31B104KBCNNNC

Samsung Electro-mechanics

Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.

Details

M24308/2-1F

Souriau-sunbank Connection Technologies

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;

Details

LM2931AZ-5.0RAG

Onsemi

LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.

Details

FAN7391MX Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	10 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	15 V
Maximum Time At Peak Reflow Temperature (s):	30
Maximum Seated Height:	1.75 mm
Sub-Category:	MOSFET Drivers
Surface Mount:	YES
Terminal Finish:	NICKEL PALLADIUM GOLD
No. of Terminals:	14
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
JESD-30 Code:	R-PDSO-G14
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Built-in Protections:	TRANSIENT; UNDER VOLTAGE
Maximum Operating Temperature:	125 Cel
Package Code:	SOP
Interface IC Type:	HALF BRIDGE BASED PERIPHERAL DRIVER
Width:	3.9 mm
Turn-off Time:	.045 us
Moisture Sensitivity Level (MSL):	1
Other Names:	FAN7391MXTR FAN7391MXCT FAN7391MXDKR ONSONSFAN7391MX 2832-FAN7391MXTR 2156-FAN7391MX-OS
Maximum Supply Voltage:	20 V
Turn-on Time:	.05 us
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Qualification:	Not Qualified
Output Current Flow Direction:	SOURCE AND SINK
Length:	8.625 mm
Peak Reflow Temperature (C):	260
Terminal Pitch:	1.27 mm
Temperature Grade:	AUTOMOTIVE
Power Supplies (V):	15

Category Top Products

BTS3134NHUMA1

Infineon Technologies

BTS3134NHUMA1 by Infineon is a MOS technology peripheral driver with built-in protections for transient, over current, and over voltage. It has 4 terminals in a small outline package style, with a nominal voltage of 12V and output peak current limit of 24A. Ideal for applications requiring sink output current flow direction and fast turn-on/off times of 100 us.

ITS42K5DLDFXUMA1

Infineon Technologies

ITS42K5DLDFXUMA1 by Infineon: Peripheral driver with 10 terminals, 42V max supply voltage, and built-in protections. Ideal for automotive applications due to -40 to 125 °C operating temp range. Features 0.4A output peak current limit and 0.5mm terminal pitch for efficient performance.

ULN2003D1013TR

STMicroelectronics

STMicroelectronics ULN2003D1013TR is a 7-bit buffer/inverter peripheral driver with max supply voltage of 3V. It features open-collector output, transient protection, and sink current flow direction. Ideal for applications requiring fast turn-on/off times in a small outline package.

LM3526MX-H/NOPB

National Semiconductor

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

MAX845ESA

Maxim Integrated

MAX845ESA by Maxim Integrated is a peripheral driver with 8 terminals, operating voltage range of 4.5V to 5.5V, and industrial temperature grade. It features a small outline package style suitable for buffer or inverter-based applications. With source and sink output current flow direction, it is ideal for various industrial electronic systems.

BTS443P

Infineon Technologies

BTS443P by Infineon Technologies is a MOS technology peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates at supply voltages ranging from 5V to 12V and has a max output peak current limit of 7.6A. This small outline package is ideal for automotive applications requiring reliable power management solutions.

UDN2987LWTR-6-T

Allegro MicroSystems

Allegro MicroSystems' UDN2987LWTR-6-T is a peripheral driver with 8 functions, -500A max output current, and 35V max supply voltage. Ideal for applications requiring open-emitter output characteristics, it offers built-in protections against transient events, overcurrent, and thermal issues. This small outline package IC operates b/w -20°C to 85°C temperature range.

AUIPS7081RTRL

Infineon Technologies

AUIPS7081RTRL by Infineon Technologies is a peripheral driver with 35V max supply voltage, 2.3A max output current, and AEC-Q100 screening level. It offers built-in protections for transient, over current, and thermal issues. Ideal for automotive applications requiring reliable power supplies in a compact package style.

L293NE

Texas Instruments

L293NE by Texas Instruments is a peripheral driver with 2 functions, operating at 4.5-36V. It offers built-in transient and thermal protections, with a max output current of 2A. Ideal for applications requiring true output polarity control in commercial temperature environments.

ULN2003A

Motorola

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDIP-T16;

VNQ7003SYTR

STMicroelectronics

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;

TBD62083APG

Toshiba

Toshiba TBD62083APG is an 8-bit BUFFER/INVERTER BASED PERIPHERAL DRIVER with a max output current of 0.4A. It operates in industrial temperature range (-40 to 85°C) and supports a supply voltage range from 2.5V to 25V. Ideal for applications requiring high-current sinking capabilities in various electronic systems.

L293DN

Unitrode

HALF BRIDGE BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Shape: RECTANGULAR; Maximum Supply Voltage: 36 V; Output Current Flow Direction: SOURCE AND SINK;

IRS2304STRPBF

International Rectifier

HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SSOP; Package Shape: RECTANGULAR;

TPS27SA08CPWPR

Texas Instruments

TPS27SA08CPWPR by Texas Instruments is a peripheral driver with a max supply voltage of 36V and built-in protections for transient, over current, thermal, and under voltage. It has a high side driver feature, output polarity is true, and can handle a max output current of 10A. This automotive-grade IC is ideal for applications requiring reliable control of high-side loads in harsh environments.

BTS441RGNTMA1

Infineon Technologies

BTS441RGNTMA1 by Infineon Technologies is a peripheral driver with a max supply voltage of 43V and built-in protections for transient, over current, and over voltage. It has a nominal output peak current limit of 21A and is used as a buffer or inverter based peripheral driver in various applications requiring precise control of high currents.

VNI2140J

STMicroelectronics

VNI2140J by STMicroelectronics is a peripheral driver with 36V max supply voltage, 125°C max operating temp, and 0.5A max output current. Ideal for automotive applications, it offers built-in protections against transient events and thermal issues. Package style: small outline, heat sink/slug, low profile.

MAX845ESA-T

Maxim Integrated

MAX845ESA-T by Maxim Integrated is an 8-terminal peripheral driver with a supply voltage range of 4.5V to 5.5V, suitable for industrial applications. It features a peak current limit of 1A, Gull Wing terminal form, and operates in temperatures from -40°C to 85°C. Ideal for buffer or inverter-based systems requiring source and sink output current flow control.

BTS6143DXT

Infineon Technologies

BTS6143DXT by Infineon Technologies is a MOS technology peripheral driver with 4 terminals, offering built-in protections for transient, over current, and over voltage. It operates at supply voltages ranging from 5.5V to 38V and has a nominal output peak current limit of 8A. Ideal for applications requiring sink output current flow direction and a turn-on/off time of 500µs.

L293DWPG4

Texas Instruments

L293DWPG4 by Texas Instruments is a peripheral driver with a max supply voltage of 7V. It has 2 functions and built-in protections for transient and thermal issues. This IC type is commonly used as a half bridge-based peripheral driver for various applications.