Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

1715022

Manufacturer

Phoenix Contact
Manufacturer's Part Number

1715022
Description

MODULAR TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Additional Features: POLYAMIDE, 94V-2; Wire Gauge: 14 AWG; Voltage (Rated): 250 V;
Datasheet

Datasheet

Not In Stock

Popular Products

LM555CM

Intersil

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

BAV99

Continental Device India

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM107H/883C

National Semiconductor

LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.

Details

2N2222A

Semicoa

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

1N4148

Unitrode

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM358MX

Texas Instruments

LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.

Details

BSS138-7-F

SPC TECHNOLOGY/ MULTICOMP

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;

Details

1N4148

Central Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LL4148

Sinyork

RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;

Details

2N2222A

Raytheon Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;

Details

MBRS130LT3G

Onsemi

MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.

Details

LL4148

Kec

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

1N4148WT

Changzhou Galaxy Century Microelectronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ULN2803A

Motorola

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;

Details

2N2222A

New England Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

LM358MX

Onsemi

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

2N7002

Motorola

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;

Details

MBR1560CT

General Instrument

MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.

Details

1N4148

Silicon Standard

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

RC0603FR-0710KL

Yageo

Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.

Details

1715022 Technical Details

TYPE	DESCRIPTION
Mounting Style:	Board
Other Names:	277-1258 MKDS 1.5/2 MKDS1,5/2
Total Ways:	2
Total Rows:	1
Fastening Style:	Screw
Wire Gauge:	14 AWG
Total Decks:	1
Rated Voltage:	250 V
Wire Cross Section:	2.5 mm²
Product Type:	Modular Terminal Block
Safety Compliance:	CSA; UL
Additional Features:	PA, 94V-2
Rated Current:	22 A

Category Top Products

MCV1,5/2-G-3,5

Phoenix Contact

Phoenix Contact's MCV1,5/2-G-3,5 is a 4-way barrier strip terminal block with 1.5mm2 wire cross section and 15 AWG wire gauge. Rated for 8A current and 160V voltage, it is ideal for board mounting applications requiring CB, CSA, CUL, EAC, UL, VDE safety approvals.

1-321235-1

TE Connectivity

PUSH-ON TERMINAL; Wire Gauge: 10 AWG; Safety Approval: UL; Wire Cross Section: 6 mm2; Terminal Gender: FEMALE;

MINIMCR-2-UI-UI

Phoenix Contact

MODULAR TERMINAL BLOCK;

MS25036-150

Panduit

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 18 AWG; Voltage (Rated): 600 V; Wire Cross Section: 1.5 mm2; Safety Approval: CSA; UL;

39-00-0430

Molex

RING TERMINAL; Wire Gauge: 18 AWG; Terminal Gender: MALE; Manufacturer Series: 5558;

517

TE Connectivity

MODULAR TERMINAL BLOCK; Additional Features: PHENOLIC; Wire Gauge: 12 AWG; Voltage (Rated): 300 V; Current (Rated): 20 A; Manufacturer Series: 517;

282834-8

Tyco Electronics Amp

MODULAR TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Wire Gauge: 16 AWG; Voltage (Rated): 150 V; No. of Ways: 8;

1-726388-2

TE Connectivity

TAB TERMINAL; Terminal Gender: MALE; Safety Approval: UL;

MS-25036-146

Molex

RING TERMINAL; Terminal Gender: FEMALE; Manufacturer Series: MS-25036;

282834-3

Tyco Electronics Amp

MODULAR TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Wire Gauge: 16 AWG; Voltage (Rated): 150 V; No. of Decks: 1;

51863-1

Tyco Electronics Amp

RING TERMINAL; Wire Gauge: 16 AWG; Voltage (Rated): 300 V; Wire Cross Section: 1.42 mm2; Safety Approval: UL; No. of Ways: 1;

222-413/VE00-2500

Wago

Wago 222-413/VE00-2500 is a BARRIER STRIP TERMINAL BLOCK with 3 ways, rated for 20A current and 600V voltage. It supports wire gauge up to 12 AWG and wire cross section of 3.31 mm2, suitable for CABLE mounting applications with safety approvals like ABS, CUL, EN/EC, PSE, UL.

1SNK710151R0000

Abb

MODULAR TERMINAL BLOCK; Mounting Type: DIN RAIL; Wire Gauge: 6 AWG; Wire Cross Section: 10 mm2; No. of Decks: 1; Safety Approval: UL;

1SNK705062R0000

Abb

MODULAR TERMINAL BLOCK; Mounting Type: DIN RAIL; Wire Gauge: 12 AWG; Voltage (Rated): 600 V; Safety Approval: UL; Wire Cross Section: 2.5 mm2;

282834-4

TE Connectivity

TE Connectivity 282834-4 is a modular terminal block with 4 ways, rated for 10A current and 150V voltage. It uses screw fastening method and supports wire gauge up to 16 AWG. Ideal for board mounting applications with UL safety approval.

1840395

Phoenix Contact

Phoenix Contact 1840395 is a modular terminal block with 5 ways, rated for 8A current and 160V voltage. It accepts wire gauge up to 16 AWG (1.5 mm2) and is UL approved for safety. Ideal for cable mounting applications requiring secure screw fastening.

2103

Advanced Interconnections

PCB TERMINAL; Manufacturer Series: 2103; Terminal Gender: FEMALE;

34130

Weidmueller & Kg

WIRE TERMINAL;

MSTBVA2,5/4-G-5,08

Phoenix Contact

Phoenix Contact's MSTBVA2,5/4-G-5,08 is a 4-way strip terminal block with a rated voltage of 320V and current of 12A. It is approved by CB, CSA, CUL, EAC, EN, UL, VDE for safety. Ideal for board mounting applications using connector fastening method.

1843622

Phoenix Contact

Phoenix Contact 1843622 is a modular terminal block with 4 ways, rated for 8A current and 160V voltage. It has UL, VDE, CSA safety approvals and accepts wire gauge up to 15 AWG. Ideal for board mounting applications, it features a fastening method of solder and accommodates wire cross sections of 1.5 mm².