Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

1-1776263-5

Manufacturer

Tyco Electronics Amp
Manufacturer's Part Number

1-1776263-5
Description

BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Additional Features: STANDARD: UL94V-0, POLYAMIDE/ POLYESTER; Wire Gauge: 16 AWG; Voltage (Rated): 300 V;
Datasheet

Datasheet

Not In Stock

Popular Products

M85049/85-08W02

Amphenol

CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;

Details

BAV99

Formosa Microsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358AN

STMicroelectronics

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

IRLML6401TRPBF

International Rectifier

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;

Details

ATMEGA328P-AU

Microchip Technology

ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.

Details

KSZ9031RNXIC

Microchip Technology

KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.

Details

LM555CM

Onsemi

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

BSS138

Diodes Incorporated

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;

Details

SMBJ18CA

Weitron Technology

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

International Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

2N2222A

Philips Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

1N5819HW-7-F

SPC TECHNOLOGY/ MULTICOMP

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M24308/2-1F

TE Connectivity

TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.

Details

SS14

Jinan Jingheng Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MBRS1100T3G

Onsemi

MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.

Details

2N2222A

Electronic Transistors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

LL4148

Taitron Components

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

2N2222A

Swampscott Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

M39029/58-360

Defense Logistics Agency

CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;

Details

1N4148WS

Good-ark Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1-1776263-5 Technical Details

TYPE	DESCRIPTION
Mounting Style:	Board
Total Ways:	15
Wire Cross Section:	1.4 mm²
Product Type:	Barrier Strip Terminal Block
Safety Compliance:	UL
Additional Features:	Standard: UL 94V-0, PA/Polyester
Total Rows:	1
Fastening Style:	Screw
Rated Current:	10 A
Wire Gauge:	16 AWG
Total Decks:	1
Rated Voltage:	300 V

Category Top Products

MS25036-152

Defense Logistics Agency

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Wire Cross Section: 2.62 mm2; Safety Approval: UL;

3-520140-2

TE Connectivity

TE Connectivity 3-520140-2 is a UL-approved PUSH-ON TERMINAL for 14 AWG wire, rated at 600V. With a wire cross section of 2.08 mm², it's ideal for female terminal applications in various industries like automotive and electronics.

12507

Molex

The Molex 12507 is a Barrier Strip Terminal Block with 7 ways, rated at 300V/15A. It uses screw fastening method and supports wire gauge up to 16 AWG. Ideal for BOARD mounting, it has CSA & UL safety approvals making it suitable for various electrical applications.

320559

TE Connectivity

BUTT TERMINAL; Additional Features: MATERIAL: COPPER ALLOY; Wire Gauge: 16 AWG; Wire Cross Section: 1.42 mm2; Safety Approval: UL;

8-320563-1

TE Connectivity

TE Connectivity's 8-320563-1 is a UL-approved RING TERMINAL for 14 AWG wire, rated at 300V. With a wire cross section of 2 mm2, this FEMALE terminal block is ideal for various electrical applications.

191930248

Molex

RING TERMINAL; Wire Gauge: 6 AWG; Terminal Gender: FEMALE;

1952322

Phoenix Contact

The Phoenix Contact 1952322 is a UL-approved barrier strip terminal block with 8 ways and a rated current of 8A. It has a mounting type of CABLE and can accommodate wire gauge up to 16 AWG, making it suitable for various electrical applications.

2-320563-2

TE Connectivity

TE Connectivity 2-320563-2 is a UL-approved RING TERMINAL for 14 AWG wire, rated at 300V. With a wire cross section of 2 mm2, it's ideal for female terminals in various applications.

1851258

Phoenix Contact

The Phoenix Contact 1851258 is a Barrier Strip Terminal Block with 4 ways, rated for 8A current and 160V voltage. Featuring spring-loaded fastening method, it accepts wire gauge up to 16 AWG (1.5 mm2). Ideal for applications requiring CB, CSA, CUL, EAC, UL, VDE safety approvals.

320551

TE Connectivity

TE Connectivity 320551 is a UL-approved FEMALE RING TERMINAL for 16 AWG wire with 300V rating. Ideal for electrical connections in various applications requiring secure and reliable terminal blocks.

MS25036-106

Defense Logistics Agency

FORK TERMINAL; Additional Features: NYLON; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Wire Cross Section: 2 mm2; Safety Approval: UL;

D-436-36CS2651

TE Connectivity

WIRE TERMINAL; Mounting Type: CABLE; Wire Gauge: 20 AWG; Wire Cross Section: .61 mm2; Safety Approval: UL;

36.06

Altech

The Altech 36.06 is a BARRIER STRIP TERMINAL BLOCK with BOARD mounting, rated for 300V voltage and 15A current. It has CSA, IEC, UL, VDE safety approvals and accommodates wire gauge up to 10 AWG. Ideal for applications requiring secure connections in industrial settings with multiple ways available for wiring configurations.

320568

TE Connectivity

TE Connectivity 320568 is a UL-approved RING TERMINAL with a wire gauge of 10 AWG and rated voltage of 300 V. It is suitable for use in terminals & terminal blocks, offering a wire cross section of 6 mm2 and one-way connection.

327638

Tyco Electronics Amp

BUTT TERMINAL; Wire Gauge: 10 AWG; Terminal Gender: FEMALE; Wire Cross Section: 6.64 mm2;

1269

Keystone Electronics

TAB TERMINAL; Terminal Gender: MALE;

1110

Zierick Manufacturing

TAB TERMINAL; Terminal Gender: MALE;

1715747

Phoenix Contact

The Phoenix Contact 1715747 is a modular terminal block with a mounting type of BOARD. It has a rated voltage of 250V and can handle currents up to 22A. With its safety approvals from CSA and UL, it is suitable for various applications requiring secure connections and wire cross sections of up to 2.5mm2.

1854022

Phoenix Contact

The Phoenix Contact 1854022 is a UL-approved barrier strip terminal block with 8 ways and 2 decks. It has a rated voltage of 160V, current of 10A, and accepts wire gauge up to 16 AWG. Ideal for panel mounting applications requiring secure connections with screw fastening method.

MS25036-106

Panduit

FORK TERMINAL; Additional Features: NYLON; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Safety Approval: UL; No. of Ways: 1;