Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

1643

Manufacturer

Advanced Interconnections
Manufacturer's Part Number

1643
Description

PCB TERMINAL; Terminal Gender: FEMALE;
Datasheet

Datasheet

Not In Stock

Popular Products

2N7002

Yangzhou Yangjie Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;

Details

2N7002

Taitron Components

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;

Details

2N7002,215

NXP Semiconductors

2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.

Details

2N2222A

Semiconductor Technology

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

BAV99WT1G

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

STMicroelectronics

RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);

Details

1N4148

Shenzhen Yixinsemi Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

ERJ6ENF10R0V

Panasonic

Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.

Details

SMBJ18CA

Uniohm

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138

North American Philips Discrete Products Div

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;

Details

C0603C104K5RACTU

KEMET Corporation

KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.

Details

DS18B20U+

Analog Devices

DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.

Details

NE555D

NXP Semiconductors

SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

1N4148

Diotec Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148WS

Lite-on Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Continental Device India

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BSS138

Philips Semiconductors

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;

Details

LL4148

First Components International

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

2N2222A

National Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;

Details

LM358N

Intersil

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

1643 Technical Details

TYPE	DESCRIPTION
Terminal Gender:	Female
Terminal & Terminal Block Type:	PCB Terminal

Category Top Products

2060-402/998-404

Wago

Wago's 2060-402/998-404 is a BARRIER STRIP TERMINAL BLOCK for BOARD mounting. It has a rated voltage of 320V, current of 9A, and supports wire gauge up to 18 AWG. Ideal for applications requiring secure electrical connections in limited space.

1776231-1

TE Connectivity

BARRIER STRIP TERMINAL BLOCK; Terminal Gender: MALE; Safety Approval: UL;

MS-25036-103

Molex

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 18 AWG; Voltage (Rated): 600 V; Wire Cross Section: 1.5 mm2; Safety Approval: CSA; UL;

2-320563-3

TE Connectivity

TE Connectivity 2-320563-3 is a UL-approved RING TERMINAL for 16 AWG wire with 300V rating. Featuring female terminal gender, it suits applications requiring secure electrical connections in various industries.

796634-2

Tyco Electronics Amp

STRIP TERMINAL BLOCK; Mounting Type: CABLE; Fastening Method: SCREW; Additional Features: STANDARDS: IEC 998-1/998-2-1, PA 6-6, 94V-0, POLARIZED; Wire Gauge: 12 AWG; Voltage (Rated): 300 V;

8-796634-2

TE Connectivity

TE Connectivity's 8-796634-2 is a UL-approved BARRIER STRIP TERMINAL BLOCK with 21 ways. It supports wire gauge up to 12 AWG and rated voltage of 300V, handling current up to 15A. Ideal for applications requiring secure electrical connections in industrial settings.

282834-2

Tyco Electronics Amp

MODULAR TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Wire Gauge: 16 AWG; Voltage (Rated): 150 V; Safety Approval: UL;

327583

TE Connectivity

BUTT TERMINAL; Wire Gauge: 14 AWG; Terminal Gender: FEMALE; Wire Cross Section: 2.62 mm2; Safety Approval: UL;

624

TE Connectivity

MODULAR TERMINAL BLOCK; Fastening Method: SCREW; Additional Features: NYLON; Wire Gauge: 8 AWG; Voltage (Rated): 300 V; Current (Rated): 50 A;

4-796634-2

TE Connectivity

TE Connectivity 4-796634-2 is a UL-approved strip terminal block with 11 ways. It supports 12 AWG wire gauge, 3 mm2 wire cross section, and rated for 300V/15A. Ideal for cable mounting applications requiring secure screw fastening.

325308

TE Connectivity

WIRE TERMINAL; Wire Gauge: 0 AWG; Wire Cross Section: 60 mm2; Terminal Gender: FEMALE; Safety Approval: UL;

2-320563-2

TE Connectivity

TE Connectivity 2-320563-2 is a UL-approved RING TERMINAL for 14 AWG wire, rated at 300V. With a wire cross section of 2 mm2, it's ideal for female terminals in various applications.

1933189

Phoenix Contact

Phoenix Contact 1933189 is a UL-approved strip terminal block with 250V rated voltage and 12A current. It has 2 ways, mounts on board using connector fastening method. Ideal for industrial applications requiring secure electrical connections.

19070-0123

Molex

RING TERMINAL; Wire Gauge: 10 AWG; Wire Cross Section: 5 mm2; Terminal Gender: FEMALE; Manufacturer Series: 19070;

PN14-14F-C

Panduit

FORK TERMINAL; Wire Gauge: 14 AWG; Terminal Gender: FEMALE;

51864-2

TE Connectivity

RING TERMINAL; Additional Features: MATERIAL: POLYAMIDE; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; No. of Ways: 1; Wire Cross Section: 2.08 mm2;

231-532/001-000

Wago

STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: CONNECTOR; Additional Features: STANDARD: 94V-0, POLYAMIDE66, SAFETY APPROVAL: IEC; KEMA; KEUR; UL; Voltage (Rated): 600 V; No. of Ways: 2;

1196

Zierick Manufacturing

WIRE TERMINAL; Manufacturer Series: 1196;

1702473

Phoenix Contact

Phoenix Contact 1702473 is a BARRIER STRIP TERMINAL BLOCK with 2 ways, rated for 6A current and 160V voltage. It uses SPRING LOADED fastening method and supports wire gauge up to 20 AWG (0.5 mm2). Ideal for BOARD mounting, it holds EAC and UL safety approvals, suitable for various terminal applications.

33466-1

TE Connectivity

RING TERMINAL; Wire Gauge: 6 AWG; Wire Cross Section: 15 mm2; No. of Ways: 1; Safety Approval: UL;