Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

33466

Manufacturer

TE Connectivity
Manufacturer's Part Number

33466
Description

RING TERMINAL; Wire Gauge: 6 AWG; No. of Ways: 1; Safety Approval: UL; Terminal Gender: FEMALE; Wire Cross Section: 16.8 mm2;
Datasheet

Datasheet

Not In Stock

Popular Products

1N4148WS

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Yangzhou Yangjie Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;

Details

M39029/58-360

Itt Cannon

CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;

Details

2N7002

Calogic

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;

Details

C1210C104K5RACTU

KEMET Corporation

KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.

Details

1N4148

Renesas Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

AT90CAN128-16AUR

Microchip Technology

AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.

Details

2N7002

Lite-on Semiconductor

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;

Details

LL4148

Synsemi

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

EPCS4SI8N

Altera

CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;

Details

NDT2955

Onsemi

NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.

Details

SS14

Promax-johnton

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

Onsemi

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;

Details

SS14

General Instrument

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

DS18B20Z+T&R

Maxim Integrated

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;

Details

BAV99+

Multicomp Pro

BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.

Details

AT90CAN128-16AU

Microchip Technology

AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.

Details

1N4148

Forward International Electronics

RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;

Details

BAV99

Panasonic

MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Tak Cheong Electronics Holdings

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

33466 Technical Details

TYPE	DESCRIPTION
Total Ways:	1
Wire Cross Section:	16.8 mm²
Terminal Gender:	Female
Product Type:	Ring Terminal
Safety Compliance:	UL
Wire Gauge:	6 AWG

Category Top Products

3-140

Cinch Connectivity Solutions

BARRIER STRIP TERMINAL BLOCK; Fastening Method: SCREW; Additional Features: PHENOLIC, 94V-1; Wire Gauge: 16 AWG; Voltage (Rated): 250 V; No. of Decks: 1;

MS25036-105

TE Connectivity

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 18 AWG; Voltage (Rated): 600 V; Safety Approval: CSA; UL; Wire Cross Section: 1.5 mm2;

3210271

Phoenix Contact

MODULAR TERMINAL BLOCK;

1702473

Phoenix Contact

Phoenix Contact 1702473 is a BARRIER STRIP TERMINAL BLOCK with 2 ways, rated for 6A current and 160V voltage. It uses SPRING LOADED fastening method and supports wire gauge up to 20 AWG (0.5 mm2). Ideal for BOARD mounting, it holds EAC and UL safety approvals, suitable for various terminal applications.

624

Tyco Electronics Amp

MODULAR TERMINAL BLOCK; Mounting Type: CABLE; Fastening Method: SCREW; Additional Features: POLYAMIDE; Wire Gauge: 8 AWG; Voltage (Rated): 300 V;

H3182-01

Harwin Plc

PCB TERMINAL; Terminal Gender: MALE;

1273-1

Litton Industries

PCB TERMINAL; Manufacturer Series: 1273; Terminal Gender: MALE;

1546163-1

TE Connectivity

MODULAR TERMINAL BLOCK; Manufacturer Series: 1546163;

MS25036-150

Panduit

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 18 AWG; Voltage (Rated): 600 V; Wire Cross Section: 1.5 mm2; Safety Approval: CSA; UL;

190070040

Molex

PUSH-ON TERMINAL; Wire Gauge: 10 AWG; Manufacturer Series: 19007; Terminal Gender: FEMALE;

MS25036-103

TE Connectivity

TE Connectivity's MS25036-103 is a UL-approved ring terminal with a wire gauge of 16 AWG and a rated voltage of 300V. It is suitable for applications requiring a single-way connection, with a wire cross section of 1.65 mm2.

938

Zierick Manufacturing

RING TERMINAL; Terminal Gender: MALE;

1803468

Phoenix Contact

The Phoenix Contact 1803468 is a modular terminal block with 6 ways and a rated voltage of 160V. It is UL, VDE, and CSA approved for safety and has a fastening method of connector. This terminal block is commonly used in board mounting applications.

MCV1,5/4-G-3,81

Phoenix Contact

Phoenix Contact's MCV1,5/4-G-3,81 is a 4-way barrier strip terminal block with a rated voltage of 160V and current of 8A. It is approved by CB, CSA, CUL, EAC, EN, VDE, and UL for safety. Ideal for board mounting applications using connector fastening method.

66200113722DEC

Wuerth Elektronik & Kg

Terminals and Terminal Blocks;

MS25036-111

Amphenol Communications Solutions

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 10 AWG; Voltage (Rated): 600 V; Wire Cross Section: 6 mm2; Safety Approval: CSA; UL;

221-415

Wago

Wago 221-415 SPLICE TERMINAL rated at 32A/450V, accepts 12 AWG wire with 4mm2 cross section. UL approved for secure electrical connections in various applications.

2-320383-2

TE Connectivity

RING TERMINAL; Wire Gauge: 2 AWG; Wire Cross Section: 35 mm2; Manufacturer Series: 320383;

MPT0,5/2-2,54

Phoenix Contact

Phoenix Contact's MPT0,5/2-2,54 is a 2-way barrier strip terminal block with a rated current of 6A and voltage of 160V. It supports wire gauge up to 20 AWG and wire cross-section of 0.5mm². Ideal for board mounting applications, it holds safety approvals from CSA, CUL, EAC, and UL.

34130

Weidmueller & Kg

WIRE TERMINAL;