Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

BSP75GTA

Manufacturer

Zetex Plc
Manufacturer's Part Number

BSP75GTA
Description

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Time At Peak Reflow Temperature (s): 40;
Datasheet

Datasheet

Not In Stock

Popular Products

1N4148

Philips Components

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

KSZ9031RNXIA

Microchip Technology

KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.

Details

TCA6424ARGJR

Texas Instruments

TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.

Details

LM555CM

Harris Semiconductor

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

LL4148

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LL4148

Rfe International

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BAV99

Temic Semiconductors

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM555CMX

National Semiconductor

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

1N4148

Dc Components

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

M39029/58-360

Positronic Industries

CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;

Details

1N4148

Microchip Technology

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BAV99

Formosa Microsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM555CN

Onsemi

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;

Details

BSS138

National Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;

Details

FDV303N

Onsemi

FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.

Details

CRCW040210K0FKED

Vishay Intertechnology

Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.

Details

SS14

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Taitron Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

EPCS4SI8N

Altera

CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;

Details

1N4148WS

Rugao Dachang Electronic

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSP75GTA Technical Details

TYPE	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	12 V
Maximum Time At Peak Reflow Temperature (s):	40
Maximum Seated Height:	1.8 mm
Surface Mount:	YES
Terminal Finish:	Matte Tin (Sn)
No. of Terminals:	4
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
JESD-30 Code:	R-PDSO-G4
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Built-in Protections:	OVER CURRENT; OVER VOLTAGE; THERMAL
Package Code:	SOP
Interface IC Type:	BUFFER OR INVERTER BASED PERIPHERAL DRIVER
Width:	3.5 mm
Turn-off Time:	20 us
Moisture Sensitivity Level (MSL):	1
Other Names:	BSP75FTR UBSP75GTR UBSP75GTA BSP75GTR-NDR BSP75GCT-NDR UBSP75GTR-ND BSP75GCT UBSP75GCT-ND BSP75GTR BSP75GDKR UBSP75GCT
Maximum Supply Voltage:	32 V
Turn-on Time:	10 us
Nominal Output Peak Current Limit:	3 A
JESD-609 Code:	e3
No. of Functions:	1
Qualification:	Not Qualified
Output Current Flow Direction:	SOURCE
Length:	6.5 mm
Peak Reflow Temperature (C):	260
Terminal Pitch:	2.3 mm

Category Top Products

VN820SP

STMicroelectronics

VN820SP by STMicroelectronics is a MOS technology-based peripheral driver with built-in protections against transient, over current, over voltage, thermal, and under voltage. It operates within a power supply range of 8-36V and can handle a max output current of 9A. This small outline package is ideal for applications requiring source flow direction in automotive systems.

FSFR2100XS

Onsemi

FSFR2100XS by Onsemi is a half bridge peripheral driver with 9 terminals in a rectangular package. It offers over current, over voltage, thermal, and under voltage protection. Ideal for applications requiring source and sink output current flow control.

ULN2003A

Vishay Intertechnology

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Driver No. of Bits: 7;

IRS21844SPBF

Infineon Technologies

IRS21844SPBF by Infineon Technologies is a 14-terminal peripheral driver with built-in transient and under voltage protections. It operates b/w -40 to 125 °C, suitable for automotive applications. With a turn-on time of 0.9 us and turn-off time of 0.4 us, it supports a max supply voltage of 20 V.

TBD62083AFNG(Z.EL)

Toshiba

The TBD62083AFNG(Z.EL) by Toshiba is a peripheral driver with 8 functions. It has a maximum supply voltage of 25V and a minimum supply voltage of 2.5V. The package style is small outline, low profile, shrink pitch. It can handle a maximum operating temperature of 85°C and a minimum operating temperature of -40°C. Its width is 4.4mm and its length is 6.5mm. The TBD62083AFNG(Z.EL) is an industrial-grade BCDMOS technology device with a nominal supply voltage of 5V. Its interface IC type is buffer or inverter based peripheral driver, and it has a sink output current flow direction.

MIC5841YWM-TR

Micrel

SIPO BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR;

IRS2103PBF

International Rectifier

HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

IRS21864STRPBF

International Rectifier

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;

BSP78HUMA1

Infineon Technologies

BSP78HUMA1 by Infineon Technologies is a MOS technology-based peripheral driver with built-in protections for transient, over current, and over voltage. It operates in industrial temperature range (-40 to 85 °C) with a nominal voltage of 12V. With a small outline package style, it is ideal for applications requiring a sink output current flow direction and turn-on/off time of 100 us.

VN7003ALHTR

STMicroelectronics

STMicroelectronics' VN7003ALHTR is a peripheral driver with 8 terminals, AEC-Q100 screening level, and built-in protections for transient, over voltage, thermal, and under voltage. It operates at supply voltages ranging from 4V to 28V and has a turn-on time of 120us. Ideal for applications requiring buffer or inverter based peripheral drivers in automotive electronics.

ITS716G

Infineon Technologies

ITS716G by Infineon Technologies is a Peripheral Driver with 4 functions, operating at 5.5-40V, ideal for commercial applications. It offers built-in protections against transient, over current, and over voltage events, with a turn-on time of 250us and turn-off time of 270us. This small outline driver has a nominal output peak current limit of 0.7A and operates in temperatures ranging from -30 to 85°C.

UCC23513DWY

Texas Instruments

UCC23513DWY by Texas Instruments is a small outline peripheral driver with built-in transient and under voltage protections. It operates in industrial temperature range (-40 to 115°C) and can handle up to 33V supply voltage, providing a max output current of 4.5A. Ideal for applications requiring source and sink current flow direction control, such as buffer or inverter-based systems.

VNQ5160K-E

STMicroelectronics

STMicroelectronics' VNQ5160K-E is a 4-function peripheral driver with built-in protections. It operates on power supplies ranging from 8V to 36V, offering a turn-on/off time of 15us. This small outline package is ideal for applications requiring source output current flow direction and interface IC type as buffer or inverter based peripheral driver.

MAX845ESA+

Maxim Integrated

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

BSP76E6433HUMA1

Infineon Technologies

BSP76E6433HUMA1 by Infineon is a MOS technology-based peripheral driver with built-in protections for transient, over current, and over voltage. It operates in industrial temperature range (-40 to 85°C) with a nominal voltage of 12V. This small outline package (6.5x3.5x1.8mm) is surface mountable and suitable for buffer or inverter based applications requiring a peak output current limit of 1.8A.

BTS428L2

Infineon Technologies

BTS428L2 by Infineon is a MOS technology-based peripheral driver with built-in protections against transient, over current, and over voltage. It operates at supply voltages ranging from 4.75V to 41V, making it suitable for automotive applications requiring a max output current of 5.8A in a compact small outline package style.

TPS22916CLYFPR

Texas Instruments

TPS22916CLYFPR by Texas Instruments is a peripheral driver with max supply voltage of 5.5V, min supply voltage of 1V, and operating temp range from -40 to 85°C. It features built-in transient protections and is ideal for industrial applications requiring buffer or inverter based peripheral drivers.

AD5749ACPZ-RL7

Analog Devices

AD5749ACPZ-RL7 by Analog Devices is a Peripheral Driver with 32 terminals, operating voltage range of 2.7V to 5.5V, and max supply current of 6.2mA. It is used in industrial applications requiring a buffer or inverter based peripheral driver with source output current flow direction.

ITS428L2

Infineon Technologies

ITS428L2 by Infineon is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w -30 to 85°C with a supply voltage range of 4.75V to 43V. This small outline IC is ideal for buffer or inverter-based applications requiring a peak output current limit of 1.8A.

PTPS22919QDCKRQ1

Texas Instruments

PTPS22919QDCKRQ1 by Texas Instruments is a peripheral driver with 6 terminals, offering built-in protections for transient, over current, and thermal issues. It operates b/w -40 to 125 °C with a supply voltage range of 1.6V to 5.5V, making it ideal for automotive applications requiring a max output current of 1.5A.