Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

1714955

Manufacturer

Phoenix Contact
Manufacturer's Part Number

1714955
Description

BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Additional Features: PA, UL 94V-0; Wire Gauge: 10 AWG; Voltage (Rated): 500 V;
Datasheet

Datasheet

Not In Stock

Popular Products

BSS138

Diodes Incorporated

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;

Details

LM555CN

Rca Solid State

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;

Details

DS18B20Z

Dallas Semiconductor

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;

Details

LL4148

Vishay Intertechnology

Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.

Details

KSZ9031RNXIC

Microchip Technology

KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.

Details

2N7002

Transys Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;

Details

LM358N

Samsung

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

FT232RL-REEL

FTDI

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

Details

SMBJ18CA

Weitron Technology

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

STM32F103C8T6

STMicroelectronics

STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.

Details

SS14

Daco Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Fairchild Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

SDR0604-101KL

Bourns

SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.

Details

1N4148

Grande Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N2222A

Forward International Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;

Details

1N4148

Sangdest Microelectronics (Nanjing)

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148

Philips Semiconductors

RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;

Details

BAV99

MICRODIODE ELECTRONICS SHENZHEN CO LTD

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM555CM

Texas Instruments

LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.

Details

ABS25-32.768KHZ-1-T

Abracon

Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.

Details

1714955 Technical Details

TYPE	DESCRIPTION
Mounting Style:	Board
Other Names:	277-1269 MKDS5/2-6,35 MKDS 5/2-6.35
Total Ways:	2
Total Rows:	1
Fastening Style:	Screw
Wire Gauge:	10 AWG
Total Decks:	1
Rated Voltage:	500 V
Wire Cross Section:	6 mm²
Product Type:	Barrier Strip Terminal Block
Safety Compliance:	UL
Additional Features:	PA, UL 94V-0
Rated Current:	32 A

Category Top Products

4-520447-2

TE Connectivity

TE Connectivity's 4-520447-2 is a UL-approved PUSH-ON TERMINAL for 10 AWG wire at 600V. With a wire cross section of 5.26 mm2, this FEMALE terminal block is ideal for various electrical applications.

PMNF1-3R-M

Panduit

RING TERMINAL; Wire Cross Section: 1.5 mm2; Manufacturer Series: PMNF1;

350436-2

TE Connectivity

RING TERMINAL; Wire Gauge: 14 AWG; Wire Cross Section: 2 mm2; Safety Approval: UL; No. of Ways: 1; Terminal Gender: FEMALE;

1827716

Phoenix Contact

Phoenix Contact 1827716 is a UL-approved modular terminal block for PANEL mounting. It supports wire gauge up to 16 AWG with rated voltage of 160V and current of 8A. Ideal for applications requiring secure connections in industrial control systems.

1SNK505064R0000

Abb

MODULAR TERMINAL BLOCK; Mounting Type: DIN RAIL; Wire Gauge: 12 AWG; Voltage (Rated): 600 V; No. of Ways: 1; No. of Decks: 1;

2-35109-1

TE Connectivity

TE Connectivity 2-35109-1 is a UL-approved RING TERMINAL for 10 AWG wire, rated at 300V. With a wire cross section of 6.64 mm2, it's ideal for female terminals in various applications requiring secure electrical connections.

1745894

Phoenix Contact

The Phoenix Contact 1745894 is a Barrier Strip Terminal Block with 2 ways, rated for 8A current and 160V voltage. Featuring push-in fastening method, it accepts wire gauge up to 16 AWG (1.5 mm2). Ideal for applications requiring secure electrical connections in industrial settings.

1715721

Phoenix Contact

Phoenix Contact 1715721 is a BOARD-mounted BARRIER STRIP TERMINAL BLOCK with 14 AWG wire gauge, rated for 400V voltage and 17.5A current. It has CCA, CSA, CUL, GL, GOST, SEV safety approvals and is ideal for applications requiring secure electrical connections in industrial settings.

MS-25036-111

Molex

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 10 AWG; Voltage (Rated): 600 V; Wire Cross Section: 6 mm2; Safety Approval: CSA; UL;

1217754-1

TE Connectivity

TAB TERMINAL; Terminal Gender: MALE; Safety Approval: UL;

1052

Trelec

LUG TERMINAL;

1SNK705010R0000

TE Connectivity

TE Connectivity's 1SNK705010R0000 is a DIN RAIL modular terminal block with UL safety approval. Rated for 600V voltage, it supports 12 AWG wire gauge and 2.5mm2 wire cross section, handling up to 20A current. Ideal for industrial applications requiring secure electrical connections on DIN rails.

4164

Keystone Electronics

STRIP TERMINAL BLOCK; Mounting Type: PANEL; Fastening Method: SCREW; Additional Features: FIBERGLASS; No. of Decks: 1; No. of Ways: 8;

1731734

Phoenix Contact

Phoenix Contact 1731734 is a UL-approved barrier strip terminal block with 3 ways, rated for 24A current and 500V voltage. It accommodates wire gauge up to 12 AWG and wire cross-section of 2.5mm², mounted on board using screw fastening method. Ideal for industrial applications requiring secure electrical connections.

33465

TE Connectivity

RING TERMINAL; Wire Gauge: 6 AWG; Wire Cross Section: 16.8 mm2; Terminal Gender: FEMALE; No. of Ways: 1; Safety Approval: UL;

640907-2

Tyco Electronics Amp

PUSH-ON TERMINAL; Wire Gauge: 10 AWG; Voltage (Rated): 300 V; Safety Approval: UL; Terminal Gender: FEMALE; Wire Cross Section: 6.64 mm2;

1269

Keystone Electronics

TAB TERMINAL; Terminal Gender: MALE;

1840421

Phoenix Contact

Phoenix Contact 1840421 is a STRIP TERMINAL BLOCK with 8 ways, rated for 160V voltage and 8A current. It supports wire gauge up to 16 AWG and wire cross section of 1.5 mm2. Ideal for BOARD mounting in various applications requiring CB, CSA, CUL, GOST, UL, VDE safety approvals.

640903-2

TE Connectivity

TE Connectivity's 640903-2 is a female PUSH-ON TERMINAL with UL approval, rated for 300V and 18 AWG wire. Ideal for applications requiring 0.96 mm2 wire cross section such as automotive and industrial electronics.

77628-61

Beau Interconnect

BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Additional Features: LOW PROFILE, POLYETHYLENE, 94V-0; Wire Gauge: 12 AWG; Voltage (Rated): 300 V;