Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

282834-3

Manufacturer

Tyco Electronics Amp
Manufacturer's Part Number

282834-3
Description

MODULAR TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Wire Gauge: 16 AWG; Voltage (Rated): 150 V; No. of Decks: 1;
Datasheet

Datasheet

Not In Stock

Popular Products

LL4148

Weitronic Enterprise

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LM358N

Texas Instruments

LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.

Details

BSS138LT1G

Onsemi

BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.

Details

BSS138

Sipex

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;

Details

1N4148WT

Continental Device India

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ULN2803A

Rochester Electronics

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;

Details

1N4148

Vicor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SMBJ18CA

Daco Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Dc Components

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Micro Commercial Components

Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;

Details

SS14

General Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

261

New England Microwave

Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;

Details

CRCW06031K00FKEAHP

Vishay Intertechnology

Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.

Details

RC0805FR-0710KL

Yageo

Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.

Details

MBRS130LT3G

Onsemi

MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.

Details

BAV99

Temic Semiconductors

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138

Yangzhou Yangjie Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;

Details

LL4148

Panjit International

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

SMBJ18CA

World Products

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ULN2803ADWG4

Texas Instruments

ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.

Details

282834-3 Technical Details

TYPE	DESCRIPTION
Mounting Style:	Board
Total Ways:	3
Product Type:	Modular Terminal Block
Safety Compliance:	UL
Total Rows:	1
Product Series:	282834
Fastening Style:	Screw
Rated Current:	10 A
Wire Gauge:	16 AWG
Total Decks:	1
Rated Voltage:	150 V

Category Top Products

MS25036-103

TE Connectivity

TE Connectivity's MS25036-103 is a UL-approved ring terminal with a wire gauge of 16 AWG and a rated voltage of 300V. It is suitable for applications requiring a single-way connection, with a wire cross section of 1.65 mm2.

1757035

Phoenix Contact

Phoenix Contact 1757035 is a BARRIER STRIP TERMINAL BLOCK with 4 ways, rated for 12A current and 320V voltage. It accepts wire gauge up to 12 AWG with wire cross section of 2.5 mm2, mounted on board using screws. Safety approved by CB, CSA, CUL, EAC, UL, VDE for various industrial applications.

350537-6

Tyco Electronics Amp

WIRE TERMINAL; Wire Gauge: 14 AWG; Wire Cross Section: 2 mm2; Manufacturer Series: 350537; Terminal Gender: FEMALE;

1952270

Phoenix Contact

The Phoenix Contact 1952270 is a UL-approved barrier strip terminal block with a rated voltage of 160V and current of 8A. It accommodates wire gauge up to 16 AWG and wire cross-section of 1.5mm2, suitable for applications requiring secure cable mounting in industrial settings.

1658670-1

Tyco Electronics Amp

WIRE TERMINAL; Wire Gauge: 22 AWG; Terminal Gender: MALE; Manufacturer Series: 1658670;

MS25036-101

Amphenol Communications Solutions

RING TERMINAL; Wire Gauge: 16 AWG; Voltage (Rated): 300 V; Wire Cross Section: 1.42 mm2; Safety Approval: UL; No. of Ways: 1;

34148

Tyco Electronics Amp

RING TERMINAL; Additional Features: VINYL; Wire Gauge: 16 AWG; Voltage (Rated): 600 V; Safety Approval: UL; Wire Cross Section: 1.65 mm2;

M81824/1-1

Tri-star Electronics International

WIRE TERMINAL; Wire Gauge: 20 AWG; Manufacturer Series: M81824/1;

2-520407-2

TE Connectivity

TE Connectivity's 2-520407-2 is a UL-approved PUSH-ON TERMINAL for 18 AWG wire with a rated voltage of 600 V. Featuring 0.82 mm2 wire cross section, it is ideal for female terminal applications in various industries.

MS25036-148

Panduit

RING TERMINAL; Additional Features: COPPER; Wire Gauge: 16 AWG; Voltage (Rated): 300 V; Safety Approval: UL; No. of Ways: 1;

1379

Advanced Interconnections

PCB TERMINAL; Terminal Gender: FEMALE;

395311004

Molex

Molex 395311004 is a modular terminal block with 4 ways, rated for 300V voltage and 15A current. It uses solder fastening method and is mounted on board. Ideal for applications requiring secure electrical connections in limited space.

320565

TE Connectivity

RING TERMINAL; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Safety Approval: UL; Wire Cross Section: 2.62 mm2; No. of Ways: 1;

1977210000

Weidmueller & Kg

1977210000 by Weidmueller & Kg is a BARRIER STRIP TERMINAL BLOCK with 3 ways, rated for 14.5A current and 160V voltage. It is mounted on BOARD using SOLDER fastening method, approved by CSA and UL. Ideal for industrial applications requiring secure electrical connections.

M81824/1-2

Tri-star Electronics International

WIRE TERMINAL; Wire Gauge: 16 AWG; Manufacturer Series: M81824/1;

MS25036-106

TE Connectivity

FORK TERMINAL; Additional Features: NYLON; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Wire Cross Section: 2 mm2; Safety Approval: UL;

231-136/001-000

Wago

Wago 231-136/001-000 is a STRIP TERMINAL BLOCK with 6 ways, rated for 12A current and 630V voltage. It features BOARD mounting and CCA, UL safety approvals. Ideal for secure electrical connections in various applications requiring reliable terminal blocks.

1SNK705010R0000

TE Connectivity

TE Connectivity's 1SNK705010R0000 is a DIN RAIL modular terminal block with UL safety approval. Rated for 600V voltage, it supports 12 AWG wire gauge and 2.5mm2 wire cross section, handling up to 20A current. Ideal for industrial applications requiring secure electrical connections on DIN rails.

395350522

Molex

Molex 395350522 is a 22-way strip terminal block with rated voltage of 300V and current of 15A. It uses connector fastening method and is mounted on board. Ideal for applications requiring secure electrical connections in various electronic devices.

18615

Beau Interconnect

BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Additional Features: PANEL MOUNT, PHENOLIC, 94V-0; Wire Gauge: 12 AWG; Voltage (Rated): 300 V;