Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

640907-1

Manufacturer

TE Connectivity
Manufacturer's Part Number

640907-1
Description

PUSH-ON TERMINAL; Wire Gauge: 10 AWG; Voltage (Rated): 300 V; Safety Approval: UL; Terminal Gender: FEMALE; Wire Cross Section: 6.64 mm2;
Datasheet

Datasheet

Not In Stock

Popular Products

LL4148

Panjit International

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

CRCW06031K00FKEAHP

Vishay Intertechnology

Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.

Details

1N4148

Kec

RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;

Details

C0603X104K5RACAUTO

KEMET Corporation

C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.

Details

BAV99+

Multicomp Pro

BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.

Details

2N2222A

Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

2N2222A

Crystalonics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

SMMBT3904LT1G

Onsemi

SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.

Details

SMBJ18CA

Pulse Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Semitron

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM317T

Inchange Semiconductor

Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;

Details

1N4148WS

Dc Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM555CN

Fairchild Semiconductor

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;

Details

BSS138

Yangzhou Yangjie Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;

Details

SMBJ18CA

World Products

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM107H

Rochester Electronics

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;

Details

LD1117S33CTR

STMicroelectronics

STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.

Details

2N2222A

ROHM

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;

Details

NDT2955

Onsemi

NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.

Details

2N7002

Bytesonic Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;

Details

640907-1 Technical Details

TYPE	DESCRIPTION
Wire Cross Section:	6.64 mm²
Terminal Gender:	Female
Product Type:	Push-On Terminal
Safety Compliance:	UL
Wire Gauge:	10 AWG
Rated Voltage:	300 V

Category Top Products

221-415/VE00-1000

Wago

Wago 221-415/VE00-1000 is a BARRIER STRIP TERMINAL BLOCK with 5 ways, rated for 20A current and 600V voltage. It supports wire gauge up to 12 AWG and wire cross section of 4 mm2. Ideal for CABLE mounting applications, it holds safety approvals like ABS, CUL, EN/EC, PSE, UL.

52422-1

TE Connectivity

TE Connectivity's 52422-1 is a UL-approved FORK TERMINAL for 14 AWG wire, rated at 300V. With a wire cross section of 2 mm2, it is designed for FEMALE terminals in various applications.

MC1,5/3-ST-3,81

Phoenix Contact

Phoenix Contact MC1,5/3-ST-3,81 is a 3-way barrier strip terminal block with 1.5mm2 wire cross section and 8A rated current. It is mounted on board using screws and has safety approvals like CB, CUL, UL. Ideal for applications requiring secure electrical connections at 160V voltage rating.

PN14-14F-C

Panduit

FORK TERMINAL; Wire Gauge: 14 AWG; Terminal Gender: FEMALE;

3522

Keystone Electronics

PCB TERMINAL; Terminal Gender: FEMALE;

4-164

Bel Fuse

The Bel Fuse 4-164 is a 2-row BARRIER STRIP TERMINAL BLOCK with CSA and UL safety approvals. It supports up to 15A current at 250V rated voltage for 14 AWG wire gauge. Ideal for applications requiring secure electrical connections in industrial settings.

2-520263-2

TE Connectivity

TE Connectivity's 2-520263-2 is a UL-approved PUSH-ON TERMINAL for 18 AWG wire with 600V rating. Ideal for FEMALE terminals, it supports 0.82 mm2 wire cross section in various applications.

1273-1

Winchester Interconnect

PCB TERMINAL; Manufacturer Series: 1273; Terminal Gender: MALE;

733-368

Wago

Wago's 733-368 strip terminal block has 8 ways, rated for 4A current and 150V voltage. It is a single-row board-mounted connector with safety approvals from ABS, CCA, CSA, DNVGL, EN, and IEC. Ideal for various applications requiring secure electrical connections.

1843606

Phoenix Contact

The Phoenix Contact 1843606 is a UL-approved BARRIER STRIP TERMINAL BLOCK with 160V rated voltage and 8A current. It features a BOARD mounting type and CONNECTOR fastening method, suitable for applications requiring secure electrical connections in limited space environments.

3571

Keystone Electronics

TAB TERMINAL;

3044076

Phoenix Contact

Phoenix Contact 3044076 is a Strip Terminal Block with 2 Rows, rated for 600V/20A. It supports wire gauge up to 12 AWG and wire cross section of 2.5mm². Ideal for CABLE mounting applications, it holds safety approvals from CSA, UL, and VDE.

18721-50

Beau Interconnect

BARRIER STRIP TERMINAL BLOCK; Mounting Type: CABLE; Fastening Method: SCREW; Additional Features: PANEL MOUNT, PHENOLIC, 94V-0; Wire Gauge: 12 AWG; Voltage (Rated): 300 V;

1733651

Phoenix Contact

Phoenix Contact 1733651 is a BARRIER STRIP TERMINAL BLOCK with 10 ways, rated for 17.5A current and 400V voltage. It uses SCREW fastening method and supports wire gauge up to 14 AWG. Ideal for BOARD mounting, it has safety approvals from CB, CCA, CSA, CUL, GOST, and UL.

744-303/000-007

Wago

BARRIER STRIP TERMINAL BLOCK;

MS25036-105

Defense Logistics Agency

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 18 AWG; Voltage (Rated): 600 V; Safety Approval: CSA; UL; Wire Cross Section: 1.5 mm2;

830

Keystone Electronics

WIRE TERMINAL;

1725669

Phoenix Contact

Phoenix Contact 1725669 is a BARRIER STRIP TERMINAL BLOCK with 3 ways, rated for 6A current and 63V voltage. It uses SCREW fastening method, supports wire gauge up to 20 AWG, and wire cross section of 0.5 mm2. Ideal for BOARD mounting applications with CSA and UL safety approvals.

4-796634-2

TE Connectivity

TE Connectivity 4-796634-2 is a UL-approved strip terminal block with 11 ways. It supports 12 AWG wire gauge, 3 mm2 wire cross section, and rated for 300V/15A. Ideal for cable mounting applications requiring secure screw fastening.

1755752

Phoenix Contact

The Phoenix Contact 1755752 is a STRIP TERMINAL BLOCK with 4 ways and a rated voltage of 320V. It has a fastening method of CONNECTOR and can handle a current of up to 12A. This terminal block is suitable for BOARD mounting and has safety approvals from CB, CSA, CUL, EAC, EN, UL, and VDE.