Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

All prices are in USD

Bulk

QTY	Unit Price	Ext Price
1,171	$3.030	$3,548.716

L293B

Manufacturer

STMicroelectronics
Manufacturer's Part Number

L293B
Description

HALF BRIDGE BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Input Characteristics: STANDARD;
Datasheet

Datasheet

1171 In Stock

Popular Products

1N4148WT

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Telcom Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

1N4148WT

Good-ark Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM317AEMP/NOPB

National Semiconductor

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;

Details

ATMEGA328P-AU

Atmel

MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;

Details

SMBJ18CA

Micro Commercial Components

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

DS18B20Z+T&R

Analog Devices

DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.

Details

LL4148

General Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LM2675M-ADJ/NOPB

Texas Instruments

LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.

Details

LM7805CT

Texas Instruments

LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.

Details

LM358N

Fairchild Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

LL4148

Surge Components

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

SS14+

Multicomp Pro

SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.

Details

KSZ9031RNXIC

Microchip Technology

KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.

Details

1N4148

International Components

RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;

Details

LM7805CT

Onsemi

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;

Details

LM317BD2TG

Onsemi

LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.

Details

2N7002

Changzhou Galaxy Century Microelectronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;

Details

CL10B104KB8NNNC

Samsung Electro-mechanics

CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.

Details

LL4148

Promax-johnton

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

L293B Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	4.5 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	5 V
Output Characteristics:	3-STATE
Maximum Seated Height:	5.1 mm
Surface Mount:	NO
Maximum Supply Current:	60 mA
Terminal Finish:	MATTE TIN
No. of Terminals:	16
Terminal Position:	DUAL
Package Style (Meter):	IN-LINE
Technology:	BIPOLAR
JESD-30 Code:	R-PDIP-T16
Package Shape:	RECTANGULAR
Terminal Form:	THROUGH-HOLE
Built-in Protections:	OVER CURRENT; THERMAL
Package Code:	DIP
Interface IC Type:	HALF BRIDGE BASED PERIPHERAL DRIVER
Width:	7.62 mm
Output Polarity:	TRUE
Input Characteristics:	STANDARD
Maximum Supply Voltage:	36 V
Nominal Output Peak Current Limit:	2 A
JESD-609 Code:	e3
No. of Functions:	2
Qualification:	Not Qualified
Output Current Flow Direction:	SOURCE AND SINK
Terminal Pitch:	2.54 mm

Category Top Products

ISO8200B

STMicroelectronics

ISO8200B by STMicroelectronics is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w -40 to 125 °C with a supply voltage range of 10.5-36 V, making it suitable for automotive applications requiring a nominal output peak current limit of 1.1 A.

BSP742T

Infineon Technologies

BSP742T by Infineon Technologies is a peripheral driver with a max supply voltage of 34V. It has built-in protections for transient, over current, over voltage, thermal, and under voltage conditions. This small outline MOS technology driver is commonly used as a buffer or inverter based peripheral driver in various applications.

TLE6220GPAUMA2

Infineon Technologies

TLE6220GPAUMA2 by Infineon is a 20-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates at a supply voltage range of 4.5V to 5.5V and has a nominal output peak current limit of 4.5A. This small outline IC is commonly used as a buffer or inverter based peripheral driver in various electronic applications.

VND7020AJTR-E

STMicroelectronics

VND7020AJTR-E by STMicroelectronics is a 16-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates at supply voltages ranging from 4V to 28V and has a turn-on time of 120us. This rectangular package is ideal for applications requiring sink output current flow direction in a compact form factor.

BSP752RXUMA2/SAMPLE

Infineon Technologies

BUFFER OR INVERTER BASED PERIPHERAL DRIVER;

ITS4141NXT

Infineon Technologies

ITS4141NXT by Infineon Technologies is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w -30 to 85 °C with a supply voltage range of 12-45 V. This MOS technology-based device has a turn-on time of 100 us and output current flow direction is sink.

IRS2113STRPBF

International Rectifier

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

ULN2065B

STMicroelectronics

ULN2065B by STMicroelectronics is a 16-terminal peripheral driver with 4 functions. It features built-in transient protection and operates in an industrial temperature range from -20°C to 85°C. This rectangular package with through-hole terminals is ideal for applications requiring true output polarity and fast turn-on/off times of 1 us and 1.5 us, respectively.

MIC5841YN

Micrel

SIPO BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;

DS2482S-800

Maxim Integrated

DS2482S-800 by Maxim Integrated is a peripheral driver with 8 functions, operating voltage range of 2.9V to 5.5V, and industrial temperature grade. It is used as a buffer or inverter based peripheral driver in various applications requiring source current flow direction control.

E-L6201PS

STMicroelectronics

STMicroelectronics E-L6201PS is a full bridge peripheral driver with 20 terminals. It operates at a nominal voltage of 36V and can handle a max supply voltage of 48V. With built-in thermal protection, it is suitable for various applications requiring source and sink output current flow direction.

ULN2003AS16-13

Diodes Incorporated

ULN2003AS16-13 by Diodes Inc. is a peripheral driver with 1 function and 16 terminals. It has a max supply voltage of 13V and can operate at temperatures ranging from -40 to 105°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.

FPF2125

Fairchild Semiconductor

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;

BTS141TCBUMA1

Infineon Technologies

BTS141TCBUMA1 by Infineon Technologies is a peripheral driver with built-in protections for transient, over current, and over voltage. It has a nominal output peak current limit of 35A and turn-on time of 40us. This small outline package driver is ideal for applications requiring sink output current flow direction.

LTC4376HDHD#PBF

Analog Devices

LTC4376HDHD#PBF by Analog Devices is a Peripheral Driver with 16 terminals, operating voltage range of 4-40V, and built-in transient protection. It features a small outline package style suitable for automotive applications. This CMOS technology-based IC has a turn-off time of 0.5us and is ideal for buffer or inverter based peripheral driver interfaces.

A2982SLW-T

Allegro MicroSystems

Allegro MicroSystems' A2982SLW-T is a peripheral driver with 8 functions, operating voltage range of 5-50V, and max output current of 0.35A. Ideal for applications requiring transient protection, it features a small outline package style and Gull Wing terminal form.

BSP762TXT

Infineon Technologies

BSP762TXT by Infineon Technologies is a peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates at a nominal voltage of 13.5 V and has a max output peak current limit of 2.4 A. This small outline package driver is ideal for applications requiring sink output current flow direction in MOS technology environments.

MIC2981/82YWM

Microchip Technology

MIC2981/82YWM by Microchip Technology is an 8-function peripheral driver with a max supply voltage of 50V. It features built-in transient protections and operates in industrial temperature grades. This small outline package driver has a turn-on time of 2us and turn-off time of 10us, making it ideal for various applications requiring source current flow direction.

MAX4820EUP+

Analog Devices

MAX4820EUP+ by Analog Devices is an 8-bit peripheral driver with a supply voltage range of 2.3V to 5.5V, operating temperature from -40°C to 85°C, and turn-on/off time of 1µs. It features open-drain output characteristics and is ideal for industrial applications requiring buffer or inverter-based peripheral drivers in a compact small outline package.

BTS70041EPPXUMA1

Infineon Technologies

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Moisture Sensitivity Level (MSL): 2A; Terminal Finish: TIN; JESD-609 Code: e3;