Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

All prices are in USD

Bulk

QTY	Unit Price	Ext Price
357	$0.998	$356.108

IRS21844SPBF

Manufacturer

Infineon Technologies
Manufacturer's Part Number

IRS21844SPBF
Description

HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

357 In Stock

Popular Products

2N7002

Promax-johnton

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;

Details

AB26TRB-32.768KHZ--T

Abracon

AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.

Details

BAV99

Lite-on Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Vicor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148

Sinyork

RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;

Details

LM555CM

Texas Instruments

LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.

Details

BSS138

General Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;

Details

LM358M

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

BAV99

Weitron Technology

RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;

Details

SS14

Micro Commercial Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138BKW,115

Nexperia

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;

Details

1N4148WS

Rectron

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FDV304P

Onsemi

The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.

Details

2N2222A

Space Power Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

BAV99

Rfe International

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MBRS340T3G

Onsemi

MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.

Details

BSS138

Fairchild Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;

Details

STM8S003F3P6TR

STMicroelectronics

STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.

Details

1N4148WT

Taitron Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

PAP-06V-S

J S T Mfg

PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.

Details

IRS21844SPBF Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	10 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	15 V
Maximum Time At Peak Reflow Temperature (s):	30
Maximum Seated Height:	1.75 mm
Sub-Category:	MOSFET Drivers
Surface Mount:	YES
Terminal Finish:	MATTE TIN
No. of Terminals:	14
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
Technology:	CMOS
JESD-30 Code:	R-PDSO-G14
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Built-in Protections:	TRANSIENT; UNDER VOLTAGE
Maximum Operating Temperature:	125 Cel
Package Code:	SOP
Interface IC Type:	HALF BRIDGE BASED PERIPHERAL DRIVER
Width:	3.9 mm
Turn-off Time:	.4 us
Moisture Sensitivity Level (MSL):	2
Maximum Supply Voltage:	20 V
Turn-on Time:	.9 us
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Qualification:	Not Qualified
Package Equivalence Code:	SOP14,.25
Output Current Flow Direction:	SOURCE AND SINK
Length:	8.65 mm
Peak Reflow Temperature (C):	260
Terminal Pitch:	1.27 mm
Temperature Grade:	AUTOMOTIVE
Power Supplies (V):	15

Category Top Products

IRS2186STRPBF

Infineon Technologies

IRS2186STRPBF by Infineon Technologies is a peripheral driver with a max supply voltage of 20V. It is used in automotive applications and offers built-in protections against transients and under voltage. Its turn-on and turn-off time is 0.25us, making it suitable for fast switching operations.

TPS22916CLYFPR

Texas Instruments

TPS22916CLYFPR by Texas Instruments is a peripheral driver with max supply voltage of 5.5V, min supply voltage of 1V, and operating temp range from -40 to 85°C. It features built-in transient protections and is ideal for industrial applications requiring buffer or inverter based peripheral drivers.

AUIR2085STR

Infineon Technologies

AUIR2085STR by Infineon is a CMOS peripheral driver with 8 terminals, operating voltage of 10-15V. It offers built-in protections against transient, over current, and under voltage. Ideal for automotive applications due to AEC-Q100 screening and small outline package style.

BTS409L1E3062ABUMA1

Infineon Technologies

BTS409L1E3062ABUMA1 by Infineon is a 6-terminal peripheral driver with built-in protections. It operates at a supply voltage range of 5-34 V and has a nominal output peak current limit of 7.5 A. Widely used in applications requiring source flow direction, such as automotive systems for efficient power management.

BSP78

Infineon Technologies

BSP78 by Infineon Technologies is a MOS technology peripheral driver with built-in protections for transient, over current, and over voltage. It operates at 12V nominal voltage with a peak output current limit of 24A. This rectangular package style IC is ideal for automotive applications requiring fast turn-on/off times and sink output current flow direction.

BTM7740GXUMA1

Infineon Technologies

Infineon's BTM7740GXUMA1 is a 28-terminal peripheral driver with a peak current limit of 15A. It features Gull Wing terminals, suitable for surface mount applications. This buffer/inverter-based driver supports bidirectional current flow and is ideal for various electronic systems requiring high output currents.

BSP452XT

Infineon Technologies

BSP452XT by Infineon Technologies is a MOS technology peripheral driver with built-in protections for over current, over voltage, and under voltage. It operates at a nominal voltage of 13.5 V and has a max supply voltage of 34 V. With a turn-on time of 100 us and turn-off time of 150 us, it is ideal for applications requiring sink output current flow direction in compact designs.

ITS4140N

Infineon Technologies

ITS4140N by Infineon Technologies is a peripheral driver with a max supply voltage of 60V. It offers built-in protections against transient, over current, over voltage, and thermal issues. This small outline MOS technology device is commonly used as a buffer or inverter based peripheral driver for various applications.

ULN2003APWRE4

Texas Instruments

ULN2003APWRE4 by Texas Instruments is a 7-bit buffer/inverter peripheral driver with 16 terminals. It features open-collector output, transient protection, and sink current flow direction. This bipolar technology IC is ideal for applications requiring inverted output polarity in a small outline package.

VNB14N04

STMicroelectronics

VNB14N04 by STMicroelectronics is a MOS technology peripheral driver with built-in protections for transient, over current, and thermal issues. It features an open-drain output polarity with a nominal output peak current limit of 14A. This small outline package is ideal for applications requiring buffer or inverter based interface ICs.

UCC27201ADDAR

Texas Instruments

UCC27201ADDAR by Texas Instruments is a half bridge peripheral driver with 2 channels, capable of handling up to 3A output current. It operates in automotive-grade temperatures (-40 to 140°C) and has built-in under voltage protection. This small outline package (4.9mm x 3.9mm) is ideal for applications requiring true output polarity control and fast turn-on/off times (0.007us).

BTS452R

Infineon Technologies

BTS452R by Infineon Technologies is a MOS technology peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w -40 to 150 °C with a supply voltage range of 6-52 V. This rectangular package is ideal for automotive applications requiring source and sink output current flow direction.

AD5751ACPZ-REEL7

Analog Devices

AD5751ACPZ-REEL7 by Analog Devices is a surface mount peripheral driver with a max supply voltage of 5.5V. It has built-in protections against over current and is suitable for industrial applications requiring a nominal voltage of 3V and an output peak current limit of 0.015A.

BTS442E2E3062AXT

Infineon Technologies

BTS442E2E3062AXT by Infineon Technologies is a peripheral driver with a max supply voltage of 42V. It offers built-in protections for transient, over current, over voltage, thermal, and under voltage conditions. This MOS technology-based device has a nominal output peak current limit of 70A and is commonly used as a buffer or inverter based peripheral driver.

BSP452HUMA1

Infineon Technologies

BSP452HUMA1 by Infineon is a MOS technology peripheral driver with 4 terminals. It offers built-in protections for transient, over current, over voltage, and under voltage. With a max supply voltage of 34V, it is ideal for applications requiring buffer or inverter based interface ICs.

BTS141BKSA1

Infineon Technologies

BTS141BKSA1 by Infineon is a MOS technology peripheral driver with 12V nominal voltage and 12A output peak current limit. It offers overcurrent, overvoltage, and thermal protections, making it ideal for applications requiring sink output current flow direction in automotive systems. The package style is flange mount with a rectangular shape and single terminal position.

VN750PSTR-E

STMicroelectronics

STMicroelectronics' VN750PSTR-E is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates within a supply voltage range of 5.5V to 36V and can handle a max output current of 2A. Ideal for applications requiring true output polarity and source flow direction in compact designs.

VND5050AKTR-E

STMicroelectronics

VND5050AKTR-E by STMicroelectronics is a 24-terminal peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates on power supplies ranging from 8V to 36V and has a max supply voltage of 36V. This rectangular package with gull wing terminals is ideal for buffer or inverter-based interface IC applications.

PTPS1H200AQDGNRQ1

Texas Instruments

PTPS1H200AQDGNRQ1 by Texas Instruments is a Peripheral Driver with 8 terminals, operating voltage range of 4-40V, and built-in protections against transient, over current, and thermal issues. It is designed for automotive applications with a small outline package style and AEC-Q100 screening level.

L298HN

STMicroelectronics

L298HN by STMicroelectronics is a full bridge peripheral driver with 2 functions, operating at 5V nominal voltage and 46V max supply voltage. It features built-in over current protection, totem-pole output characteristics, and source/sink output current flow direction. Ideal for applications requiring high-power motor control in robotics or automation systems.