Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

2-36160-1

Manufacturer

TE Connectivity
Manufacturer's Part Number

2-36160-1
Description

RING TERMINAL; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Wire Cross Section: 2.62 mm2; Safety Approval: UL; No. of Ways: 1;
Datasheet

Datasheet

Not In Stock

Popular Products

2N2222A

New Jersey Semiconductor Products

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;

Details

BSS123LT1G

Onsemi

BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.

Details

SS14

Zowie Technology

RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;

Details

1N4148

Good-ark Electronics

RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;

Details

ERJU06F10R0V

Panasonic

ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.

Details

87832-1420

Molex

87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.

Details

BSS138BK,215

Nexperia

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;

Details

DRV5053VAQLPG

Texas Instruments

Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.

Details

LM358N

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

GRM155R71H103KA88D

Murata Manufacturing

The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.

Details

1N4148WS

Rochester Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SS14

Silicon Standard

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Vishay Sprague

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Philips Components

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N7002

Secos

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;

Details

2N7002

National Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;

Details

MMBT2222ALT1G

Rochester Electronics

NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;

Details

2N2222A

Continental Device India

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

BAV99

Gec Plessey Semiconductors

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138LT3G

Onsemi

BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.

Details

2-36160-1 Technical Details

TYPE	DESCRIPTION
Other Names:	2361601 A28120-ND 2-36160-1-ND A1072TR A1072CT A28120 -2-36160-1-SI
Total Ways:	1
Wire Cross Section:	2.62 mm²
Product Type:	Ring Terminal
Safety Compliance:	UL
Wire Gauge:	14 AWG
Rated Voltage:	300 V

Category Top Products

1733651

Phoenix Contact

Phoenix Contact 1733651 is a BARRIER STRIP TERMINAL BLOCK with 10 ways, rated for 17.5A current and 400V voltage. It uses SCREW fastening method and supports wire gauge up to 14 AWG. Ideal for BOARD mounting, it has safety approvals from CB, CCA, CSA, CUL, GOST, and UL.

MS-25036-149

Molex

Molex MS-25036-149 is a CSA/UL approved RING TERMINAL for 16 AWG wire, rated at 300V. With a wire cross section of 1.31 mm2, it's ideal for female terminals in various electrical applications.

3044102

Phoenix Contact

Phoenix Contact 3044102 is a modular terminal block with 2 rows, rated for 800V voltage and 41A current. It supports wire gauge up to 10 AWG and wire cross-section of 6mm². Ideal for C RAIL mounting, UL/CSA approved, it's suitable for industrial applications requiring secure connections.

62409-1

TE Connectivity

TAB TERMINAL; Safety Approval: UL; Terminal Gender: MALE;

50011-8100

Molex

PUSH-ON TERMINAL; Wire Gauge: 24 AWG; Terminal Gender: FEMALE;

3571

Keystone Electronics

TAB TERMINAL;

MS25036-150

Panduit

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 18 AWG; Voltage (Rated): 600 V; Wire Cross Section: 1.5 mm2; Safety Approval: CSA; UL;

31398-1

Tyco Electronics Amp

RING TERMINAL; Wire Gauge: 16 AWG; Wire Cross Section: 1.65 mm2; Terminal Gender: FEMALE;

165565-1

TE Connectivity

TE Connectivity 165565-1 is a female push-on terminal with UL approval for 16 AWG wire, rated at 300V. Ideal for applications requiring a 1.5 mm2 wire cross-section, such as automotive and industrial electrical connections.

2091-1102/002-1000

Wago

BARRIER STRIP TERMINAL BLOCK;

1SNK710151R0000

Abb

MODULAR TERMINAL BLOCK; Mounting Type: DIN RAIL; Wire Gauge: 6 AWG; Wire Cross Section: 10 mm2; No. of Decks: 1; Safety Approval: UL;

MSTBVA2,5/6-G-5,08

Phoenix Contact

Phoenix Contact's MSTBVA2,5/6-G-5,08 is a 1-row strip terminal block with 6 ways and rated for 12A current at 320V. It accepts wire gauge up to 13 AWG with wire cross section of 2.5mm², suitable for board mounting applications requiring CB, CSA, CUL, EAC, UL, VDE safety approvals.

1041880210

Molex

Molex 1041880210 is a UL-approved BARRIER STRIP TERMINAL BLOCK for BOARD mounting. It supports 18 AWG wire gauge, rated at 300V/9A, with 2 ways. Ideal for industrial applications requiring secure electrical connections.

MS-25036-153

Molex

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; No. of Ways: 1; Wire Cross Section: 2.08 mm2;

1-152

Bel Fuse

Bel Fuse 1-152 is a CSA/UL approved barrier strip terminal block with 2 rows, rated for 250V voltage and 70A current. Ideal for applications requiring secure wire connections using screw fastening method with 6 AWG wire gauge support.

851

Zierick Manufacturing

RING TERMINAL;

1-320551-3

TE Connectivity

TE Connectivity 1-320551-3 is a UL-approved FEMALE RING TERMINAL for 20 AWG wire with a rated voltage of 300V. It has a wire cross section of 0.6 mm2, making it ideal for various electrical applications requiring secure connections.

2002-1401

Wago

The Wago 2002-1401 is a DIN RAIL mounted MODULAR TERMINAL BLOCK with 12 AWG wire gauge, rated for 800V and 32A current. Featuring a spring-loaded fastening method, it supports up to 4mm2 wire cross-section. Ideal for industrial applications requiring secure electrical connections in limited space.

MS25036-123

TE Connectivity

RING TERMINAL; Wire Gauge: 4 AWG; Wire Cross Section: 26.7 mm2; Safety Approval: UL; No. of Ways: 1;

MS25036-102

Defense Logistics Agency

RING TERMINAL; Additional Features: MATERIAL: COPPER; INSULATION: NYLON; Wire Gauge: 16 AWG; Voltage (Rated): 300 V; No. of Ways: 1; Wire Cross Section: 1.42 mm2;