Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

1-282834-2

Manufacturer

Tyco Electronics Amp
Manufacturer's Part Number

1-282834-2
Description

MODULAR TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Wire Gauge: 16 AWG; Voltage (Rated): 150 V; No. of Rows: 1;
Datasheet

Datasheet

Not In Stock

Popular Products

2N2222A

Forward International Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;

Details

LD1117S33CTR

STMicroelectronics

STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.

Details

DS18B20

Maxim Integrated

DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.

Details

KSZ9031RNXIA

Microchip Technology

KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.

Details

LM555CN

Texas Instruments

LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.

Details

BAV99

MICRODIODE ELECTRONICS SHENZHEN CO LTD

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Yangzhou Yangjie Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;

Details

CC0603KRX7R9BB104

Yageo

Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.

Details

1N4148

Diotec Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148

Microsemi

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

L7805CV

STMicroelectronics

L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.

Details

LM358N

Fairchild Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

BAV99

Toshiba

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Microchip Technology

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;

Details

LM555CN

Rochester Electronics

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;

Details

SMBJ18CA

Semitron

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

NC7WZ07P6X

Fairchild Semiconductor

BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;

Details

BSS138BK,215

NXP Semiconductors

NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.

Details

ULN2803A

Rochester Electronics

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;

Details

1N4148WT

Taitron Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1-282834-2 Technical Details

TYPE	DESCRIPTION
Mounting Style:	Board
Total Ways:	12
Product Type:	Modular Terminal Block
Safety Compliance:	UL
Total Rows:	1
Product Series:	282834
Fastening Style:	Screw
Rated Current:	10 A
Wire Gauge:	16 AWG
Total Decks:	1
Rated Voltage:	150 V

Category Top Products

1711026

Phoenix Contact

Phoenix Contact 1711026 is a modular terminal block for BOARD mounting with UL safety approval. It supports wire gauge up to 12 AWG and voltage rating of 250V, ideal for applications requiring a current rating of 24A in a compact design.

1757051

Phoenix Contact

The Phoenix Contact 1757051 Barrier Strip Terminal Block is rated for 320V voltage and 12A current, with a wire gauge of 12 AWG and wire cross section of 2.5mm². It features a connector mounting type with safety approvals from CB, CSA, CUL, GOST, UL, VDE. Ideal for applications requiring secure electrical connections in industrial settings.

18512-58

Molex

The Molex 18512-58 is a 2-row barrier strip terminal block with CSA and UL safety approvals. It supports 12 AWG wire gauge, rated for 300V voltage and 20A current. Ideal for board mounting applications requiring secure screw fastening in electrical connections up to 12 ways.

731

Zierick Manufacturing

POWER TERMINAL; Additional Features: MATERIAL: BRASS, TIN PLATED; Current (Rated): 30 A;

1827130

Phoenix Contact

The Phoenix Contact 1827130 is a UL-approved modular terminal block with a rated voltage of 160V and current of 8A. It accommodates wire gauges up to 16 AWG and wire cross-sections of 1.5mm2, featuring a screw fastening method for secure connections. Ideal for applications requiring a reliable connector solution in industrial settings.

20020008-D051B01LF

AMPHENOL ICC

The Amphenol Icc 20020008-D051B01LF is a UL-approved barrier strip terminal block with 5 ways, rated for 8A current and 300V voltage. It accommodates wire gauge up to 16 AWG and wire cross-section of 1.5 mm2. Ideal for applications requiring secure connections in electrical circuits.

722-232/031-000

Wago

Wago 722-232/031-000 is a modular terminal block with 2 ways, rated for 300V and 15A. It features board mounting and connector fastening method, approved by CSA and UL. Ideal for industrial applications requiring secure electrical connections in limited space.

19002-0001

Molex

PUSH-ON TERMINAL; Wire Gauge: 18 AWG; Wire Cross Section: .8 mm2; Terminal Gender: FEMALE;

2-320569-3

Tyco Electronics Amp

RING TERMINAL; Wire Gauge: 10 AWG; Voltage (Rated): 300 V; Safety Approval: UL; Terminal Gender: FEMALE; No. of Ways: 1;

66200113722DEC

Wuerth Elektronik & Kg

Terminals and Terminal Blocks;

851

Zierick Manufacturing

RING TERMINAL;

1-320551-3

TE Connectivity

TE Connectivity 1-320551-3 is a UL-approved FEMALE RING TERMINAL for 20 AWG wire with a rated voltage of 300V. It has a wire cross section of 0.6 mm2, making it ideal for various electrical applications requiring secure connections.

1-321235-1

TE Connectivity

PUSH-ON TERMINAL; Wire Gauge: 10 AWG; Safety Approval: UL; Wire Cross Section: 6 mm2; Terminal Gender: FEMALE;

320553

TE Connectivity

TE Connectivity 320553 is a UL-approved RING TERMINAL for 16 AWG wire, rated at 300V. With a wire cross section of 1.42 mm2, it's ideal for female terminals in various electrical applications.

MS25036-106

Panduit

FORK TERMINAL; Additional Features: NYLON; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Safety Approval: UL; No. of Ways: 1;

2-520194-2

TE Connectivity

TE Connectivity's 2-520194-2 is a UL-approved PUSH-ON TERMINAL for 18 AWG wire, rated at 600V. With 0.82 mm2 wire cross section, it is ideal for female terminals in various applications.

1379

Advanced Interconnections

PCB TERMINAL; Terminal Gender: FEMALE;

1840366

Phoenix Contact

Phoenix Contact 1840366 is a BARRIER STRIP TERMINAL BLOCK with 2 ways, rated for 8A current and 300V voltage. It accepts wire gauge up to 14 AWG (1.5 mm2) and is approved by CSA, UL, VDE. Ideal for CABLE mounting applications requiring secure connections.

35109

TE Connectivity

TE Connectivity 35109 is a UL-approved FEMALE RING TERMINAL for 10 AWG wire with a rated voltage of 300V. Featuring a wire cross section of 6.64 mm2, it is ideal for electrical connections in various applications requiring secure and reliable terminal blocks.

1714968

Phoenix Contact

Phoenix Contact 1714968 is a UL-approved barrier strip terminal block for boards. It supports wire gauge up to 10 AWG with 4 mm2 wire cross section and rated voltage of 500V. With fastening by screws, it has a current rating of 32A and offers 3 ways for secure connections in various applications.