Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

221-412/K194-4045

Manufacturer

Wago
Manufacturer's Part Number

221-412/K194-4045
Description

BARRIER STRIP TERMINAL BLOCK; Mounting Type: CABLE; Fastening Method: PUSH-IN; Additional Features: STANDARD: UL94V-2; Wire Gauge: 12 AWG; Voltage (Rated): 450 V;
Datasheet

Datasheet

Not In Stock

Popular Products

1N4148WS

Continental Device India

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MMBT3906LT1G

Onsemi

MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.

Details

1N4148

Jgd Semiconductors

RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;

Details

SMBJ18CA

Silicon Standard

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Sprague Electric

RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;

Details

LM317T

Texas Instruments

LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.

Details

LL4148

Diodes Incorporated

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

2N7002

Inter F E T

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;

Details

LM555CM

Texas Instruments

LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.

Details

STM32F405RGT6TR

STMicroelectronics

STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.

Details

BAV99

Gec Plessey Semiconductors

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ERJ6ENF10R0V

Panasonic

Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.

Details

BAV99

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Transys Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

RN41N-I/RM

Microchip Technology

Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.

Details

BAV99

Nexperia

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WT

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

EU2B-YS303C

Idec

ROTARY SWITCH;

Details

2N7002-7-F

Diodes Incorporated

Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.

Details

LAN8720AI-CP-TR

Standard Microsystems

ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;

Details

221-412/K194-4045 Technical Details

TYPE	DESCRIPTION
Mounting Style:	Cable
Other Names:	0221-0412/K194-4045/0000-0100 221-412 2946-221-412/K194-4045 60267605
Total Ways:	2
Total Rows:	1
Fastening Style:	Push-In
Wire Gauge:	12 AWG
Total Decks:	1
Rated Voltage:	450 V
Wire Cross Section:	4 mm²
Product Type:	Barrier Strip Terminal Block
Safety Compliance:	UL
Additional Features:	Standard: UL 94V-2
Rated Current:	32 A

Category Top Products

731

Zierick Manufacturing

POWER TERMINAL; Additional Features: MATERIAL: BRASS, TIN PLATED; Current (Rated): 30 A;

282-901

Wago

The Wago 282-901 is a DIN RAIL mounted MODULAR TERMINAL BLOCK with 2 rows, rated for 30A current and 600V voltage. Featuring SPRING LOADED fastening, it accommodates wire gauge up to 10 AWG (6 mm2) and holds CSA/UL safety approvals. Ideal for industrial applications requiring secure electrical connections.

1-796634-2

TE Connectivity

TE Connectivity 1-796634-2 is a UL-approved strip terminal block with 12 ways, rated for 15A current and 300V voltage. It accommodates 12 AWG wire gauge with a cross-section of 3mm², mounted via screws on cables. Ideal for various applications requiring secure electrical connections.

640907-2

Tyco Electronics Amp

PUSH-ON TERMINAL; Wire Gauge: 10 AWG; Voltage (Rated): 300 V; Safety Approval: UL; Terminal Gender: FEMALE; Wire Cross Section: 6.64 mm2;

52044-2

Tyco Electronics Amp

RING TERMINAL; Wire Gauge: 2 AWG; Voltage (Rated): 600 V; Safety Approval: UL; Wire Cross Section: 35 mm2; Terminal Gender: FEMALE;

19017-0005

Molex

PUSH-ON TERMINAL; Wire Gauge: 18 AWG; Terminal Gender: FEMALE; Manufacturer Series: 19017; Wire Cross Section: .8 mm2;

6-796634-2

TE Connectivity

TE Connectivity 6-796634-2 is a UL-approved barrier strip terminal block with 12 AWG wire gauge, rated for 300V and 15A current. It features a screw fastening method and accommodates wire cross sections up to 3 mm². Ideal for applications requiring secure electrical connections in industrial settings.

1840395

Phoenix Contact

Phoenix Contact 1840395 is a modular terminal block with 5 ways, rated for 8A current and 160V voltage. It accepts wire gauge up to 16 AWG (1.5 mm2) and is UL approved for safety. Ideal for cable mounting applications requiring secure screw fastening.

2-2141598-2

TE Connectivity

TE Connectivity 2-2141598-2 is a TAB TERMINAL with UL approval, suitable for 13 AWG wire. It has a current rating of 30A and accommodates wires up to 2.5 mm². Ideal for male terminals in various applications requiring secure electrical connections.

MCV1,5/4-G-3,5

Phoenix Contact

The Phoenix Contact MCV1,5/4-G-3,5 is a 4-way barrier strip terminal block with a rated voltage of 160V and current of 8A. It supports wire gauge up to 15 AWG and wire cross-section of 1.5mm2, making it ideal for board mounting applications requiring secure connections. Safety approvals include CB, CSA, CUL, EAC, UL, and VDE.

1-320551-3

Tyco Electronics Amp

RING TERMINAL; Wire Gauge: 20 AWG; Voltage (Rated): 300 V; Wire Cross Section: .6 mm2; Safety Approval: UL; Terminal Gender: FEMALE;

1SNK510150R0000

Abb

MODULAR TERMINAL BLOCK; Mounting Type: DIN RAIL; Wire Gauge: 4 AWG; Safety Approval: UL; Wire Cross Section: 16 mm2; No. of Ways: 1;

10-520-3-01

Concord Electronics

PCB TERMINAL;

1827127

Phoenix Contact

The Phoenix Contact 1827127 is a Barrier Strip Terminal Block with 2 ways, rated for 8A current and 160V voltage. It has safety approvals from CB, CSA, CUL, EAC, EN, UL, VDE. Ideal for connecting wires of 1.5mm² cross-section using screw fastening in applications requiring secure electrical connections.

MS25036-149

TE Connectivity

TE Connectivity's MS25036-149 is a CSA/UL approved FEMALE RING TERMINAL for 16 AWG wire with 300V rating. Ideal for applications requiring secure electrical connections in terminals & terminal blocks.

KUX6WWCMT

Eaton Corporation

Eaton Corporation's KUX6WWCMT is a 2-row BARRIER STRIP TERMINAL BLOCK with 6 ways, rated for 60A current and 600V voltage. It uses SCREW fastening method and supports 6 AWG wire gauge. Ideal for CABLE mounting applications, it holds CSA and UL safety approvals.

2-33457-2

TE Connectivity

RING TERMINAL; Wire Gauge: 10 AWG; Wire Cross Section: 6 mm2; Safety Approval: UL; Terminal Gender: FEMALE; No. of Ways: 1;

1703661

Phoenix Contact

The Phoenix Contact 1703661 is a PANEL-mount BARRIER STRIP TERMINAL BLOCK with UL safety approval. It supports wire gauge up to 6 AWG and voltage rating of 1000 V, making it ideal for high-current applications requiring secure connections. With a rated current of 76 A and 7 ways, it accommodates wire cross sections up to 16 mm2 efficiently.

64320-3311

Molex

FORK TERMINAL;

MKDS1,5/3-5,08

Phoenix Contact

Phoenix Contact MKDS1,5/3-5,08 is a BARRIER STRIP TERMINAL BLOCK with 1.5mm2 wire cross section and 400V rated voltage. It supports up to 17.5A current, suitable for BOARD mounting in various applications requiring CCA, CSA, CUL, GOST, SEV, and UL safety approvals.