Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

640903-2

Manufacturer

Tyco Electronics Amp
Manufacturer's Part Number

640903-2
Description

PUSH-ON TERMINAL; Wire Gauge: 18 AWG; Voltage (Rated): 300 V; Terminal Gender: FEMALE; Wire Cross Section: .96 mm2; Safety Approval: UL;
Datasheet

Datasheet

Not In Stock

Popular Products

CRG0805F10R

TE Connectivity

TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.

Details

2N2222A

Microchip Technology

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;

Details

LM107H

Advanced Micro Devices

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;

Details

1N4148

Hy Electronic

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

M24308/2-1F

Cristek Interconnects

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;

Details

USB2514BI-AEZG

Microchip Technology

USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.

Details

ULN2803A

Onsemi

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;

Details

LM107H/883

Advanced Micro Devices

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;

Details

LL4148

Vishay Intertechnology

Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.

Details

ABS25-32.768KHZ-T

Abracon

Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.

Details

2N2222A

General Transistor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

MBRS1100T3G

Onsemi

MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.

Details

BAV99

Sangdest Microelectronics (Nanjing)

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1552200253

Molex

WIRE AND CABLE;

Details

1N4148WS

Vishay Intertechnology

Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.

Details

1N4148

Invensys Sensor Systems

RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;

Details

MBRS340T3G

Onsemi

MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.

Details

LM358N

Philips Semiconductors

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

1N4148

Itt Components

RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;

Details

SMBJ18CA

Shenzhen Socay Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

640903-2 Technical Details

TYPE	DESCRIPTION
Wire Cross Section:	0.96 mm²
Terminal Gender:	Female
Product Type:	Push-On Terminal
Safety Compliance:	UL
Wire Gauge:	18 AWG
Rated Voltage:	300 V

Category Top Products

39357-0020

Molex

Molex 39357-0020 is a Barrier Strip Terminal Block with 20 ways, rated for 12A current and 300V voltage. It uses a screw fastening method, supports wire gauge up to 16 AWG, and has UL safety approval. Ideal for board mounting applications requiring secure electrical connections.

34137

TE Connectivity

BUTT TERMINAL; Wire Gauge: 14 AWG; Terminal Gender: FEMALE; Wire Cross Section: 2 mm2; Safety Approval: UL;

MS25036-152

Panduit

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Wire Cross Section: 2.62 mm2; No. of Ways: 1;

1755778

Phoenix Contact

Phoenix Contact 1755778 is a STRIP TERMINAL BLOCK with 6 ways, rated for 12A current and 320V voltage. It accepts wire gauge up to 13 AWG and wire cross section of 2.5mm², suitable for BOARD mounting applications requiring CB, CSA, CUL, EAC, UL, VDE safety approvals.

3210271

Phoenix Contact

MODULAR TERMINAL BLOCK;

36161

Tyco Electronics Amp

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 10 AWG; Voltage (Rated): 300 V; No. of Ways: 1; Safety Approval: UL;

39-00-0430

Molex

RING TERMINAL; Wire Gauge: 18 AWG; Terminal Gender: MALE; Manufacturer Series: 5558;

191640017

Molex

PUSH-ON TERMINAL; Wire Gauge: 18 AWG; Terminal Gender: FEMALE; Manufacturer Series: 19164; Wire Cross Section: 1.5 mm2;

1777989

Phoenix Contact

Phoenix Contact 1777989 is a BARRIER STRIP TERMINAL BLOCK with 2.5 mm2 wire cross section, rated for 12A current and 320V voltage. It has CB, CSA, CUL, DNVGL, EAC, RS safety approvals and uses SCREW fastening method. Ideal for connecting 12 AWG wires in various electrical applications.

77628-61

Beau Interconnect

BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Additional Features: LOW PROFILE, POLYETHYLENE, 94V-0; Wire Gauge: 12 AWG; Voltage (Rated): 300 V;

814

Keystone Electronics

WIRE TERMINAL;

4-172

Bel Fuse

Bel Fuse 4-172 is a UL-approved barrier strip terminal block with 2 rows, rated for 125V and 10A. Featuring a fastening screw method, it accommodates wire gauge up to 18 AWG (0.823 mm2) in a panel mount application.

34891

TE Connectivity

RING TERMINAL; Wire Gauge: 10 AWG; No. of Ways: 1; Safety Approval: UL; Wire Cross Section: 6 mm2;

1658670-1

Tyco Electronics Amp

WIRE TERMINAL; Wire Gauge: 22 AWG; Terminal Gender: MALE; Manufacturer Series: 1658670;

1877210000

Weidmueller & Kg

STRIP TERMINAL BLOCK;

640907-1

TE Connectivity

TE Connectivity 640907-1 is a UL-approved PUSH-ON TERMINAL for 10 AWG wire, rated at 300V. With a wire cross section of 6.64 mm2, it's ideal for applications requiring FEMALE terminals in various industries.

19002-0008

Molex

PUSH-ON TERMINAL; Wire Gauge: 18 AWG; Wire Cross Section: .8 mm2; Terminal Gender: FEMALE; Manufacturer Series: 19002;

1731734

Phoenix Contact

Phoenix Contact 1731734 is a UL-approved barrier strip terminal block with 3 ways, rated for 24A current and 500V voltage. It accommodates wire gauge up to 12 AWG and wire cross-section of 2.5mm², mounted on board using screw fastening method. Ideal for industrial applications requiring secure electrical connections.

1757268

Phoenix Contact

The Phoenix Contact 1757268 is a STRIP TERMINAL BLOCK with 1 row and 4 ways. It has a rated voltage of 320V, current of 12A, and can accommodate wire gauge up to 13 AWG. It is commonly used for board mounting in various applications requiring secure electrical connections.

MS-25036-112

Molex

Molex MS-25036-112 is a UL-approved RING TERMINAL with 10 AWG wire gauge and 300 V rated voltage. It has a wire cross section of 6.64 mm2 and is suitable for various applications requiring secure electrical connections.