Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

MSTB2,5/4-ST-5,08

Manufacturer

Phoenix Contact
Manufacturer's Part Number

MSTB2,5/4-ST-5,08
Description

BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Additional Features: STANDARD: UL 94V-0, PA; Wire Gauge: 12 AWG; Voltage (Rated): 320 V;
Datasheet

Not In Stock

Popular Products

SMBJ18CA

Changzhou Galaxy Century Microelectronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Siemens

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FT232RL-TUBE

FTDI

FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.

Details

SS14

Forward International Electronics

RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;

Details

FDV304P

Onsemi

The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.

Details

LM555CM

Fairchild Semiconductor

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

2N7002

Lite-on Semiconductor

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;

Details

BSS138K-13

Diodes Incorporated

BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.

Details

BAV99LT1G

Onsemi

BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.

Details

CL31B104KBCNNNC

Samsung Electro-mechanics

Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.

Details

1N4148WS

Jiangsu Changjiang Electronics Technology

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358N

Silicon Group

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

BAV99-7-F

Multicomp Pro

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Promax-johnton

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Comset Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

1N4148

Pro-an Electronic

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

M39029/58360

Esterline Technologies

CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;

Details

LM317D2TG

Onsemi

LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.

Details

EU2B-YS2J03F

Idec

ROTARY SWITCH;

Details

LIS3DHTR

STMicroelectronics

LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.

Details

MSTB2,5/4-ST-5,08 Technical Details

TYPE	DESCRIPTION
Mounting Style:	Board
Total Ways:	4
Wire Cross Section:	2.5 mm²
Product Type:	Barrier Strip Terminal Block
Safety Compliance:	CB; CSA; CUL; EAC; UL; VDE
Additional Features:	Standard: UL 94V-0, PA
Total Rows:	1
Fastening Style:	Screw
Rated Current:	12 A
Wire Gauge:	12 AWG
Total Decks:	1
Rated Voltage:	320 V

Category Top Products

2103

Advanced Interconnections

PCB TERMINAL; Manufacturer Series: 2103; Terminal Gender: FEMALE;

1840382

Phoenix Contact

The Phoenix Contact 1840382 is a modular terminal block with 4 ways, rated for 8A current and 160V voltage. It features screw fastening method and accepts wire gauge up to 16 AWG (1.5 mm²). Ideal for cable mounting applications, UL approved for safety compliance.

MCV1,5/4-G-3,81

Phoenix Contact

Phoenix Contact's MCV1,5/4-G-3,81 is a 4-way barrier strip terminal block with a rated voltage of 160V and current of 8A. It is approved by CB, CSA, CUL, EAC, EN, VDE, and UL for safety. Ideal for board mounting applications using connector fastening method.

1SNK705010R0000

TE Connectivity

TE Connectivity's 1SNK705010R0000 is a DIN RAIL modular terminal block with UL safety approval. Rated for 600V voltage, it supports 12 AWG wire gauge and 2.5mm2 wire cross section, handling up to 20A current. Ideal for industrial applications requiring secure electrical connections on DIN rails.

1725698

Phoenix Contact

Phoenix Contact 1725698 is a BARRIER STRIP TERMINAL BLOCK with 6 ways, rated for 6A current and 160V voltage. It has safety approvals from CSA, CUL, EAC, and UL. Ideal for BOARD mounting applications with wire gauge up to 20 AWG and wire cross section of 0.5 mm2.

231-340/001-000

Wago

Wago 231-340/001-000 is a STRIP TERMINAL BLOCK with 10 ways and rated for 630V, 12A. It has CCA, CSA, KEMA safety approvals and accepts wire cross section of 2.5mm². Ideal for BOARD mounting applications requiring secure connections with CONNECTOR fastening method.

870-590/281-676

Wago

MODULAR TERMINAL BLOCK;

19002-0005

Molex

PUSH-ON TERMINAL; Wire Gauge: 18 AWG; Terminal Gender: FEMALE; Wire Cross Section: .8 mm2;

970

Zierick Manufacturing

RING TERMINAL;

2061-602/998-404

Wago

Wago's 2061-602/998-404 is a BOARD-mounted BARRIER STRIP TERMINAL BLOCK with 16 AWG wire gauge, 300V rated voltage, and 1.5mm2 wire cross section. It features SPRING LOADED fastening method for secure connections in applications requiring up to 17.5A current across 2 ways, meeting IEC and UL safety standards.

236-402

Wago

The Wago 236-402 is a STRIP TERMINAL BLOCK for BOARD mounting, rated at 300V/15A. It supports wire gauge up to 12 AWG with wire cross section of 2.5 mm². Ideal for applications requiring CSA/UL safety approvals and fastening via SOLDER method in circuits with two ways.

2-320571-2

TE Connectivity

TE Connectivity 2-320571-2, a UL-approved RING TERMINAL for 16 AWG wire with 300V rating. Ideal for FEMALE terminals in applications requiring 1.42 mm² wire cross section.

2022-112/000-037

Wago

BARRIER STRIP TERMINAL BLOCK;

1945096

Phoenix Contact

The Phoenix Contact 1945096 is a STRIP TERMINAL BLOCK with 2 ways, rated for 250V and 8A. It is mounted on BOARD using CONNECTOR fastening method. This terminal block has safety approvals from CUL, EAC, and UL, making it ideal for various industrial applications requiring secure electrical connections.

MS25036-106

Defense Logistics Agency

FORK TERMINAL; Additional Features: NYLON; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Wire Cross Section: 2 mm2; Safety Approval: UL;

1787072

Phoenix Contact

Phoenix Contact 1787072 is a 2-row strip terminal block with 8 ways and rated voltage of 160V. It has CB, CUL, UL, VDE safety approvals and fastens via connector. Ideal for board and panel mounting, it handles up to 8A current making it suitable for various industrial applications.

MSTB2,5/4-ST-5,08

Not In Stock

Popular Products

SMBJ18CA

BAV99

FT232RL-TUBE

SS14

FDV304P

LM555CM

2N7002

BSS138K-13

BAV99LT1G

CL31B104KBCNNNC

1N4148WS

LM358N

BAV99-7-F

BAV99

2N2222A

1N4148

M39029/58360

LM317D2TG

EU2B-YS2J03F

LIS3DHTR

MSTB2,5/4-ST-5,08 Technical Details

Category Top Products

2103

1840382

MCV1,5/4-G-3,81

1SNK705010R0000

1725698

231-340/001-000

870-590/281-676

19002-0005

970

2061-602/998-404

236-402

2-320571-2

2022-112/000-037

1945096

MS25036-106

1787072

1217754-1

DRA1-CMX60D10

1082

19154-0022