Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

M81824/1-1

Manufacturer

Tri-star Electronics International
Manufacturer's Part Number

M81824/1-1
Description

WIRE TERMINAL; Wire Gauge: 20 AWG; Manufacturer Series: M81824/1;
Datasheet

Datasheet

Not In Stock

Popular Products

OPA2227UA

Texas Instruments

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

Details

2N7002

Nte Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;

Details

M39029/58-360

Itt Cannon

CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;

Details

NE555D

STMicroelectronics

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

SMBJ18CA

Silicon Standard

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M39029/58-360

Positronic Industries

CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;

Details

SN65HVD230DR

Texas Instruments

SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.

Details

1N4148

Microsemi

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

4554

Jw Miller Magnetics

Other Semiconductors;

Details

LM358N

Samsung

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

SMBJ18CA

KYOCERA AVX

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Cheng-yi Electronic

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358N

Motorola

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

ULN2803A

Rochester Electronics

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;

Details

BAV99

Sangdest Microelectronics (Nanjing)

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Shanghai Lunsure Electronic Technology

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

CRG0805F10R

TE Connectivity

TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.

Details

1N4148WS

Daco Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358N

Onsemi

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

2N2222A

Solid State Devices

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

M81824/1-1 Technical Details

TYPE	DESCRIPTION
Product Type:	Wire Terminal
Product Series:	M81824/1
Wire Gauge:	20 AWG

Category Top Products

1059

Ntt

LUG TERMINAL; Additional Features: MATERIAL: STEEL; FINISH: TIN;

190070040

Molex

PUSH-ON TERMINAL; Wire Gauge: 10 AWG; Manufacturer Series: 19007; Terminal Gender: FEMALE;

41480

Tyco Electronics Amp

TAB TERMINAL; Terminal Gender: MALE; Manufacturer Series: 41480;

34137

TE Connectivity

BUTT TERMINAL; Wire Gauge: 14 AWG; Terminal Gender: FEMALE; Wire Cross Section: 2 mm2; Safety Approval: UL;

1-796634-2

Tyco Electronics Amp

STRIP TERMINAL BLOCK; Mounting Type: CABLE; Fastening Method: SCREW; Additional Features: STANDARDS: IEC 998-1/998-2-1, PA 6-6, 94V-0, POLARIZED; Wire Gauge: 12 AWG; Voltage (Rated): 300 V;

MS-25036-124

Molex

RING TERMINAL; Manufacturer Series: MS-25036; Terminal Gender: FEMALE;

1SNK506212R0000

TE Connectivity

TE Connectivity's 1SNK506212R0000 is a DIN RAIL mounted MODULAR TERMINAL BLOCK with UL safety approval. It supports wire gauge up to 10 AWG, voltage rating of 300V, and current rating of 30A. Ideal for applications requiring a compact terminal block solution with 2 ways and 2 decks.

1217861-1

TE Connectivity

TAB TERMINAL; Safety Approval: UL; Terminal Gender: MALE;

4164

Advanced Interconnections

MODULAR TERMINAL BLOCK; Fastening Method: SCREW; Wire Gauge: 0 AWG; Voltage (Rated): 600 V; No. of Ways: 8; Current (Rated): 255 A;

MSTB2.5/2-ST-5.08

Phoenix Contact

Phoenix Contact's MSTB2.5/2-ST-5.08 is a 2-way barrier strip terminal block with a rated voltage of 250V and current of 12A, suitable for 12 AWG wires. It features screw fastening and safety approvals like CB, CSA, UL, making it ideal for industrial applications requiring secure wire connections.

3555

Keystone Electronics

PUSH-ON TERMINAL; Terminal Gender: FEMALE;

20020332-G081B01LF

Amphenol Communications Solutions

20020332-G081B01LF by Amphenol is a BARRIER STRIP TERMINAL BLOCK for BOARD mounting. It supports 12 AWG wire gauge with 2.5 mm2 wire cross section and rated for 300V voltage & 10A current. Ideal for applications requiring secure electrical connections in industrial settings.

DNF14-250FIB-3K

Panduit

PUSH-ON TERMINAL; Wire Gauge: 14 AWG; Terminal Gender: FEMALE;

54

Cinch Connectivity Solutions

STRIP TERMINAL BLOCK; No. of Decks: 1; No. of Ways: 6;

3007

Ntt

LUG TERMINAL; Additional Features: MATERIAL: STEEL; FINISH: TIN;

733-362

Wago

Wago 733-362 is a STRIP TERMINAL BLOCK with 2 ways, rated for 150V/4A. It uses CONNECTOR fastening method and has safety approvals from ABS, CCA, CSA, DNVGL, EN, IEC. Ideal for BOARD mounting applications in various industries.

1787344

Phoenix Contact

Phoenix Contact 1787344 is a 2-row BARRIER STRIP TERMINAL BLOCK with 16 ways and 8A rated current. It has a wire gauge of 15 AWG, voltage rating of 160V, and wire cross section of 1.5mm². Ideal for BOARD mounting, it holds safety approvals like CB, CUL, EAC, UL, VDE for secure connections in various applications.

1SNK705010R0000

Abb

MODULAR TERMINAL BLOCK; Mounting Type: DIN RAIL; Wire Gauge: 12 AWG; Voltage (Rated): 600 V; Current (Rated): 20 A; No. of Ways: 1;

12129493

Delphi Connection Systems

PUSH-ON TERMINAL; Wire Cross Section: 3 mm2; Manufacturer Series: 12; Terminal Gender: FEMALE;

DRA1-CMX60D10

Crydom

The Crydom DRA1-CMX60D10 is a modular terminal block with 4 ways, rated for 60V and 10A. It features DIN rail mounting and screw fastening method, approved by CE and UL. Ideal for industrial applications requiring secure electrical connections in control panels.