Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

231-136/001-000

Manufacturer

Wago
Manufacturer's Part Number

231-136/001-000
Description

STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: CONNECTOR; Additional Features: PA66, UL 94V-0; Voltage (Rated): 630 V; Safety Approval: CCA; UL;
Datasheet

Datasheet

Not In Stock

Popular Products

CRG0805F10K

TE Connectivity

TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.

Details

M39029/58-360

Carlisle Interconnect Technologies

GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;

Details

2N2222A

Itt Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

1N4148

Continental Device India

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

NC7WZ07P6X

Onsemi

The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.

Details

2N2222A

Tesla Elektronicke Soucastky

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

CSNF651

Honeywell Sensing And Control

CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.

Details

1N4148WS

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

EU2B-YS3103F

Idec

ROTARY SWITCH;

Details

M39029/58-360

Fct Electronic

CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;

Details

BAV99

Transys Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

Onsemi

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;

Details

LM358D-T

Philips Semiconductors

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

DS18B20Z+

Analog Devices

DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.

Details

2N2222A

Micro Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

LM317D2TG

Onsemi

LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.

Details

LM358AN

Fairchild Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

ULN2803A

Texas Instruments

ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.

Details

DS18B20U+

Maxim Integrated

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;

Details

SMBJ18CA

Diodes Incorporated

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

231-136/001-000 Technical Details

TYPE	DESCRIPTION
Mounting Style:	Board
Other Names:	231136/001000 2943-231-136/001-000-ND 2946-231-136/001-000 51148924 0231-136/001-000 0231136/001000 0231-0136/0001-0000 2943-231-136/001-000
Total Ways:	6
Product Type:	Strip Terminal Block
Safety Compliance:	CCA; UL
Additional Features:	PA66, UL 94V-0
Total Rows:	1
Fastening Style:	Connector
Rated Current:	12 A
Total Decks:	1
Rated Voltage:	630 V

Category Top Products

1-321235-1

TE Connectivity

PUSH-ON TERMINAL; Wire Gauge: 10 AWG; Safety Approval: UL; Wire Cross Section: 6 mm2; Terminal Gender: FEMALE;

160173-2

TE Connectivity

PUSH-ON TERMINAL; Wire Gauge: 20 AWG; Terminal Gender: FEMALE; Wire Cross Section: .51 mm2; Safety Approval: UL;

MS25036-152

Defense Logistics Agency

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Wire Cross Section: 2.62 mm2; Safety Approval: UL;

3-140

Bel Fuse

3-140 by Bel Fuse is a BARRIER STRIP TERMINAL BLOCK with 2 rows and 3 ways. It has a rated voltage of 250V, current of 15A, and supports wire gauge up to 16 AWG. Ideal for applications requiring secure electrical connections in industrial settings with CSA and UL safety approvals.

1066

Advanced Interconnections

PCB TERMINAL; Terminal Gender: FEMALE;

1SNK705065R0000

TE Connectivity

TE Connectivity's 1SNK705065R0000 is a DIN RAIL mounted MODULAR TERMINAL BLOCK with UL safety approval. It supports wire gauge up to 12 AWG, voltage rating of 600V, and current rating of 20A. Ideal for applications requiring secure electrical connections in industrial settings.

1066

Ntt

LUG TERMINAL; Additional Features: MATERIAL: STEEL; FINISH: TIN;

4513-4

Litton Industries

PCB TERMINAL; Manufacturer Series: 4513; Terminal Gender: MALE;

8-5

J S T Mfg

RING TERMINAL; Wire Gauge: 8 AWG; Wire Cross Section: 10.52 mm2; Terminal Gender: FEMALE;

50011-8000

Molex

PUSH-ON TERMINAL; Wire Gauge: 24 AWG; Terminal Gender: FEMALE;

2-320383-2

TE Connectivity

RING TERMINAL; Wire Gauge: 2 AWG; Wire Cross Section: 35 mm2; Manufacturer Series: 320383;

MSTBVA2,5/3-G-5,08

Phoenix Contact

Phoenix Contact's MSTBVA2,5/3-G-5,08 is a 3-way strip terminal block with a rated voltage of 320V and current of 12A. It is approved by CB, CCA, CSA, CUL, EAC, and UL for safety. Ideal for board mounting applications using connector fastening method.

2-33466-1

TE Connectivity

RING TERMINAL; Wire Gauge: 6 AWG; Wire Cross Section: 15 mm2; Safety Approval: UL; No. of Ways: 1;

52422-1

TE Connectivity

TE Connectivity's 52422-1 is a UL-approved FORK TERMINAL for 14 AWG wire, rated at 300V. With a wire cross section of 2 mm2, it is designed for FEMALE terminals in various applications.

31425

TE Connectivity

RING TERMINAL; Wire Gauge: 22 AWG; No. of Ways: 1; Terminal Gender: FEMALE; Safety Approval: UL; Wire Cross Section: .4 mm2;

1787072

Phoenix Contact

Phoenix Contact 1787072 is a 2-row strip terminal block with 8 ways and rated voltage of 160V. It has CB, CUL, UL, VDE safety approvals and fastens via connector. Ideal for board and panel mounting, it handles up to 8A current making it suitable for various industrial applications.

35109

TE Connectivity

TE Connectivity 35109 is a UL-approved FEMALE RING TERMINAL for 10 AWG wire with a rated voltage of 300V. Featuring a wire cross section of 6.64 mm2, it is ideal for electrical connections in various applications requiring secure and reliable terminal blocks.

D-436-38-COLD

TE Connectivity

BUTT TERMINAL; Mounting Type: CABLE; Wire Gauge: 12 AWG; Safety Approval: UL; Wire Cross Section: 2.94 mm2;

MS25036-107

Panduit

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Safety Approval: UL; No. of Ways: 1;

280-901

Wago

The Wago 280-901 is a modular terminal block with 2 rows, rated for 20A current and 600V voltage. It features DIN rail mounting, CSA/UL safety approvals, and spring-loaded fastening. Ideal for applications requiring secure wire connections up to 12 AWG wire gauge and 2.5mm² wire cross-section in industrial settings.