1786840 by Phoenix Contact

Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

1786840

Manufacturer

Phoenix Contact
Manufacturer's Part Number

1786840
Description

BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: CONNECTOR; Additional Features: STANDARD: UL 94V-0, LCP; Voltage (Rated): 160 V; No. of Decks: 1;
Datasheet

Datasheet

Not In Stock

Popular Products

BSS138BKW,115

NXP Semiconductors

NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.

Details

RN41N-I/RM

Microchip Technology

Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.

Details

1N4148

Unitrode

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SMBJ18CA

Bytesonic Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

SPC TECHNOLOGY/ MULTICOMP

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

SMBJ18CA

Pro-an Electronic

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;

Details

LL4148

Transys Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

USB2514BI-AEZG

Microchip Technology

USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.

Details

2N2222A

Microchip Technology

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;

Details

BAV99

Sensitron Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Sensitron Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Kec

RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;

Details

BSS138

General Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;

Details

FDLL4148

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

SMBJ18CA

Telefunken Microelectronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Infineon Technologies

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138

NXP Semiconductors

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;

Details

1N4148WS

Sinyork

RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;

Details

SS14

Microsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Aeroflex/metelics

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;

Details

1786840 Technical Details

TYPE	DESCRIPTION
Mounting Style:	Board
Other Names:	1786840-ND DMC1,5/3-G1-3,5P20THR 277-9775 DMC153G135P20THR
Total Ways:	6
Product Type:	Barrier Strip Terminal Block
Safety Compliance:	CB; CUL; UL; VDE
Additional Features:	Standard: UL 94V-0, LCP
Total Rows:	2
Fastening Style:	Connector
Rated Current:	8 A
Total Decks:	1
Rated Voltage:	160 V

Category Top Products

18721-50 by Beau Interconnect

18721-50

Beau Interconnect

BARRIER STRIP TERMINAL BLOCK; Mounting Type: CABLE; Fastening Method: SCREW; Additional Features: PANEL MOUNT, PHENOLIC, 94V-0; Wire Gauge: 12 AWG; Voltage (Rated): 300 V;

1725711 by Phoenix Contact

1725711

Phoenix Contact

Phoenix Contact 1725711 is a BARRIER STRIP TERMINAL BLOCK with 8 ways, rated for 6A current and 160V voltage. It uses SCREW fastening method, supports wire gauge up to 20 AWG (0.5 mm2), and has safety approvals from CSA, CUL, EAC, and UL. Ideal for BOARD mounting applications in various industries.

320563 by TE Connectivity

320563

TE Connectivity

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Wire Cross Section: 2 mm2; No. of Ways: 1;

2-327583-1 by Tyco Electronics Amp

2-327583-1

Tyco Electronics Amp

BUTT TERMINAL; Wire Gauge: 14 AWG; Wire Cross Section: 2.62 mm2; Terminal Gender: FEMALE;

1196 by Zierick Manufacturing

1196

Zierick Manufacturing

WIRE TERMINAL; Manufacturer Series: 1196;

190060001 by Molex

190060001

Molex

PUSH-ON TERMINAL; Wire Gauge: 18 AWG; Terminal Gender: FEMALE;

MSTB2.5/2-ST-5.08 by Phoenix Contact

MSTB2.5/2-ST-5.08

Phoenix Contact

Phoenix Contact's MSTB2.5/2-ST-5.08 is a 2-way barrier strip terminal block with a rated voltage of 250V and current of 12A, suitable for 12 AWG wires. It features screw fastening and safety approvals like CB, CSA, UL, making it ideal for industrial applications requiring secure wire connections.

395311004 by Molex

395311004

Molex

Molex 395311004 is a modular terminal block with 4 ways, rated for 300V voltage and 15A current. It uses solder fastening method and is mounted on board. Ideal for applications requiring secure electrical connections in limited space.

MS25036-116 by Tyco Electronics Amp

MS25036-116

Tyco Electronics Amp

RING TERMINAL; Wire Gauge: 8 AWG; Terminal Gender: FEMALE; Wire Cross Section: 10.5 mm2;

222-413/VE00-2500 by Wago

222-413/VE00-2500

Wago

Wago 222-413/VE00-2500 is a BARRIER STRIP TERMINAL BLOCK with 3 ways, rated for 20A current and 600V voltage. It supports wire gauge up to 12 AWG and wire cross section of 3.31 mm2, suitable for CABLE mounting applications with safety approvals like ABS, CUL, EN/EC, PSE, UL.

PMNF1-3R-C by Panduit

PMNF1-3R-C

Panduit

RING TERMINAL; Wire Cross Section: 1 mm2; Terminal Gender: FEMALE;

2-31890-1 by TE Connectivity

2-31890-1

TE Connectivity

TE Connectivity 2-31890-1 is a UL-approved FEMALE RING TERMINAL for 22 AWG wire with a rated voltage of 300V. Featuring a wire cross section of 1.42 mm2, it is ideal for various terminal block applications in electrical systems.

2-320571-2 by TE Connectivity

2-320571-2

TE Connectivity

TE Connectivity 2-320571-2, a UL-approved RING TERMINAL for 16 AWG wire with 300V rating. Ideal for FEMALE terminals in applications requiring 1.42 mm² wire cross section.

1711738 by Phoenix Contact

1711738

Phoenix Contact

Phoenix Contact 1711738 is a BARRIER STRIP TERMINAL BLOCK with 3 ways, rated for 24A current and 400V voltage. It accepts wire gauge up to 12 AWG and wire cross section of 2.5 mm2, mounted on board using screws. Ideal for industrial applications requiring secure electrical connections.

2-34124-1 by TE Connectivity

2-34124-1

TE Connectivity

RING TERMINAL; Wire Gauge: 16 AWG; Terminal Gender: FEMALE; No. of Ways: 1; Safety Approval: UL; Wire Cross Section: 2 mm2;

1843606 by Phoenix Contact

1843606

Phoenix Contact

The Phoenix Contact 1843606 is a UL-approved BARRIER STRIP TERMINAL BLOCK with 160V rated voltage and 8A current. It features a BOARD mounting type and CONNECTOR fastening method, suitable for applications requiring secure electrical connections in limited space environments.

173 by Zierick Manufacturing

173

Zierick Manufacturing

LUG TERMINAL;

725964-2 by TE Connectivity

725964-2

TE Connectivity

PCB TERMINAL; Terminal Gender: MALE; Safety Approval: UL;

165565-1 by TE Connectivity

165565-1

TE Connectivity

TE Connectivity 165565-1 is a female push-on terminal with UL approval for 16 AWG wire, rated at 300V. Ideal for applications requiring a 1.5 mm2 wire cross-section, such as automotive and industrial electrical connections.

640903-1 by TE Connectivity

640903-1

TE Connectivity

TE Connectivity's 640903-1 is a UL-approved PUSH-ON TERMINAL for 18 AWG wire with a rated voltage of 300V. Featuring a 0.96 mm2 wire cross section, this FEMALE terminal block is ideal for various electrical applications.