Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

3354

Manufacturer

Advanced Interconnections
Manufacturer's Part Number

3354
Description

PCB TERMINAL; Terminal Gender: FEMALE;
Datasheet

Datasheet

Not In Stock

Popular Products

1N4148WT

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358D-T

NXP Semiconductors

LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.

Details

EU2B-YS2J03C

Idec

ROTARY SWITCH;

Details

BAV99

Philips Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

RC0603FR-071KL

Yageo

Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.

Details

BAV99

Micro Commercial Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

STM32H753ZIT6

STMicroelectronics

STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.

Details

LM555CN

Texas Instruments

LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.

Details

SMBJ18CA

Alpha & Omega Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

C0805C104K5RACTU

KEMET Corporation

KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.

Details

LM2931AZ-5.0RAG

Onsemi

LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.

Details

NE555D

Texas Instruments

NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.

Details

261

New England Microwave

Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;

Details

SS14

Changzhou Galaxy Century Microelectronics

RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;

Details

LM107H

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;

Details

BSS138

Inter F E T

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;

Details

ULN2803ADWR

Texas Instruments

ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.

Details

06035C103KAT2A

KYOCERA AVX

06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.

Details

EPCS4SI8N

Intel

EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.

Details

3354 Technical Details

TYPE	DESCRIPTION
Terminal Gender:	Female
Product Type:	PCB Terminal

Category Top Products

MS-25036-154

Abb Installation Products

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Wire Cross Section: 2 mm2; Safety Approval: UL;

1843224

Phoenix Contact

The Phoenix Contact 1843224 is a UL-approved barrier strip terminal block with 160V rated voltage and 8A rated current. It features a board mounting type and connector fastening method, suitable for applications requiring secure electrical connections in industrial settings.

1SNK710151R0000

Abb

MODULAR TERMINAL BLOCK; Mounting Type: DIN RAIL; Wire Gauge: 6 AWG; Wire Cross Section: 10 mm2; No. of Decks: 1; Safety Approval: UL;

36160

TE Connectivity

TE Connectivity 36160 is a UL-approved FEMALE RING TERMINAL for 14 AWG wire with a rated voltage of 300V. Featuring a wire cross section of 2.62 mm2, it is ideal for electrical connections in various applications requiring secure and reliable terminal blocks.

1840405

Phoenix Contact

The Phoenix Contact 1840405 is a BARRIER STRIP TERMINAL BLOCK with 6 ways, rated for 8A current and 160V voltage. It uses SCREW fastening method and supports wire gauge up to 16 AWG. Ideal for BOARD mounting, it has safety approvals from CB, CCA, CSA, CUL, GOST, and UL.

4226

Advanced Interconnections

PCB TERMINAL; Terminal Gender: FEMALE;

MKDSN1,5/3-5,08

Phoenix Contact

The Phoenix Contact MKDSN1,5/3-5,08 is a barrier strip terminal block with 3 ways and rated for 13.5A current at 400V voltage. It features a fastening method using screws and accepts wire gauge up to 16 AWG. Ideal for board mounting applications, it holds safety approvals from CB, CUL, DNVGL, EAC, SEV, and UL.

1725390000

Weidmueller & Kg

The Weidmueller & Kg 1725390000 is a 2-row strip terminal block with 48 ways. Rated for 300V and 10A, it has safety approvals from CSA, IEC, UL, VDE. Designed for board mounting using connectors, it's ideal for industrial applications requiring secure electrical connections.

2092-1323

Wago

BARRIER STRIP TERMINAL BLOCK;

2-520405-2

TE Connectivity

TE Connectivity 2-520405-2 is a UL-approved PUSH-ON TERMINAL for 18 AWG wire, rated at 600V. With 0.82 mm2 wire cross section, it's ideal for FEMALE terminals in various applications like automotive and industrial electronics.

33466

Weidmueller & Kg

RING TERMINAL; Wire Gauge: 6 AWG; Safety Approval: UL; No. of Ways: 1; Wire Cross Section: 16.8 mm2; Terminal Gender: FEMALE;

1935174

Phoenix Contact

The Phoenix Contact 1935174 is a UL-approved BARRIER STRIP TERMINAL BLOCK for BOARD mounting. It supports wire gauge up to 14 AWG with a rated voltage of 250V and current of 17.5A, suitable for applications requiring secure connections in industrial control systems.

2-36154-2

TE Connectivity

TE Connectivity's 2-36154-2 is a UL-approved RING TERMINAL for 16 AWG wire, rated at 300V. With a wire cross section of 1.65 mm2, it is ideal for female terminals in various applications requiring secure electrical connections.

MPT0,5/2-2,54

Phoenix Contact

Phoenix Contact's MPT0,5/2-2,54 is a 2-way barrier strip terminal block with a rated current of 6A and voltage of 160V. It supports wire gauge up to 20 AWG and wire cross-section of 0.5mm². Ideal for board mounting applications, it holds safety approvals from CSA, CUL, EAC, and UL.

MINIMCR-2-UI-UI

Phoenix Contact

MODULAR TERMINAL BLOCK;

7690

Keystone Electronics

POWER TERMINAL; Additional Features: MATERIAL: BRASS;

MS25036-103

Panduit

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 18 AWG; Voltage (Rated): 600 V; Wire Cross Section: 1.5 mm2; Safety Approval: CSA; UL;

2-34124-1

TE Connectivity

RING TERMINAL; Wire Gauge: 16 AWG; Terminal Gender: FEMALE; No. of Ways: 1; Safety Approval: UL; Wire Cross Section: 2 mm2;

1733570

Phoenix Contact

Phoenix Contact 1733570 is a UL-approved BARRIER STRIP TERMINAL BLOCK for BOARD mounting. It supports wire gauge up to 14 AWG with rated voltage of 250V and current of 17.5A. Ideal for applications requiring secure electrical connections in industrial settings.

MS25036-148

TE Connectivity

TE Connectivity's MS25036-148 is a UL-approved 16 AWG ring terminal with a 300V rating. Featuring a wire cross section of 1.42 mm2, it is ideal for female terminals in various applications requiring reliable electrical connections.